Love your videos, particularly the crawling ones. Watch them all as they appear with my mid morning tea here in the UK. That said please don't go the Bangood route and leave that for the lower quality UA-camrs. Thanks 👍
well that tank is a good one. I do all kinds of RC's so I mix it up quite a bit. There are some other banggood vehicles I want like their all metal monster truck and the H1 Humvee, just don't like the prices on them.
At least you’ll know what’s good /tough or how to make it that way with joe. Unlike most of the other guys. Joe’s been at RC’s long enough to where he has a $h¥£load of knowledge when it comes to cross reference parts fits. Which is the most valuable info & knowledge in this stuff. So I say joe should have at it. Cuz he will always buy get the kooler stuff anyways. And you will get plenty more knowledge on retrofits . And as long as you go BIG BLOCK ON EVERYTHING FROM BANGOOD,THAT IS SOMETHING NOBODY IS REALLY DOING WITH THOSE LIKE I INOW YOU CAN. LOL. And people will appreciate when they findout that they can put bangood parts on a traxxas or something. Lol. And that’s the best way to learn that kind of knowledge. So you guys shouldn’t evr try to limit the man on what he wants to get. Because you will only benefit from it. Which is a perspective I’m sure you two didn’t think of. SO I SAY AGAIN ,GET WHAT YOU WANT JOE !!
Exocaged RC Joe. You get what you want to get. You will only get whats kool anyways. & Cuz I know even tho others has got them too.... I know we will learn something we didn’t from the others. Especially when it comes to special fit mods from long forgotten parts on other stuff. Lol. You sure are good at retrofits. Lol.
I like the fact that you're reviewing not so expensive RC's....nice video. Funny that I actually bought the tank from Banggood a couple month's back. The tank is awesome!!👍
I reviewed this truggy when first released a few months back, it crapped out the diffs and esc cut out plus motor overheated within mins of taking it out for its first “very light” bash test! I wasn’t the only one it happened to either, a few other reviewers and many people that commented on my review video had the same issues. I followed it up with a second tear down video, maybe XLF saw this and fixed all the issues since then, who knows! But I couldn’t recommend it
Hmm. Well I showed everything I put it through in one session. Only cuts were the moments of nothing, you know how that is. I was impressed with it especially after stuffing it into the wall. I’ve seen the Spirit version of it and that one seems to have more power.
Excellent bash test there on this cheap brushless truck! It took everything you threw at it! I reviewed this as well only a few weeks ago, with expectation it would break based on all the negative reviews out there on this. But to my surprise it withstood my thrashing. XLF must have addressed the issue. Great video mate! seeya around
They are easy to work on parts galore, fairly priced for replacement parts and a great starter and something that's awesome to the kids that's not going to hurt them too bad...🤣🤜🤛👍 You got that thing ripping around pretty good awesome video!
HEY Joe?? ! . Don’t listen to the people saying ,to not do bangood stuff. These peps don’t realize how much knowledge they can get from you when it comes to cross fits & hop ups. Which the others on here are not near as good at ,especially when it comes to cross fitting parts from way back when RC’s was kinda slow . These people will be happy when they find out they can upgrade a traxxas or arma with stuff from bangood. AND JOE BUYING THAT STUFF IS THE BEST WAY FOR HIM TO FINDOUT THAT STUFF and pass on that knowledge to us WITHOUT HAVING TO BUY ALL OF THIS BS OURSELVES. LOL. . JOE HAS A WEALTH OF RC PARTS KNOWLEDGE GOINH BACK LONG BEFORE BRUSHLESS EVEN CAME OUT. LOL. I’m not saying he’s old. Lol. He’s just been into this stuff as long as I have. AND THEY ARE A WEALTH OF KNOWLEDGE that we can get from joe buying whatever bangood stuff he thinks is kool to get. Besides. It’s not like it’s easy to get content every day. SO I SAY WITH GOOD REASONS...KEEP BUYING WHAT EVER YOU WANT JOE ! I WOULD JUST SUGGEST? THAT YOU DO A “BIG BLOCK YOUR BANGOOD DAY “& EVERY WEEK IF YA WANT LOL Because I know we will learn a lot when it comes to cross fitting parts & upgrades even for name brand stuff! Let me know what ya think about the “BIG BLOCKING YOUR BANGOOD DAY” video. ?? Lol. I know that’s not being done by nobody else ...or Atleast done well & like I know you can anyways joe 💁♂️.
Well thanks! As far as big blocking it I have a few options but I need to see what the bolt pattern is on the stock motor. In all honesty I feel a simple esc swap would make it run way way better.
