I rig up a belt squat with my barbell, a land mine, and a dip belt. All things most people already have, and if not, can get for around 100 bucks (minus the barbell). I end up standing on two 45 bumpers to allow a better range or motion. Considering I spent nothing extra to get up and running, I'd take it over this setup any day. I load the weight on with my mini deadlift jack, and because the barbell is long, the arc angle is acute enough that you barely feel it in the movement. Just something I thought people might want to try before they go out spending hundreds if not thousands of dollars.
I’m glad you mentioned the load distribution of what you are actually lifting. Since it’s lever action and you stand behind the weight you aren’t lifting the true amount of weights on the attachment. I had a PowerTec. I calculated and actually used a scale to determine what % of the load I was lifting. The most consistent % I determined is I was lifting 70% of the load.
The issue of shearing force can be remedied by using a wedge board backwards, meaning under the toes, such to match the angle of the lever arm at the bottom. As mentioned, get the SquatMax if comfort is the concern
I've had this for about a year. I like it. I've been doing back squats since I was 16. I'm 49 now and just really don't want to be loading up my back anymore. I made a simple wood stand so I can start from standing. Pretty straight forward, gets the job done.
@@carlpirkle3175 I'm 5'8",depending on you squat belt really. My old one I could squat my butt all the way down. I bought a new one that's a little longer so I made a platform about 31/2 inches high and I can go all the way down.
Agreed and I usually just suggest lever arms if someone wants a set up like this, but I think this is one of those cases where it just makes sense to spend a little more or nothing at all. Generally not a fan of the way this thing loads (impaling your chest), the angles, or having to get into position. At least the Sorinex has a kick stand.
I use my Bells of Steel Jammer arm. It's not great, but serves a job for the very few occasions I use it. I managed to get the whole thing for $120 used.
Yeah I tried top-loading my lever arms for belt squats with calibrated 25 kg plates and it was nearly impossible to unload :D The only problem with the jammer arms is getting into position. For now, my best solution was to use a ropeand a carabiner from the top of the rack. Maybe some has a better solution, like a diy self-releasing kick stand.
I use this as an accessory piece to my Heavy deadlift days. I like it because I don't have to go heavy. It will pull you forward so I actually sort of stand right over it being 6'6". But it does help offset my Heavy Back squat days. And I don't have the space for an actual machine so this was the BEST option for $220 bucks.
This gets me excited. I am unable to load a barbell heavy because of a previous neck injury. I have been looking at options to go heavy on legs and this might be my solution. Thanks for reviewing a solid budget friendly option!
The lever arm is so short that you need a ton of weight and 220 bucks isnt even that cheap. You can make a longer and massive belt squat lever from wooden beam and some steel pipe. Without much equipment or woodworking skill.
@@WhoFlungDung don't even need a landmine, put a plate at one end for the hinge, soft loop tie down strap on the knurling towards the other side to attach to the belt/carabiner, and load the plates on that side of the bar. Use a single side deadlift jack on a block or on its side, to raise the bar to start. put feet on blocks/bumper plates/portable steps for extra depth. The felt load will be higher than a lever arm as the belt is between the load and hinge. And will go higher the closer you place the belt towards the hinge, but will need more plates on the other end to counter balance
Amazing stuff! All your vids are so well done and very helpful. I was wondering if you could answer a question for me. Have you ever used any of these custom meal plan tools? I got one from Next Level Diet to help me add some muscle and I actually like their plans. Was just wondering if you've heard of or tried any of them yourself. Thank you!
I ordered the Revolt belt sqt last year. I got the one with the horizontal weight arms. It also has a built in kickstand to start the lift from the top. Came with a cheap belt too. I told 2 friends about it. For some reason they were sent the version you show. Paid the same price a I did.
The Bells of Steel arms fit a 2.3 x 2.3 upright. I think they just released a line of 3x3 racks and attachments so that is worth looking into if you have a 3x3 rack. If you're gonna use collars, keep in mind you'll have to buy their collars as the sleeves are a different size. Regular 2" collars won't work. I highly recommend BOS though. Love everything I've gotten from them.
@9:30 if you would like to fix the lever issue you could build a box. This thing would sit INSIDE the box. Now you're squatting pretty much up and down.
I have one and stopped using it. It takes up so much of the sleeve that unless you have thin, calibrated, expensive plates, you're quickly running out of space. Also, you have to rig up something to stand on for more elevation for 45lb plates to clear any decent ROM. I wanted to like it as a cheap and easy way to belt squat, but it left me disappointed.
