Worksharp 3000 Sharpening Station 2 - Update Ep.2016-05

This video has been replace by: • WorkSharp 3000 Work St...
This video is about the Worksharp 3000 Sharpening Station 2 Ep.2016-05 is an update to the previous video Ep.2016-04.
Since Worksharp has discontinued the Tool Work Bar and the Wide Blade Attachment Table, we have to fall back on some previous shop designs and workarounds.
For the Wide Blade Attachment Table I’ll refer you to video #2 on this project at • Worksharp 3000 Sharpen...
Stumpy Nubs Video on Great Tips for Using the Worksharp 3000
• WATCH THIS before buyi...
A viewer did suggest to use a nut below and above the feet of the unit (instead of washers) to allow for a more precise alignment of the table. That may require some changes to the other height designs.
For the Tool Work Bar I am working on a design and will do a video about a Tormek Tool Bar replacement that will work in conjunction with my latest rendition of this workstation • WorkSharp 3000 Work St...
Stay Tuned for More!
See a full build video of the latest ver 3 at this link • WorkSharp 3000 Work St...
This video version gives more information than the first. Being new to UA-cam I am improving my videography skills and content.
Video index at: glcrafts.com/Resources/VideoIn...
I bought this plan, and modified it to suit my needs. Perhaps you will find some of this to work for you as well.
Stumpy Nubs video at: www.youtube.com/watch?v=VU9We...
You can buy the plans at
www.stumpynubs.com/worksharp-3...
It’s about $5. I thought it was worth it rather than trying to reverse engineer it. That takes a lot of time and errors, waste. Also to give Stumpy credit for his work. Stumpy is different, a little philosophical, but he has some great tips, jigs, and projects.
For lathe sharpening techniques see video at Wood Workers Guild of America:
www.wwgoa.com/video/sharpening...
I use the techniques in this a lot. One note is that this video shows him sharpening against the rotation of the disc incorrectly, as per the products instructions. Looking from the top down, the disc rotates in a counter clockwise direction. The cutting edge should not be pointed into the oncoming disc rotation or it may catch or shave off the abrasive. I know as I did that. Maybe WWGOA has a reason for their method.
Tormek makes many great sharpening adapters that work with the tool rest of the Worksharp 3000. I really like the adapter for the gouge shown at 05:55. That is a Tormek# SVS50. The other I showed is a Tormek#SVD186. You can find these at www.sharpeningsupplies.com.
You may find them cheaper on other sites.
-------------------------------------
12-5-2017 Update - I contacted WorkSharp and they told me the WS3000 Tool Bar (that I have attached in this video) was discontinued due to lack of sales.
I love it and the ability to use Tormek jigs. I'm probably going to order myself a spare before they're all gone!
I have found the WS 3000 Tool Bar in stock on eBay at a ridiculous price and at these sites. When their stock is depleted, no more will be available.
Woodcraft.com $50: (OUT OF STOCK NOW) www.woodcraft.com/products/wo...
One of my favorite jigs for this tool bar is the Tormek Gouge Jig SVD-186 $99
At Woodcraft: www.woodcraft.com/products/to...
UA-cam Videos on the Tool Bar and Tormek Jigs:
on Tool Bar
• WS3000 Tool Bar Attach...
on Tormek SVD 186
• WS3000 Tool Bar Attach...
-----------------------------------------
Links to Amazon products that I use and recommend.
www.Amazon.com/shop/GaryLundgrenCrafts
Clicking on this will take you to my Amazon Storefront where you can review, and purchase products featured in my UA-cam videos and that I recommend. Amazon pays me a small commission for items that are sold. This does not increase the price to you. Sometimes it may be less.
These commissions help support this UA-cam channel so I can continue to bring videos to you. I am in the process of building this, so check back often for new items.
-----------
www.GLCrafts.com
DISCLAIMER:
Exercise good shop safety to protect yourself.
I may have safeguards removed in my videos, but that is solely for clarity to demonstrate a process.
Keep your safeguards in place to protect yourself from injury.
• Safety Glasses
• Hearing Protection
• Lung Protection
• Push Sticks and other Guides
All or Portions COPYRIGHTED © 2016 by Gary W Lundgren, dba Gary Lundgren Crafts. All rights reserved.

[@michaelmonteforte787]

Hey Gary I’m just getting ready to make a work station and found your video very helpful. Thanks

[@GaryLundgrenCrafts]

Thank you! Glad it helped. 👍

[@glenngulley1375]

I'm curious about that tool rest be you have, where did you get that, I really wanna make my set up like yours

[@GaryLundgrenCrafts]

Very good question! I had to hunt a little to find that again.
It is a WS3000 Tool Bar Attachment.
It looks that they discontinued that item. I did find one on eBay for about $70 at: www.ebay.com/itm/New-Work-Sharp-WSSA0002601-WS3000-Tool-Bar-Attachment-Edge-Vision-Sharpening-/192227821109?hash=item2cc1abc635

[@GaryLundgrenCrafts]

I found that tool bar was discontinued due to low sales. I did find a couple places that have some in stock.
I have found the WS 3000 Tool Bar in stock on eBay for a ridiculous price.
Woodcraft.com $50: www.woodcraft.com/products/work-sharp-3000-tool-bar-attachment?sku=153685
Sharpening Supplies.com for $60 www.sharpeningsupplies.com/WorkSharp-3000-Tool-Bar-Attachment-P443.aspx?gclid=EAIaIQobChMIwq-yvtnw1wIVEJd-Ch1XBQhrEAEYAiAAEgJecfD_BwE
One of my favorite jigs for this tool bar is the Tormek Gouge Jig SVD-186 $99
At Woodcraft: www.woodcraft.com/products/tormek-gouge-jig-svd-186
or at Sharpening Supplies.com www.sharpeningsupplies.com/Tormek-Gouge-Jig-P354C101.aspx
Same price at both places. $99
I will update the video description with this info.