Great video, you’re actually explaining the fundamentals and operations of a sensor/switch rather than just being a parts changer. Awesome job. Need more instructional videos like this on the internet.
Good Job ..... 1980 Mechanic ... didn't realize you can do this test ... 1st I've heard. Thanks Man. My Oil Light Is Blinking On and Off .... Oil was low .. filled it up with 2 bottles and the light still flickering. Car is running fine I think LOL 😂 😂 could be the sensor because when the car is off for hours, when you start it .. the OIL light is off .. goes on during 2,500 RPM in driving mode ..
Is your low oil pressure light on ? Usually if it's not on when you start , then you actually have low oil pressure , meaning you gotta replace the o ring in your oil pan , or your oil pump
This made me go further I carefully cut mine open it looked perfect zero leaks but the contacts inside were black like corroded? Replaced with a new one zero issues for 3,000 miles now (Yamaha Engine) thank you for this video.
WOT,,,,only '57 ' 😮 people managed to post a thank you or comment on this wonderful video out of 156, 000 views !!, shame on you people , it deserves at least 2 Billion 😎 👍
I have a Holden 3.8L V6 Ecotec that takes a one-pin sensor. What would happen if I were to install a three-pin sensor? Some models take a three-pin; others take a one-pin.
i had one piss out of the pin like a founrain on the one pin. Crawled under it and replaced it on the side of the road at repco parts store. I still have the faulty one.
I have a question, when i start my engine i have more than half oil/ good oil pressure. After 15-20mins when the engine is hot drop to zero right away. Like zero oil pressure. Why would do that? Please let me know. My vehicle is 2014 ford f150 .Thank you
helpful vid. ty. on a side note, you sound Irish and also slightly Jamaican. Are you? tyia. also this is not in any way solicitation for any sexual response or activity
Good day, please I have 2012 Hyundai sonata hybrid with oil light keep turning on and off. I have flushed the engine, changed the oil sensor and oil pump but to no avail. Can you please help me out?
Fault code p252f on Mitsubishi asx keep saying check engine oil levels on dash I’ve changed oil my car has a cheap scanner on it so I’ve monitored the the dpf regeneration and it good, would you know how I would get rid of this (check engine oil levels light) could it be the oil pressure sensor faulty
@@falkirk8413 fix this ages ago you need a bi directional scanner to initialise the oil to 1550cc to zero. code finally gone it caused by short trip and the dpf not doing a regen also can be caused by a leak for the intercooler pipe my hose had a hole in it
Hey maybe you know so gonna ask how you’d fix broken wire going into this terminal for it ? Just get new terminal and splice into old wire? 2016 Ford Focus SE.
I like to know when I find the fault not just guess at it. If you just replace the sensor without diagnosing the problem and if the problem persists you still need to test the sensor, or in your case maybe you would replace the muffler, or the o2 sensor or who knows what.
Great video, you’re actually explaining the fundamentals and operations of a sensor/switch rather than just being a parts changer. Awesome job. Need more instructional videos like this on the internet.
Good Job ..... 1980 Mechanic ... didn't realize you can do this test ... 1st I've heard. Thanks Man. My Oil Light Is Blinking On and Off .... Oil was low .. filled it up with 2 bottles and the light still flickering. Car is running fine I think LOL 😂 😂 could be the sensor because when the car is off for hours, when you start it .. the OIL light is off .. goes on during 2,500 RPM in driving mode ..
Is your low oil pressure light on ? Usually if it's not on when you start , then you actually have low oil pressure , meaning you gotta replace the o ring in your oil pan , or your oil pump
Time to go back to college then 🙂
Or u could have some debris on your oil pump strainer I had that once were my pickup sucked some gasket sealer up and it blocked the strainer
This made me go further I carefully cut mine open it looked perfect zero leaks but the contacts inside were black like corroded? Replaced with a new one zero issues for 3,000 miles now (Yamaha Engine) thank you for this video.
Very thorough. Excellent teaching.
Thank you for this your great with explaining the best way you can
Very helpful. I will do this tomorrow. I got an oil pressure light on my motorcycle today.
WOT,,,,only '57 ' 😮 people managed to post a thank you or comment on this wonderful video out of 156, 000 views !!, shame on you people , it deserves at least 2 Billion 😎 👍
Hi great Video very clear .can I ask you if I can use y compression test kit to check oil pressure? Regards barrie
Good advice Gerard, thanks for sharing!