I bought this belt squat because ot uses up hardly any space. I like the pump you get from it. I go heavy and have had upper of 5 plates on this thing. It handles it well but the bummer is you need to make a little stand with a piece of 4x4 so you can get the thing around your waist otherwise you waste a ton of energy holding it up while getting into position. Overall I really like the thing and it has helped my overall squat jump.
One of the biggest problems I see with these (or jammer/lever arms) is how short the lever is and the inability to place your hands onto something (which makes this exercise way more comfortable). My DIY solution was to purchase a short upright, use pin/pipe safeties to thread through the upright holes, place in the middle of your rack, place 2x jhooks on ur rack and put the barbell on to hold ur hands. You will need a rack with holes all the way around the upright because the whole belt squat is outside ur rack like in this revolt although its centered and not off of one upright. Definitely need a weight horn to bolt on top of the spare upright. You also need to do some cutting with an angle grinder to get the perfect upright length, etc.
I’ve been using this attachment for around 4 weeks and generally like it. For those worried about scratching their rack I added moleskin on the inside to prevent scratches. I’ve never been a huge fan of squats but find I’m enjoying them more and more with this attachment. Overall I think it’s a good addition to my home gym. Now I just need to make a kickstand. I’m thinking a 4x4 with an old jack handle attached.
I think the best praise a product can get is from a person who doesn't like what it does, but is now doing it because of the product. Props to you and enjoy your sessions!
There is a guy on IG that does A LOT of projects for DIY folks. He built an awesome belt aquat out of 4 x 4s and some 2 x 2 and eyelet hooks that is cheap and carries massive weights.
I have this and use it for the reasons you've explained. After years of Jiu Jitsu, my back is a little effed. Loading up the bar on my spine makes it feel worse. This attachment isn't perfect, but I really enjoy it. Pain free squats. :)
I bought a couple of 2" plate storage pins and bolted them to a jammer arm. Bolted on with wing nuts, they are quick to put on and take off. The plates load from the side on my jammer arms, but that's because they don't have holes on all four sides. I could drill it from the top and it would be just like this purpose built thing. Using a jammer arm, that's one less thing to store and it gives a multi use bit of kit that does more than the bespoke belt squat attachment. You still need to buy a strong eyebolt and a belt, but it's better value for money. I also use the weight pins and a jammer arm for leg extensions and leg curls. Slip a pad around one of the plate pins and load the weights on the other pin and it works fine. Given the choice between a purpose built belt squat like this and a modified jammer arm, I'd buy jammers and take the additional exercise options every time.
when my son was recovering from labrum surgery we rigged up a belt squat with a Spud belt, a Spud loading pin, and some chain, hook, and carabiners. He would stand on a couple of metal plyobox stands with the weight on another box and then he would lift it up a few inches and his friend would pull the box away. Conversely we had a couple of aluminum ramps and he would duck walk up the ramp. Simple and cheap. the loading pin would be used with some attachments (grenades) to use for dip work. Between the belt squats and sled pulls he was able to maintain his lower body until he recovered from surgery and could start using his upper body (he played football in HS and college).
I went with CORE BLASTER SQUAT ATTACHMENT WITHOUT BELT from elite fts. It has a nice jack $165 before the 15% code they had in January (Jan15) I have a spud belt and land mine set up already so it ended up being worth it.
Bells of steel just released their new Hydra lever arms. They can lock at 7 different positions and have a trolley system for adjustments. All for $550 shipped. Would appreciate a review for these as they are brand new with no reviews yet
Great review. I'm as value-minded as they come, and the challenge a piece of equipment like this has is that the truly most budget-friendly option for a level squat rack attachment is just to make it yourself out of 2x4's and bolts/pipe. There's dozens of tutorials on YT and different styles, but they all work about the same.
@@billybrown7953 Because when you squat 4-5 slots and deadlift 3-4 slots a week, the belt squat is an awesome accessory lift to continue to drive stress in the quads.
@@BM-si2ei Strange, out of all of my 62 years on earth I have never seen anyone use one of these. Just another piece of garbage. PS... WTF is a ...slot? LOL 😂
@@billybrown7953 advanced lifters think about their training week and sessions in slots, where you can manage exercise selection with fatigue accumulation. Just something you have to do as you get stronger. At 62, not something you really need to worry about at this point, you're just trying to manage weakening. Wish you the best!