@@ExocagedRC Let’s see it ? Lol. I think a Momba x should fit nicely. I’m seeing where some people are having problems with the metal tracks. But I think you could get that fixed. Lol. And with a big block in it to turn them ,it should be pretty Kool. Lol. That would be a fun video joe. You should do it. Just to offer something quiet a bit different from the others reviews of it. Lol.
I'm surprised the diffs didn't strip out. All the other reviews they did. I wanted to buy this but was concerned about that diff. Looks like yours did ok.
😂😂😂😂. I CANT WAIT TO SEE HOW OL BIG BLOCK JOE HOPS UP THAT TANK !!!! Lol. You gotta do it joe. I wanna see a max 6 w/a Tekken motor in that thing man !!! 😂😂👍
Btw joe ...I think some of those combined esc & radios will take a 3s battery. I’ve seen where it’s something like 3 out of 4 cars that has those will take the 3s . That one looks like the wl toys 14001581 or something like that. Idk Lol. Buggy. You know the one I’m thinking of. It’s all over the UA-cam . But anyways. That one looks like the same esc combo. & it will take a 3s.
Nice little truck here. I might get this for nephew for Christmas. Dod you think I could put a mamba xl2 in it with the 800kv? Lol... To the mooooooonnn
Those trucks are such bait, i have pretty much identical. The 2 in 1 brushless esc crapped out super fast, plugged motor into 40 amp esc and it kept overheating, burned later during normal use. Stock shocks are horrible, cannot be oil filled. Parts exist but only from Chinese sites. This might be decent chassis for electronic swap, add better shocks and tires and it would be fun but at this point you could just get branded used rolling chassis from eBay for this price.
@@ExocagedRC the one I have have just a bolt flattened on one end with no piston, bottom unscrews but there are no seals or even place to put ones yourself. But then again, those cars are sold under different brand names with slight changes, maybe yours is better.
what is it about rc cars that makes you want to drive them full force into your shins. did it with my trx6 the other day it has a metal bumper so it felt great on the bone
@@ExocagedRC Seriously? I bought this car watching your channel, I'm waiting to arrive and I knew I wouldn't regret it! you are the best, thanks and have a great day! hugs from Brazil!🇧🇷🇧🇷🇧🇷
would you know what kinds of batteries i can upgrade this to? was thinking of going for something higher than 7.4v and a higher capacity battery like 5000 mAh
@@allenquimin5287 I've only tried the two batteries I showed so far. Just have to find the battery tray size specs and then look at the battery specs to see if they will fit.
Joe u need to check out the jbl cheetah from banggood. It's about 230$ or so but from what I've heard it's insane like blow the doors off a 6-9s keaton fast
this one isn't bad, the tank is fun for sure, they have an all metal 1/10 monster truck I want to get that actually has the same chassis rails that I have on the Superlite, cool looking truck but its about $350 as a roller, I still want it. Also that H1 Humvee, I want that too. Their little tiny 1/16 buggies are pretty bad, had one of those
Love your videos, particularly the crawling ones. Watch them all as they appear with my mid morning tea here in the UK. That said please don't go the Bangood route and leave that for the lower quality UA-camrs. Thanks 👍
well that tank is a good one. I do all kinds of RC's so I mix it up quite a bit. There are some other banggood vehicles I want like their all metal monster truck and the H1 Humvee, just don't like the prices on them.
At least you’ll know what’s good /tough or how to make it that way with joe. Unlike most of the other guys. Joe’s been at RC’s long enough to where he has a $h¥£load of knowledge when it comes to cross reference parts fits. Which is the most valuable info & knowledge in this stuff. So I say joe should have at it. Cuz he will always buy get the kooler stuff anyways. And you will get plenty more knowledge on retrofits . And as long as you go BIG BLOCK ON EVERYTHING FROM BANGOOD,THAT IS SOMETHING NOBODY IS REALLY DOING WITH THOSE LIKE I INOW YOU CAN. LOL.
And people will appreciate when they findout that they can put bangood parts on a traxxas or something. Lol.
And that’s the best way to learn that kind of knowledge. So you guys shouldn’t evr try to limit the man on what he wants to get. Because you will only benefit from it. Which is a perspective I’m sure you two didn’t think of. SO I SAY AGAIN ,GET WHAT YOU WANT JOE !!
Exocaged RC Joe. You get what you want to get. You will only get whats kool anyways. & Cuz I know even tho others has got them too.... I know we will learn something we didn’t from the others. Especially when it comes to special fit mods from long forgotten parts on other stuff. Lol. You sure are good at retrofits. Lol.
