This video saved my life! When i read the manual i didn’t understand anything, then i saw this tutorial and it literally saved me approximately like 3 hours.
Hello. Do you know of if there is any air filter inside the unit? Once it sucks air into to water, there should be a filter for the air... and how to clean it? Thanks
Trying to set it up the Madrid for the first time having trouble. The doughnut inflated perfectly, but the hot tub will not inflate. Does anyone know what we are doing wrong?
I have not owned a lay z spar for years I just bought one end of season sale are the floaters in the Madrid box I bought a pool starter kit it’s got powdered chlorine …. I still have 6year old multifunction tablets in my garage
Is it okay to use chloride in way smaller form than used in the video. The cloride i have are way smaller bits that i think i just have to add to the water
Hi, The only tablets we can think of like that are these: www.lay-z-spa.co.uk/clearwater-mini-qik-tablets.html They're intended to give a quick boost of chlorine. Ideally or ongoing water treatment, you should use slow release tablets in the dispenser or granules which can be dissolved then added to the water.
Thank you for this maybe you should have a code on the instructions that takes you here as the manual is terrible and I’m normally good at these things
What about the reset button??? Instructions say use a thin object to press the button in, but there's a large pea size button(labeled reset), and no hole?? Heater has been on for 4hr and water is at 35 degrees still (we filled it with 34 degree water) and we had it set to 37?? I pressed in the reset button with a finger, is it just press and done? Should the heater be on or off? Filter on or off? Device on or off?? Should the display change? How do we know the reset was done successfully? Instructions are bad. And at this point idk if my spa is even heating??
If you intend on using it frequently, say at least once or twice a week, we would recommend keeping it setup. Many Lay-Z-Spa users leave theirs setup all year round.
@@crystalfurrow2310 we recommend using Clearwater Chemicals. The Clearwater Hot Tub Starter Kit is a great choice for beginners as it comes with a chemical guide and includes all the chemicals that you need to get started.
Is the floor supposed to inflate too? Its not in the instructions or video, but there is a valve down there. It does not want to inflate, but I just don't understand why it is there?
Hi Cheryl, The ChemConnect is for slow dissolving tablets such as Chlorine or the ClearWater Multifunction tablets. pH +/- comes in granules which should be dissolved in a small amount of water then applied directly into the Lay-Z-Spa.
The thing t5hat you screw into the compressor to inflate is full of holes! The air just blows straight out of it! I had a load of mysterious bits I have no idea what they are for!
I had to bring heather box inside so it would start up...10 min inside .if not it displays error code E03....had it inside for 10 min ..and connect then no erroe code ..... walla everything works .it takes time to warm water to 10 c then it heats up
I fill mine up half way with the water on cold and fill the other half with warm. Else you will be waiting hours for it to warm up! And yh you can just use the hose from your tap👍
Hi Chris, You need to very carefully (for your own safety) pour a bit of boiling water into the pipe to loosen the plastic and make it mouldable, then attempt to reshape the pipe.
My pump exactly the same as this makes a high pitch noise when the bubbles are on. Drives me mad I can’t relax. Any solutions to solve would be great I have tried everything.
I have just found that the pipe feeds the air into the tub might be the issue. Once connected and I ran the bubbles on I then turned off. I loosened the pipe and air came out until the water the came out after. Tightened back up and the noise is gone.
The fix is the pipe that feeds the air for he bubbles once connected run the bubbles turn off then loosen the pipe and let the air out until water comes out. Problem solved.
i fill with warm water it takes ages and loads of power to heat cold water. ive got an attachment that fits over my mixer taps in the kitchen and fill with a mix of hot and cold
@@Hustl3club i dont know what its called but if you go to B&Q youll find them in the hose pipe section. your hose connects to the bottom and then it fits over your mixer tap, mine is grey and yellow. costs about a fiver
Hi there, this is happening because the air temperature is low and the freezeshield function is kicking in. You can trick the pump by putting some warm water in the pipes to get around this.
A bit confused as to why the video is showing an attachment on top of the one above the filter. that's the one to float in the spa with the chlorine tablets in. no wonder people having trouble heating there hot tubs if they follow this.
I am still confused about step 2, what is it sitting in, and there is not instruction between inflating the hot tub and inflating the number 2 bottom pad so how do they go together??
This video saved my life! When i read the manual i didn’t understand anything, then i saw this tutorial and it literally saved me approximately like 3 hours.
u really opened the manual did it have anything interesting in it lol
Thank you for this video. The manual is hot garbage. This video is perfect.
sure is.i came here looking for the same thing.
Correct!
The manual made me want to commit murder
Video saved the day! We thought you just had to tap the on button, but really you have to hold it down
Very clear and helpful. Thankyou.
Thank you thank you thank you 👏 was at my wits end until i found this tutorial.
Probably the worst manual I have come across.
Thanks so much this video really helped with setting up. Brilliant 👍
Yeah great vid 👍
Thank the instructions were usleless will be sharing the video for others who hv the same spa
Thank U so much, kind regards fr ana fr the heart of Australia Dalby Queensland ❤
This. Video. Saved. My life 🎉🎉🎉🎉
Yep, for a £500 product......the manual is an absolute embarrassment.