@@BM-si2ei Sorry ,SOY BOY. No one I've ever met in many gyms ever used that term. Strange, I see no picture of you anywhere. By the way SOY BOY ... I use a REAL SQUAT RACK.
Nice so you buy the weight arm for a seated calf raise by itself. I personally use a dip belt with kettlebells and boxes. Definitely appreciate all the work you and your team do Coop. I still haven't quite figured out how to have a compact set up for reverse hypers.
Simple solution to the lever sway on a squat is to make the arm reciprocating on a internal tension spring keeping the squat movement parallel as the arm moves in and out limiting the reciprocation buy adding stopper dowels
I’ve had this for awhile now and I can’t seem to get comfortable with it. When I go heavy on it, it pulls me a lot more forward than it pulls me down in the squat. So I feel like I am constantly battling it. When I use it, it’s typically in a circuit with lighter weight and more reps. Or at the end of a leg workout to do a couple sets to failure.
Have you tried it turned around with your ass facing the rack? If not, would you be so kind as to try it and then tell us if this fixes any of those issues?
@@billybrown7953 Agree 100 percent, been to many gyms from NY to Florida and overseas and never seen anyone do these things and never seen a gym with one of those things. Looks like another thing that people will buy because they DON'T WANT TO SQUAT .
I'm seeing price wise the cheapest belt squad is actually the super squats belt from iron mind. requires more setup for sure but at a reduced cost even compared to this. would love a review of it 😁😁
yes and no. The higher pivot point makes a difference but you can easily build a lever belt squat yourself, with a longer leaver arm and much cheaper than 220 bucks.
@@billybrown7953 well yes but I am not saying do this instead of squats - a belt squat is often for people with limitations that don't want to load the spine but still work the legs
I *really* wish someone company would make a combo belt squat / seated calf raise attachment. Seems to make so much sense but I can’t find one anywhere.
Coop: You reviewed both the the Revolt Belt Squat and the Titan Stealth Leg Press devices. You gave them both favorable reviews. If you had to use only one of them, which one would you use? Why?
I feel like even the way Coop says the word "budget" is hard for him 😂 In all seriousness though I love the channel but it's really nice to see more features on budget items
Future reviews: BOS reverse hyper/Ghd combo. Interchangeability of air bike monitors. Quick size comparison of the big three open trap bars. Versaclimbers
I use a dip belt, lever arm, and extra rack weight post to make my own version of this. It was ~$200 from Bells of Steel and I have the added benefit of also having lever arms. But it won't fit most racks like this one does.
I have this and cannot load it enough to get a benefit... There was also a lot of metal shavings I had to shakeout before use sounded like an etch a sketch...
Is that belt more comfortable than just the typical chain style? After a couple hundred lbs the chain starts digging into your inners, your mind can't focus on the lift.
This is really cool but I'd love if they cut out some 1 inch holes along the side of the arm, so you can slap on some leg rollers and utility pins and use if to leg curls and leg extensions
Nice alternative if space and budget is a concern. A better alternative is elitfit CORE BLASTER SQUAT ATTACHMENT. The weight ratio is closer to 1 to 1. Buy it on sell for the holidays and save a few bucks. Plus you can do more with it for the arms and shoulders. Luv mine. Have a shoulder injury and not able to lift at the moment? With the core blaster squat or any belt squat you are able to work out the legs while recovering from the shoulder injury.
Thanks for the video Coop! Why wouldn't you just hang a weight directly from your belt? This thing is around +-250,- online. You can get some HEAVY kettlebells for less. Interested in your opinion!
How have people found the customer service from Revolt? I purchased one in the UK which wasn't engineered properly (weights post is too wide to fit 2" plates), this was 6+ months ago and am still yet to get a reply to send a replacement - overall not impressed.
Can you review the FORCE USA Leg Extension and Curl Attachment? It’s compatible with most of their G-series racks but I haven’t seen any reviews on it yet
I’m wondering whether I can use a Marrs-bar instead of a belt squat apparatus to take weight off my spine. You have used all these pieces of equipment. I’d like your opinion. Thanks so much
I have the belt squat attachment and think it's good but you're right about the felt weight being a lot less than what you're putting on. I wish the weight sleeve was a bit longer as if you're using bumper plates you can't load that much on it (something like 4-5x 55lbs). If I had the slimmer metal plates then I think I'd be happier with the amount it could load. With that said, I can still get a great workout in if I just do more reps so it's great for what it is and the price point. I'm happy with the purchase as it's simple, versatile enough, and you can get a good leg workout in if you just do more reps.