I like the fact that you're reviewing not so expensive RC's....nice video. Funny that I actually bought the tank from Banggood a couple month's back. The tank is awesome!!👍
I reviewed this truggy when first released a few months back, it crapped out the diffs and esc cut out plus motor overheated within mins of taking it out for its first “very light” bash test! I wasn’t the only one it happened to either, a few other reviewers and many people that commented on my review video had the same issues. I followed it up with a second tear down video, maybe XLF saw this and fixed all the issues since then, who knows! But I couldn’t recommend it
Hmm. Well I showed everything I put it through in one session. Only cuts were the moments of nothing, you know how that is. I was impressed with it especially after stuffing it into the wall. I’ve seen the Spirit version of it and that one seems to have more power.
Excellent bash test there on this cheap brushless truck! It took everything you threw at it! I reviewed this as well only a few weeks ago, with expectation it would break based on all the negative reviews out there on this. But to my surprise it withstood my thrashing. XLF must have addressed the issue. Great video mate! seeya around
thanks, yeah I expected failure as well but it just kept on going.
Nice, it's teens and adults, love this rc buggy, but needs improvement on upgrades, not bad, it needs to gear up. 😉👍 Good review on this.
Thanks for reviewing the imports!
They are easy to work on parts galore, fairly priced for replacement parts and a great starter and something that's awesome to the kids that's not going to hurt them too bad...🤣🤜🤛👍 You got that thing ripping around pretty good awesome video!
HEY Joe?? ! . Don’t listen to the people saying ,to not do bangood stuff.
These peps don’t realize how much knowledge they can get from you when it comes to cross fits & hop ups.
Which the others on here are not near as good at ,especially when it comes to cross fitting parts from way back when RC’s was kinda slow . These people will be happy when they find out they can upgrade a traxxas or arma with stuff from bangood. AND JOE BUYING THAT STUFF IS THE BEST WAY FOR HIM TO FINDOUT THAT STUFF and pass on that knowledge to us WITHOUT HAVING TO BUY ALL OF THIS BS OURSELVES. LOL. .
JOE HAS A WEALTH OF RC PARTS KNOWLEDGE GOINH BACK LONG BEFORE BRUSHLESS EVEN CAME OUT. LOL. I’m not saying he’s old. Lol.
He’s just been into this stuff as long as I have. AND THEY ARE A WEALTH OF KNOWLEDGE that we can get from joe buying whatever bangood stuff he thinks is kool to get. Besides. It’s not like it’s easy to get content every day.
SO I SAY WITH GOOD REASONS...KEEP BUYING WHAT EVER YOU WANT JOE !
I WOULD JUST SUGGEST? THAT YOU DO A “BIG BLOCK YOUR BANGOOD DAY “& EVERY WEEK IF YA WANT LOL
Because I know we will learn a lot when it comes to cross fitting parts & upgrades even for name brand stuff!
Let me know what ya think about the “BIG BLOCKING YOUR BANGOOD DAY” video. ?? Lol. I know that’s not being done by nobody else ...or Atleast done well & like I know you can anyways joe 💁♂️.
Well thanks! As far as big blocking it I have a few options but I need to see what the bolt pattern is on the stock motor. In all honesty I feel a simple esc swap would make it run way way better.
@@ExocagedRC
Let’s see it ? Lol. I think a Momba x should fit nicely.
I’m seeing where some people are having problems with the metal tracks.
But I think you could get that fixed. Lol. And with a big block in it to turn them ,it should be pretty Kool. Lol.
That would be a fun video joe. You should do it. Just to offer something quiet a bit different from the others reviews of it. Lol.
AWESOME VIDEO AS ALWAYS BROTHER
I'm surprised the diffs didn't strip out. All the other reviews they did. I wanted to buy this but was concerned about that diff. Looks like yours did ok.
For some, they did get damaged. Watch the video I linked to. Cheap pot metal gears.
the price seems right does good for a toy grade rc. you should do a max budget upgrade build for it
Love your videos and I have a few bangood rc trucks keep up the great videos😋😎
Very impressive. Great video
Looks like a ton of fun man, nice review. Maybe with upgraded oil field shocks would be much better. 😸😸
I'm going to try to just add oil to these and see what happens
Can you do a video on how to replace front drive shaft
I don't have this one anymore
😂😂😂😂. I CANT WAIT TO SEE HOW OL BIG BLOCK JOE HOPS UP THAT TANK !!!! Lol.
You gotta do it joe. I wanna see a max 6 w/a Tekken motor in that thing man !!! 😂😂👍
Btw joe ...I think some of those combined esc & radios will take a 3s battery. I’ve seen where it’s something like 3 out of 4 cars that has those will take the 3s . That one looks like the wl toys 14001581 or something like that. Idk Lol. Buggy. You know the one I’m thinking of. It’s all over the UA-cam . But anyways. That one looks like the same esc combo. & it will take a 3s.
I'd love to stick a little 3s in there and see if it works. I may just have to give it a try.
