Hi ! As soon as I watched your video on the Emax Tinyhawk III, I purchased it and Subscribed to your Channel ! As I was trying to verify the binding I took the Canopy screws out in order to reach the Binding Button which is deep inside the Camera Canopy or Housing. After I verified the binding to my satisfaction I noticed a LOOSE RED CABLE ( measures about 1 - 1 1/2 inches long )on the rear right of the circuit board and it is soldered to a point on the Board which reads 5 V. I am not sure if this RED CABLE was already loose or if it goes to a certain soldering spot or if it is a convenient 5V output to be used on some modification...... I will like to know if your Emax Tinyhawk III has this loose cable of if it came loose when I was doing the binding... if it goes somewhere, where is it supposed to go ? The loose end show no wire coming out of it or any solder attached. Please help me out ! Thank you !
I was never going to be able to use these goggles that come with the tiny hawk kit, I am old and need reading glasses now. I got a digiadapter and a rapid fire module today and am now flying my tinyhawk 3 using my dji v2 goggles. 🙂😄😁😀
Sorry, but there's no way this old, super heavy, updated whoop... With a switchable VTX and new cheap camera, is worth a whopping $169 bucks! Damn, that is over priced, especially with proprietary motors and only a 5amp ESC. But, I've thought the under 3" Emax quads have been so ULTRA OVER HYPED for what they are for a long time. For some reason, the 3" and above quads are awesome! No proprietary parts and solid construction and design. I certainly think this is a strong pass. It's an old design updated slightly, that's about twice the weight of the Moblite6 and 7! Well over 30 grams is super heavy for a whoop! AND, "It's all about weight with whoops!" Especially one that's nearly 170 bucks! Forget the HYPE! NO WAY. 😳🙄🥴
Run the escs on 48khz, and make sure you replace the 1s batteries more often mate. I get about 4 minutes on my TH2. If the batteries are over a few months old i get about 2-3 minutes and its lacking power.
I can fly like 5 minits but the goggles off the eachine novice 2 are better than the vr008 pro 2 goggles if i use it for to record my screen makes me angry some times
It's cool but the price for the bnf version is way to high for a whoop. Last year you could literally buy the diatone Roma f5 for the price they want for this tiny little plastic whoop
I was a big fan of the Tinyhawk 1 & 2 , but this is £149 in the uk for the drone alone. Just way too expensive sorry Emax. It’s also the same FC as the 3 inch toothpick they sell for £100.
I feel like the Nanohawk x is way more fun than this drone. Love the intro. There’s no way that TH3 would beat the mobula6 imo. Mob7 seems like a fair fight.
@@AndyRCchannel I would do that, but I haven't subscribed to them. 😆 I just found it hilarious 5 different youtubers from around the world ended up in my notifications all within minutes of each other reviewing the same exact thing and have the same opinion except in multiple different variations of sayings. AndyRC, Albert Kim, BotGrinder, Captain Drone and Nick Burns all in a row except in reverse order. So you uploaded seconds/minutes after Albert Kim. Timing was hilarious. #eMax @eMax
Omg they finally decided to sell rtf with less shity transmitter yay! Still trash but better. Frame looks super weird, it should be called big mac 😂 I wonder why they replaced their good 6 battery charger with useless 2 batteries one btw. Anyway a big no to tinyhawk after mobula 6
Worldwide: bit.ly/3kO1ZI4 BGTINYIII 8%OFF
Battery: bit.ly/3CGm0Xf
love your vids man! just got a diatone taycan and i am so happy to be back into flying
Awesome to hear people coming back
Might get those goggles just for the monitor been looking for a good monitor/ goggle
Hi ! As soon as I watched your video on the Emax Tinyhawk III, I purchased it and Subscribed to your Channel ! As I was trying to verify the binding I took the Canopy screws out in order to reach the Binding Button which is deep inside the Camera Canopy or Housing. After I verified the binding to my satisfaction I noticed a LOOSE RED CABLE ( measures about 1 - 1 1/2 inches long )on the rear right of the circuit board and it is soldered to a point on the Board which reads 5 V. I am not sure if this RED CABLE was already loose or if it goes to a certain soldering spot or if it is a convenient 5V output to be used on some modification...... I will like to know if your Emax Tinyhawk III has this loose cable of if it came loose when I was doing the binding... if it goes somewhere, where is it supposed to go ? The loose end show no wire coming out of it or any solder attached. Please help me out ! Thank you !