I'd like to see the amazon Fitness Reality squat rack power cage with lat pull down attachment. I don' think you've ever covered the lat pull down on it.
Please do a review on manual incline treadmills. Much more realistically priced than a curved treadmill for most people and seems like a viable alternative to a sled as well. There's a Sunny Health & Fitness one for ~$400 that seems decent, but reviews for this type of treadmill are basically non existent.
The reviews we need are budget versions of the most expensive items. You have covered alot of them. The accessories are nice too. I really liked the collar video. Have you do e a review on lifting shoes?
Could this work with a wall mounted 20 hole rack piece like the one from Titan Fitness? I have that for my ghd setup but no full rack. Wondering if the rotation would tear up the wall
I’ve been looking at getting a belt squat rig. My concern is I had my low back fused at L4-L5 and at L5-S1 (4 titanium rods, 6 titanium screws). This is the area of the lumbar spine where the belt is located. Concerns???
I rig up a belt squat with my barbell, a land mine, and a dip belt. All things most people already have, and if not, can get for around 100 bucks (minus the barbell). I end up standing on two 45 bumpers to allow a better range or motion. Considering I spent nothing extra to get up and running, I'd take it over this setup any day. I load the weight on with my mini deadlift jack, and because the barbell is long, the arc angle is acute enough that you barely feel it in the movement. Just something I thought people might want to try before they go out spending hundreds if not thousands of dollars.
I’m glad you mentioned the load distribution of what you are actually lifting. Since it’s lever action and you stand behind the weight you aren’t lifting the true amount of weights on the attachment. I had a PowerTec. I calculated and actually used a scale to determine what % of the load I was lifting. The most consistent % I determined is I was lifting 70% of the load.
The issue of shearing force can be remedied by using a wedge board backwards, meaning under the toes, such to match the angle of the lever arm at the bottom. As mentioned, get the SquatMax if comfort is the concern
I've had this for about a year. I like it. I've been doing back squats since I was 16. I'm 49 now and just really don't want to be loading up my back anymore. I made a simple wood stand so I can start from standing. Pretty straight forward, gets the job done.
do you have a pic of that wood stand? just trying to see how i can do that too
@@GravyBoat I just cut a 2x4 to height and nailed a base to it. Took about 2 minutes. I'm sure someone has a YT video.
@@_SLAVEONE_ thank you!
For someone 5’6”, will I have any problem squatting down deep enough before the bar rests on the floor?
@@carlpirkle3175 I'm 5'8",depending on you squat belt really. My old one I could squat my butt all the way down. I bought a new one that's a little longer so I made a platform about 31/2 inches high and I can go all the way down.
Agreed and I usually just suggest lever arms if someone wants a set up like this, but I think this is one of those cases where it just makes sense to spend a little more or nothing at all. Generally not a fan of the way this thing loads (impaling your chest), the angles, or having to get into position. At least the Sorinex has a kick stand.
Well said!
I use my Bells of Steel Jammer arm. It's not great, but serves a job for the very few occasions I use it. I managed to get the whole thing for $120 used.
Yeah h have to play around With the set up
Yeah I tried top-loading my lever arms for belt squats with calibrated 25 kg plates and it was nearly impossible to unload :D
The only problem with the jammer arms is getting into position. For now, my best solution was to use a ropeand a carabiner from the top of the rack. Maybe some has a better solution, like a diy self-releasing kick stand.
Check out CFT Performance for arms and other stuff. Very raw/basic but good
Appreciate the review coop! Love seeing the budget reviews 👍🏽
I use this as an accessory piece to my Heavy deadlift days. I like it because I don't have to go heavy. It will pull you forward so I actually sort of stand right over it being 6'6". But it does help offset my Heavy Back squat days. And I don't have the space for an actual machine so this was the BEST option for $220 bucks.
This gets me excited. I am unable to load a barbell heavy because of a previous neck injury. I have been looking at options to go heavy on legs and this might be my solution. Thanks for reviewing a solid budget friendly option!
I like the look of Madewell Strength's. Some little differences. Check it out.
have you tried zercher squats?
I actually saw that variation for the first time the other day. Are they pretty effective? Is it difficult to go heavy due to the grip?
Get some light bands and do 300 reps per day. Your neck will heal.
The lever arm is so short that you need a ton of weight and 220 bucks isnt even that cheap. You can make a longer and massive belt squat lever from wooden beam and some steel pipe. Without much equipment or woodworking skill.