Exocaged RC lol. I’m counting on it. 👍😂💁♂️
@@ExocagedRC 3s is just fine
Add oil shocks, a better esc, and adjustable tie rods then it’s good
A lot of wicked déjà vu going on?!
Nice little truck here. I might get this for nephew for Christmas. Dod you think I could put a mamba xl2 in it with the 800kv? Lol... To the mooooooonnn
lol This thing would probably die with a full 540 castle system
I had one of these I honestly was hoping the motor was a little bit bigger but it takes one hell of a beating
And they can take a small 3s too
Is it waterproof?
Yes and no
Shallow little grits are okay don't submerge it
@@Fantabiscuit not fully
Those trucks are such bait, i have pretty much identical. The 2 in 1 brushless esc crapped out super fast, plugged motor into 40 amp esc and it kept overheating, burned later during normal use. Stock shocks are horrible, cannot be oil filled. Parts exist but only from Chinese sites.
This might be decent chassis for electronic swap, add better shocks and tires and it would be fun but at this point you could just get branded used rolling chassis from eBay for this price.
shocks won't take oil? That isn't good. I'm not really sure it could take power from a castle system but who knows
Were you running in grass perhaps ? Grass is the #1 motor/ESC killer. It doesn't look like it, but it's like trying to swim in mayonnaise for an RC.
@@ExocagedRC the one I have have just a bolt flattened on one end with no piston, bottom unscrews but there are no seals or even place to put ones yourself.
But then again, those cars are sold under different brand names with slight changes, maybe yours is better.
Sounds like they fix their gearing and diff issues.
what is it about rc cars that makes you want to drive them full force into your shins. did it with my trx6 the other day it has a metal bumper so it felt great on the bone
I don't know man but I can aim for my legs perfectly everytime
Thanks for the video. Would you recommend this or the feiyue fy03h/eachine eat04 for a complete beginner trying to get into this hobby?
Love it!
It looks like a mini revo accept for the shocks and a hair bigger
Nice would have been better if you got the one with the paddle tires to rip up that sand!!!
you should get the tfl bronco from banngood
they have the all metal one that I want but the price is a bit steep for it.
Nice video!
Can it use a 3S battery?
hi my friend, what duration for batery in total? nice car, nice video!!!
Well not really sure. Maybe 20 minutes?
@@ExocagedRC Seriously? I bought this car watching your channel, I'm waiting to arrive and I knew I wouldn't regret it! you are the best, thanks and have a great day! hugs from Brazil!🇧🇷🇧🇷🇧🇷
would you know what kinds of batteries i can upgrade this to? was thinking of going for something higher than 7.4v and a higher capacity battery like 5000 mAh
I don’t think those would fit. Maybe 2200 or a small 3000mah.
@@ExocagedRC so basically, a 3000 mAh would be the biggest i can fit on this rc?
@@allenquimin5287 I've only tried the two batteries I showed so far. Just have to find the battery tray size specs and then look at the battery specs to see if they will fit.
Joe u need to check out the jbl cheetah from banggood. It's about 230$ or so but from what I've heard it's insane like blow the doors off a 6-9s keaton fast
Id like to know what other controller i can buy to work with the fly hal x04pro rc truck fly sjy didnt
Can you fit a regular 5000 hard case lipo battery in it?
nope
Tq sir I,m wondering if I can afford this thing before...but now ...I,m odw to go get this thing from bangood yaaaaaaaa😂
550 Brushless power and 3s next???
Should i get this or the Wltoys 144001
Its possible insert a 3s lipo on this truck?
Not sure if it would take it, as far as the esc part goes
It’s from China did you wait long if so how long
took about a week so not that bad really
What does EXOC stand for?
Exocaged
To the mOoooooon!? Looks like it's worth it?
well for $115 I think so, got full parts breakdown to repair it so maybe?
could one put a 3s battary in it?
Don’t know. I’ve since given this away to my grandson.
But how does it do across the Nasty? 😂
LOL Probably not very well!!
ALL the "cheap" rc cars got started where that company is. Like traxxas, redcat, skyfly, etc.
Which came first, the chicken or the egg?
which came first, well that's a serious question many couples have yet to answer honestly. LOL
Can it handle 3s?
1
Leave the banggood crap alone
this one isn't bad, the tank is fun for sure, they have an all metal 1/10 monster truck I want to get that actually has the same chassis rails that I have on the Superlite, cool looking truck but its about $350 as a roller, I still want it. Also that H1 Humvee, I want that too. Their little tiny 1/16 buggies are pretty bad, had one of those
While I admit banggood does have some crappy stuff this one is a score
Me duele ver a un RC chocar bruscamente y que se doble :( pero para eso estan hechos así que xd
Xlf x03 gift kardo please 🙏🙏🙏🙏 Bhai 🙏🙏🙏🙏