Cheers Max 🙏🙏
Nice multimeter, I have a fluke 77 for 30 something years and love it !
Invaluable advice, Thank you Gerard 👌👍🙏☘️
Thanks Pat, I am sure it will help some people 🙏🙏🙏💪
Brilliant advice thank you, very handy to know.
Thank you Rich
What number key should I be using to open the transmission sensor?
Thank u very much..
That explanation was very educative and practical..
very educative
I have a Holden 3.8L V6 Ecotec that takes a one-pin sensor. What would happen if I were to install a three-pin sensor? Some models take a three-pin; others take a one-pin.
Your connector won’t fit
great video
i had one piss out of the pin like a founrain on the one pin. Crawled under it and replaced it on the side of the road at repco parts store. I still have the faulty one.
That must have been lovely 😕
They can fail pretty bad alright but at least it was in stock 😅
Do you know how the wiring works on these ? I'm swapping the wire on one on an 04, but all the wires are different , except black to black
I have a question, when i start my engine i have more than half oil/ good oil pressure. After 15-20mins when the engine is hot drop to zero right away. Like zero oil pressure. Why would do that? Please let me know. My vehicle is 2014 ford f150 .Thank you
I think there is a problem with my card but I'd to send a video to see if you can get it, thanks
helpful vid. ty. on a side note, you sound Irish and also slightly Jamaican. Are you? tyia. also this is not in any way solicitation for any sexual response or activity
Can you please tell me where is the fuel tank sensor located on a 07 Chevrolet Impala car
Should put link to your garage in the description
Can u please tell me where to locate the one for 2008 chevrolet captiva 2.4 Z24SED
had a few fail and oil travel up the wiring loom.
Had a couple like that over the years too mate 🔧
Good day, please I have 2012 Hyundai sonata hybrid with oil light keep turning on and off. I have flushed the engine, changed the oil sensor and oil pump but to no avail. Can you please help me out?
Fault code p252f on Mitsubishi asx keep saying check engine oil levels on dash I’ve changed oil my car has a cheap scanner on it so I’ve monitored the the dpf regeneration and it good, would you know how I would get rid of this (check engine oil levels light) could it be the oil pressure sensor faulty
Sump oil sensor
@@falkirk8413 fix this ages ago you need a bi directional scanner to initialise the oil to 1550cc to zero. code finally gone it caused by short trip and the dpf not doing a regen also can be caused by a leak for the intercooler pipe my hose had a hole in it
Thanks!
Thank you very much 🙏🙏
Can you please till me where is the fuel tank located on a 07 Chevrolet Impala car
When you get a reading on the multimeter you did not indicate if that is a faulty sensor or if its good
how can bypass a pressure sensor with three cables,sender,line and earthing
Toyota Corolla 2010, if you change the oil in the car, when the oil is in head 2, the car makes a noise. What is the problem?
The lifters are probably ticking as the oil has to be pumped back up into the crankcase.
What about 3 pins?
Cool
Good grief! I think he's used to billing by the hour.
Gracias!
🙏🙏
hey
What. About too high oil pressurel
Taking video lessons from Chris Fix?
Vw is backwards
Why waste all that time for a $8.95 cent part and simple to remove?
Hey maybe you know so gonna ask how you’d fix broken wire going into this terminal for it ? Just get new terminal and splice into old wire? 2016 Ford Focus SE.
Coz I replaced the original with 2 new ones....Oil pressure gauge still reads on the lower end of needle sweep....Thats why....
Mine is $45.00 lmao 🤣
Troubleshooting. Gaining info about your issue
How else is he going to get views drives me nuts when they fu cking natter on and on get to your fu cking vid.
For a cheap part like this, this video is not practical to do all this testing
I came here because my car is boosted and wanted to know how to test . So all were useful to me but I get where you are coming from
I like to know when I find the fault not just guess at it. If you just replace the sensor without diagnosing the problem and if the problem persists you still need to test the sensor, or in your case maybe you would replace the muffler, or the o2 sensor or who knows what.
You repeat yourself too many times. This video could have been done in in 2 minutes.
Thank you 🙏
Can you please till me where is the fuel tank located on a 07 Chevrolet Impala car