Exactly...I made one using wood and a steel pipe
That’s the one I got
Would a raised landmine work?
@@WhoFlungDung don't even need a landmine, put a plate at one end for the hinge, soft loop tie down strap on the knurling towards the other side to attach to the belt/carabiner, and load the plates on that side of the bar. Use a single side deadlift jack on a block or on its side, to raise the bar to start. put feet on blocks/bumper plates/portable steps for extra depth. The felt load will be higher than a lever arm as the belt is between the load and hinge. And will go higher the closer you place the belt towards the hinge, but will need more plates on the other end to counter balance
@@GoldenEraBookwormyou’re watching a youtube gear review channel and you’re expecting him to make a belt squat out of a pipe and 2x4s?
Amazing stuff! All your vids are so well done and very helpful. I was wondering if you could answer a question for me. Have you ever used any of these custom meal plan tools? I got one from Next Level Diet to help me add some muscle and I actually like their plans. Was just wondering if you've heard of or tried any of them yourself. Thank you!
I didn’t even know a belt squat that didn’t eat up space existed. Thanks Coop
I made one of these many years ago with a 2 x 4, some pipe and a belt from my old telecom climbing days...worked great for squats.
I ordered the Revolt belt sqt last year. I got the one with the horizontal weight arms. It also has a built in kickstand to start the lift from the top. Came with a cheap belt too. I told 2 friends about it. For some reason they were sent the version you show. Paid the same price a I did.
The Bells of Steel arms fit a 2.3 x 2.3 upright. I think they just released a line of 3x3 racks and attachments so that is worth looking into if you have a 3x3 rack. If you're gonna use collars, keep in mind you'll have to buy their collars as the sleeves are a different size. Regular 2" collars won't work. I highly recommend BOS though. Love everything I've gotten from them.
They have one now it's called the Hydra line uses actual 3x3 uprights with 5/8" holes
@9:30 if you would like to fix the lever issue you could build a box. This thing would sit INSIDE the box. Now you're squatting pretty much up and down.
Would definitely like to see a GGR review of the Ironmaster Cable Tower attachment. Not many reviews out there on it.
What about the EliteFTS core blaster? It goes onto a barbell and uses a landmine which a lot of people have
I have the EliteFTS Coreblaster and feel it is easily the best choice unless you have the room and budget for a stand alone belt squat machine.
I too agree. I also have the Core Blaster and it is easy to set up with a
I have one and stopped using it. It takes up so much of the sleeve that unless you have thin, calibrated, expensive plates, you're quickly running out of space. Also, you have to rig up something to stand on for more elevation for 45lb plates to clear any decent ROM. I wanted to like it as a cheap and easy way to belt squat, but it left me disappointed.
I bought this belt squat because ot uses up hardly any space. I like the pump you get from it. I go heavy and have had upper of 5 plates on this thing. It handles it well but the bummer is you need to make a little stand with a piece of 4x4 so you can get the thing around your waist otherwise you waste a ton of energy holding it up while getting into position. Overall I really like the thing and it has helped my overall squat jump.
One of the biggest problems I see with these (or jammer/lever arms) is how short the lever is and the inability to place your hands onto something (which makes this exercise way more comfortable). My DIY solution was to purchase a short upright, use pin/pipe safeties to thread through the upright holes, place in the middle of your rack, place 2x jhooks on ur rack and put the barbell on to hold ur hands. You will need a rack with holes all the way around the upright because the whole belt squat is outside ur rack like in this revolt although its centered and not off of one upright. Definitely need a weight horn to bolt on top of the spare upright. You also need to do some cutting with an angle grinder to get the perfect upright length, etc.
I’ve been using this attachment for around 4 weeks and generally like it. For those worried about scratching their rack I added moleskin on the inside to prevent scratches. I’ve never been a huge fan of squats but find I’m enjoying them more and more with this attachment. Overall I think it’s a good addition to my home gym. Now I just need to make a kickstand. I’m thinking a 4x4 with an old jack handle attached.
I think the best praise a product can get is from a person who doesn't like what it does, but is now doing it because of the product. Props to you and enjoy your sessions!
What belt is he using? Looks like the Henney
I have a mini deadlift jack and I just use that as a kickstand
There is a guy on IG that does A LOT of projects for DIY folks. He built an awesome belt aquat out of 4 x 4s and some 2 x 2 and eyelet hooks that is cheap and carries massive weights.