Great honest straight forward review. Thanks 🙏
Im mode 1 guy and having a hack for time it’s my Tango 2. Any tips?
Fantastic flying and review, Andy!!! 😃
For me, to be perfect Emax just need to make an ELRS version! 😂
Anyway, stay safe there with your family! 🖖😊
Tinyhawk 2 on 2s rocks outside, definately 1s for indoor fun.
Great video, Andy. Started out with emax, the high price with the little to no improvement on the whoop for $170.00? No way. Se ya, emax.
I was never going to be able to use these goggles that come with the tiny hawk kit, I am old and need reading glasses now. I got a digiadapter and a rapid fire module today and am now flying my tinyhawk 3 using my dji v2 goggles. 🙂😄😁😀
My turtle mode does not work. Is that something I have to enable?? Thanks.
Nice one Andy! How is it that the video was so clear - hardly any static. How did you record it?
Sorry, but there's no way this old, super heavy, updated whoop... With a switchable VTX and new cheap camera, is worth a whopping $169 bucks! Damn, that is over priced, especially with proprietary motors and only a 5amp ESC. But, I've thought the under 3" Emax quads have been so ULTRA OVER HYPED for what they are for a long time.
For some reason, the 3" and above quads are awesome! No proprietary parts and solid construction and design.
I certainly think this is a strong pass. It's an old design updated slightly, that's about twice the weight of the Moblite6 and 7! Well over 30 grams is super heavy for a whoop! AND, "It's all about weight with whoops!" Especially one that's nearly 170 bucks! Forget the HYPE! NO WAY. 😳🙄🥴
Wow, a solid 4 minutes. I’m happy if I get 2.5 out of my TH II.
Run the escs on 48khz, and make sure you replace the 1s batteries more often mate. I get about 4 minutes on my TH2. If the batteries are over a few months old i get about 2-3 minutes and its lacking power.
@@Barks_Bridge_Dog_Training Can I change it in Betaflight or in BL heli?
@@bobg1443 Bl heli M or even the new blue jay config would do it.. You will need to the battery plugged in too when reading the escs.
I can fly like 5 minits but the goggles off the eachine novice 2 are better than the vr008 pro 2 goggles if i use it for to record my screen makes me angry some times
I knew this would happen I just got a th freestyle 2 and a th whoop
It's cool but the price for the bnf version is way to high for a whoop. Last year you could literally buy the diatone Roma f5 for the price they want for this tiny little plastic whoop
I was a big fan of the Tinyhawk 1 & 2 , but this is £149 in the uk for the drone alone. Just way too expensive sorry Emax. It’s also the same FC as the 3 inch toothpick they sell for £100.
That's good !!:)
Ah I hate to admit as a die hard emax fan, happymodel whoops are far ahead of the game in performance and cost half the price...
Everyone made the same video at the samd time, matt, you and Nick where should i look this video?😂👍
Not sure who matt is but who ever you enjoy the most it's all good
@@AndyRCchannel *Matt Pochwat
Don't forget Botgrinder, Captain Drone, Nurk FPV, and Ready Set Drone. 😂 So many tiny hawk 3 videos.
Also nurk hahhahah
I feel like the Nanohawk x is way more fun than this drone.
Love the intro. There’s no way that TH3 would beat the mobula6 imo. Mob7 seems like a fair fight.
I really want emax to revamp the nano hawk the concept of that design is great
I'm sure they will
I've just got 5 notifications of 5 different youtubers reviewing the Emax TinyHawk 3 in a row.
I posted this on the 5 channels.
You should post it to emax not us ;-)
@@AndyRCchannel I would do that, but I haven't subscribed to them. 😆
I just found it hilarious 5 different youtubers from around the world ended up in my notifications all within minutes of each other reviewing the same exact thing and have the same opinion except in multiple different variations of sayings.
AndyRC, Albert Kim, BotGrinder, Captain Drone and Nick Burns all in a row except in reverse order. So you uploaded seconds/minutes after Albert Kim. Timing was hilarious.
#eMax @eMax
£226!
crap
Omg they finally decided to sell rtf with less shity transmitter yay! Still trash but better. Frame looks super weird, it should be called big mac 😂 I wonder why they replaced their good 6 battery charger with useless 2 batteries one btw.
Anyway a big no to tinyhawk after mobula 6
The Mobula 6 is awesome. Well, I have the HD version, but I have heard the 6 is great too.
first :)