I have this and use it for the reasons you've explained. After years of Jiu Jitsu, my back is a little effed. Loading up the bar on my spine makes it feel worse. This attachment isn't perfect, but I really enjoy it. Pain free squats. :)
Do you do a lot of inversions?
@@thetrueolivia A bit. :)
I’m 5’ 6”. Will I have to use something to stand on to get good depth? I’m concerned about the bar touching the floor before getting down deep enough.
@@carlpirkle3175 I'm 5'6" as well. I just adjust the chain length from my belt. :)
whats a good budget belt squat belt to go with it?
I bought a couple of 2" plate storage pins and bolted them to a jammer arm. Bolted on with wing nuts, they are quick to put on and take off. The plates load from the side on my jammer arms, but that's because they don't have holes on all four sides. I could drill it from the top and it would be just like this purpose built thing. Using a jammer arm, that's one less thing to store and it gives a multi use bit of kit that does more than the bespoke belt squat attachment. You still need to buy a strong eyebolt and a belt, but it's better value for money. I also use the weight pins and a jammer arm for leg extensions and leg curls. Slip a pad around one of the plate pins and load the weights on the other pin and it works fine. Given the choice between a purpose built belt squat like this and a modified jammer arm, I'd buy jammers and take the additional exercise options every time.
how do you you for leg extensions and leg curls?
when my son was recovering from labrum surgery we rigged up a belt squat with a Spud belt, a Spud loading pin, and some chain, hook, and carabiners. He would stand on a couple of metal plyobox stands with the weight on another box and then he would lift it up a few inches and his friend would pull the box away. Conversely we had a couple of aluminum ramps and he would duck walk up the ramp. Simple and cheap. the loading pin would be used with some attachments (grenades) to use for dip work. Between the belt squats and sled pulls he was able to maintain his lower body until he recovered from surgery and could start using his upper body (he played football in HS and college).
I went with CORE BLASTER SQUAT ATTACHMENT WITHOUT BELT from elite fts. It has a nice jack $165 before the 15% code they had in January (Jan15) I have a spud belt and land mine set up already so it ended up being worth it.
Bells of steel just released their new Hydra lever arms. They can lock at 7 different positions and have a trolley system for adjustments. All for $550 shipped. Would appreciate a review for these as they are brand new with no reviews yet
LOL, sounds like more useless garbage, just like this garbage on here.
Looks very similar to the Coahuila Iron one I’ve got. Solid addition to any gym.
Great review. I'm as value-minded as they come, and the challenge a piece of equipment like this has is that the truly most budget-friendly option for a level squat rack attachment is just to make it yourself out of 2x4's and bolts/pipe. There's dozens of tutorials on YT and different styles, but they all work about the same.
Really ... a .... challenge? Why not just challenge yourself on a squat rack like a real man ?
@@billybrown7953 Because when you squat 4-5 slots and deadlift 3-4 slots a week, the belt squat is an awesome accessory lift to continue to drive stress in the quads.
@@BM-si2ei Strange, out of all of my 62 years on earth I have never seen anyone use one of these. Just another piece of garbage. PS... WTF is a ...slot? LOL 😂
@@billybrown7953 advanced lifters think about their training week and sessions in slots, where you can manage exercise selection with fatigue accumulation. Just something you have to do as you get stronger. At 62, not something you really need to worry about at this point, you're just trying to manage weakening. Wish you the best!
@@BM-si2ei Sorry ,SOY BOY. No one I've ever met in many gyms ever used that term. Strange, I see no picture of you anywhere. By the way SOY BOY ... I use a REAL SQUAT RACK.
Do a Total Gym review. You wouldn’t believe the versatility of it.
Signature fitness selling the exact product for $79.
Nice so you buy the weight arm for a seated calf raise by itself. I personally use a dip belt with kettlebells and boxes. Definitely appreciate all the work you and your team do Coop. I still haven't quite figured out how to have a compact set up for reverse hypers.
Could you stand on a wedge? Do you think that would positively affect that shearing feeling you spoke about on your knees
Simple solution to the lever sway on a squat is to make the arm reciprocating on a internal tension spring keeping the squat movement parallel as the arm moves in and out limiting the reciprocation buy adding stopper dowels
I’ve had this for awhile now and I can’t seem to get comfortable with it. When I go heavy on it, it pulls me a lot more forward than it pulls me down in the squat. So I feel like I am constantly battling it. When I use it, it’s typically in a circuit with lighter weight and more reps. Or at the end of a leg workout to do a couple sets to failure.
Have you tried it turned around with your ass facing the rack? If not, would you be so kind as to try it and then tell us if this fixes any of those issues?
Gee, why not just squat like a real man would .... with a squat rack. LOL 😂
@@billybrown7953 lol why not do both? 😘
@@billybrown7953 how about for the multiple reasons coop outlined in the first 30seconds of this video???
@@billybrown7953 Agree 100 percent, been to many gyms from NY to Florida and overseas and never seen anyone do these things and never seen a gym with one of those things. Looks like another thing that people will buy because they DON'T WANT TO SQUAT .
What type of belt is that, Coop? Do you have a preference for a certain belt for belt squat attachments?
Finally getting back to form I see.
I'm seeing price wise the cheapest belt squad is actually the super squats belt from iron mind. requires more setup for sure but at a reduced cost even compared to this. would love a review of it 😁😁
You got it. Combine it with the loading pin and away you go
@@nikstraub1598I actually prefer the barbell and just use a lifting strap in front to balance it.
Can you not do this with some kind of landmine, something to elevate your feet (bumpers, cinder blocks?) and a dip belt?
yes, Elite FTS sells that. I stand on two small plyo boxes to increase range of motion. It works good, a bit of a pain to set up.
yes and no. The higher pivot point makes a difference but you can easily build a lever belt squat yourself, with a longer leaver arm and much cheaper than 220 bucks.
Just threw together a Frankenstein Viking press landmine last night. Sore
Or ,you could just do REAL SQUATS. Using a.... SQUAT RACK.
@@billybrown7953 well yes but I am not saying do this instead of squats - a belt squat is often for people with limitations that don't want to load the spine but still work the legs
Coop, there is a company out there called Signature Fitness that offers this type of belt squat attachment for $79.99 with free shipping.
I *really* wish someone company would make a combo belt squat / seated calf raise attachment. Seems to make so much sense but I can’t find one anywhere.
That looks very versatile, thanks for the review!
Coop: You reviewed both the the Revolt Belt Squat and the Titan Stealth Leg Press devices. You gave them both favorable reviews. If you had to use only one of them, which one would you use? Why?
Any suggestion for where to connect it ? I don't have a rack. I appreciate if you tell me links or names of brands
The Revolt hip belt squat inspired my own DIY version. I used a 5 foot long pipe, easier on the knees.
Coop, there’s a belt squat on Amazon exactly like this for $69.99
For owners of equipment like the inspire FT2, couldn't a belt be used with pullies to achieve the same movement or is there enough weight?
Have you tried doing two arm bent over rows on it? With a reg bar attached.....
I feel like even the way Coop says the word "budget" is hard for him 😂 In all seriousness though I love the channel but it's really nice to see more features on budget items
Future reviews:
BOS reverse hyper/Ghd combo.
Interchangeability of air bike monitors.
Quick size comparison of the big three open trap bars.
Versaclimbers
I use a dip belt, lever arm, and extra rack weight post to make my own version of this. It was ~$200 from Bells of Steel and I have the added benefit of also having lever arms. But it won't fit most racks like this one does.
I have this and cannot load it enough to get a benefit... There was also a lot of metal shavings I had to shakeout before use sounded like an etch a sketch...
The short lever definitely causes issues for those wanting to go heavy. Always love your feedback Rodolfo!
@@GarageGymReviews Thank you and as always thank you for the content
I really like this piece of equipment. totally something I'd add to my rack at home.
Is that belt more comfortable than just the typical chain style? After a couple hundred lbs the chain starts digging into your inners, your mind can't focus on the lift.
This is really cool but I'd love if they cut out some 1 inch holes along the side of the arm, so you can slap on some leg rollers and utility pins and use if to leg curls and leg extensions
Just get a 34-35" lever arm and a shackle, done. What's different with this one?
Whats that belt called you use??? where do you get? thanks
Have you tried the rep belt squat attachment on the ares?
Coop, is it ok to just use a weighted dip belt for belt squats or should I buy a real belt for belt squatting?
@Garage Gym Reviews COOP amazing work as always! Will you please do a Titan fitness vertical leg press review!?
for anyone needing a jack all you need is 2 2x4s at different heights works perfectly
Coop ha e u reviw the sorinex j squat? Dies it pull u forward too like other leverahe arms?
Nice alternative if space and budget is a concern.
A better alternative is elitfit CORE BLASTER SQUAT ATTACHMENT. The weight ratio is closer to 1 to 1. Buy it on sell for the holidays and save a few bucks. Plus you can do more with it for the arms and shoulders. Luv mine. Have a shoulder injury and not able to lift at the moment? With the core blaster squat or any belt squat you are able to work out the legs while recovering from the shoulder injury.
Thanks for the video Coop! Why wouldn't you just hang a weight directly from your belt? This thing is around +-250,- online. You can get some HEAVY kettlebells for less. Interested in your opinion!
How does the Revolt Belt Squat compare with the Black Widow Training Gear Belt Squat attachment?
How have people found the customer service from Revolt? I purchased one in the UK which wasn't engineered properly (weights post is too wide to fit 2" plates), this was 6+ months ago and am still yet to get a reply to send a replacement - overall not impressed.
Can you do a review on the Signature Fitness belt squat? Looks really good and only $60 on Amazon
I have it
@@Farquad76.547 Good product ? Thanks
If you can coop , hack squat / leg press/ leverage squat machines review ?
the post doesnt work with rogue competion bumpers. but works with echo bumpers
Can you review the FORCE USA
Leg Extension and Curl Attachment? It’s compatible with most of their G-series racks but I haven’t seen any reviews on it yet
I’m wondering whether I can use a Marrs-bar instead of a belt squat apparatus to take weight off my spine. You have used all these pieces of equipment. I’d like your opinion. Thanks so much
I just need a belt that has a loop at the very front. Most of them have two to each side. Can someone let me know if you know where I can get one.
Can you review their leg extension?
I would like to see a review and drop test of the Rep Fitness 1000-Series Power Racks
I have the belt squat attachment and think it's good but you're right about the felt weight being a lot less than what you're putting on. I wish the weight sleeve was a bit longer as if you're using bumper plates you can't load that much on it (something like 4-5x 55lbs). If I had the slimmer metal plates then I think I'd be happier with the amount it could load. With that said, I can still get a great workout in if I just do more reps so it's great for what it is and the price point. I'm happy with the purchase as it's simple, versatile enough, and you can get a good leg workout in if you just do more reps.
I'd like to see the amazon Fitness Reality squat rack power cage with lat pull down attachment. I don' think you've ever covered the lat pull down on it.
Will this work with the Vesta smith machine 3 in 1?
i'm thinking you could do the same sort of setup with a landmine, barbell and dip belt
I made the same thing with half piece of leftover 2x4 and a piece of 3/4 inch pipe.
They come with the stand also makes it very easy
I would like to know the inexpensivee smith machine
Wow. Thank you for that. Can u do one for leg press please ?
What belt works best with this attachment?
My squat rack is not bolted down..will this flip it over?
COOP! REVIEW THE SQUATMAX MD!!!
Does the work with 3/8 rep racks?
Quick question, do you lift or do you crossfit? Jw
Love it Coop! Thanks. I think that using a belt with a chain similar to that of the Pitshark might allow for more fluid motion using the Revolt!
I know this is an older video but, do you think this would fit the sm1 squat rack ?
Would you recommend this for someone with bad knees? I want one, but when you said “sheer forces”, I immediately thought hell no lol.
Please do a review on manual incline treadmills. Much more realistically priced than a curved treadmill for most people and seems like a viable alternative to a sled as well. There's a Sunny Health & Fitness one for ~$400 that seems decent, but reviews for this type of treadmill are basically non existent.
Would love to see you show how you would make a kickstand to this
The reviews we need are budget versions of the most expensive items. You have covered alot of them. The accessories are nice too. I really liked the collar video. Have you do e a review on lifting shoes?
Could this work with a wall mounted 20 hole rack piece like the one from Titan Fitness? I have that for my ghd setup but no full rack. Wondering if the rotation would tear up the wall
Not sure if you did this one already, but what about a budget sled
At 219 it's not the cheapest alternative. Signature fitness has virtually the exact same attachment for 69.
Hey Coop does this attachment fit the T3 Titan rack?? I’ve been on the fence about it and have been doing a landmine style belt squat which sucks
Coop, will it work on a 2x2 power rack and if so does it come spacers to fill in the one inch gap?
I’ve been looking at getting a belt squat rig. My concern is I had my low back fused at L4-L5 and at L5-S1 (4 titanium rods, 6 titanium screws). This is the area of the lumbar spine where the belt is located. Concerns???
Yes but just be careful with the workout in the beginning 💪
COOP do some ethos brand stuff including plates and the ethos rack