It’s so basic how are you so dense
Hello. Do you know of if there is any air filter inside the unit? Once it sucks air into to water, there should be a filter for the air... and how to clean it? Thanks
Why the manual isn’t just a QR code to a video like this heaven only knows 🤔🤷♂️ thank you this is great for us first timers 🙏
hey, did you get one? hows it after 1 yr?
I’m struggling to heat up the hot tub, the temperature won’t stay on 38 and it jump temperature and it decreases it’s stayin on 21 degree
Trying to set it up the Madrid for the first time having trouble. The doughnut inflated perfectly, but the hot tub will not inflate. Does anyone know what we are doing wrong?
The deflation part is in a different order to what it says in the manual?
Thankyou very helpfull
Se le puede agregar sales de baño al lay-z-spa?
Nice video
What are the healthiest chemicals for the skin we can buy? Do you have a starting kit to recommend? Please post a link.
I have not owned a lay z spar for years I just bought one end of season sale are the floaters in the Madrid box I bought a pool starter kit it’s got powdered chlorine …. I still have 6year old multifunction tablets in my garage
Please help, how to set timers I don’t get how plz help
Is it okay to use chloride in way smaller form than used in the video. The cloride i have are way smaller bits that i think i just have to add to the water
Hi,
The only tablets we can think of like that are these: www.lay-z-spa.co.uk/clearwater-mini-qik-tablets.html
They're intended to give a quick boost of chlorine. Ideally or ongoing water treatment, you should use slow release tablets in the dispenser or granules which can be dissolved then added to the water.
Thank you for this maybe you should have a code on the instructions that takes you here as the manual is terrible and I’m normally good at these things
What about the reset button??? Instructions say use a thin object to press the button in, but there's a large pea size button(labeled reset), and no hole??
Heater has been on for 4hr and water is at 35 degrees still (we filled it with 34 degree water) and we had it set to 37??
I pressed in the reset button with a finger, is it just press and done? Should the heater be on or off? Filter on or off? Device on or off?? Should the display change? How do we know the reset was done successfully?
Instructions are bad.
And at this point idk if my spa is even heating??
mine never gets like that when you store it..lol...and it leaks air
My question is can you leave it permanently inflated and covered up to use someother time?
Or must you always deflate and drain after use?
If you intend on using it frequently, say at least once or twice a week, we would recommend keeping it setup. Many Lay-Z-Spa users leave theirs setup all year round.
@@Lay-Z-Spa-UK what chemicals do we use?
@@crystalfurrow2310 we recommend using Clearwater Chemicals. The Clearwater Hot Tub Starter Kit is a great choice for beginners as it comes with a chemical guide and includes all the chemicals that you need to get started.
Is the floor supposed to inflate too? Its not in the instructions or video, but there is a valve down there. It does not want to inflate, but I just don't understand why it is there?
Hi Sean,
The base is padded but does not inflate.
The valve you see is for drainage and leads to the drainage pipe.
Do I put tablets in Chen connect and use the ph plus/ph minus, or is it one or the other?
Hi Cheryl,
The ChemConnect is for slow dissolving tablets such as Chlorine or the ClearWater Multifunction tablets. pH +/- comes in granules which should be dissolved in a small amount of water then applied directly into the Lay-Z-Spa.
Very informative, but for future presentations let it be known that this is the worst music ever heard on a UA-cam video.
I am volkswagen technician by trade and i can tell that you can use manual only to start fire and that's it
The thing t5hat you screw into the compressor to inflate is full of holes! The air just blows straight out of it! I had a load of mysterious bits I have no idea what they are for!
The holes are there to keep the pressure at a standard rate I think. Prevents over inflation.
I had to bring heather box inside so it would start up...10 min inside .if not it displays error code E03....had it inside for 10 min ..and connect then no erroe code ..... walla everything works .it takes time to warm water to 10 c then it heats up
Thank you . I never fix this with the terrible manual. 🥰
Can you use the hose water or do you have to put warm water into it aswell? X
I fill mine up half way with the water on cold and fill the other half with warm. Else you will be waiting hours for it to warm up! And yh you can just use the hose from your tap👍
If I may ask how do I heat up the hot tub? As I’m struggling and the temperature won’t stay on 38 it decreases
@@shaznewhite1598 It may be turning off on you when reaching the set tempeture?
My water intake port connection is bent really bad, I think that it is affecting my filtering. Can someone please help
Hi Chris,
You need to very carefully (for your own safety) pour a bit of boiling water into the pipe to loosen the plastic and make it mouldable, then attempt to reshape the pipe.
@@Lay-Z-Spa-UK can it be replaced
incredible tutorial thank you so much they should just provide this link instead of their stupid ass manual in chinese
The manual is almost there to throw you off
My pump exactly the same as this makes a high pitch noise when the bubbles are on. Drives me mad I can’t relax. Any solutions to solve would be great I have tried everything.
Could be defective. I’d reach out to the manufacturer and see what they say
I have just found that the pipe feeds the air into the tub might be the issue. Once connected and I ran the bubbles on I then turned off. I loosened the pipe and air came out until the water the came out after. Tightened back up and the noise is gone.
The fix is the pipe that feeds the air for he bubbles once connected run the bubbles turn off then loosen the pipe and let the air out until water comes out. Problem solved.
i fill with warm water it takes ages and loads of power to heat cold water. ive got an attachment that fits over my mixer taps in the kitchen and fill with a mix of hot and cold
What attachment is that? I need it because it takes too long to heat up
@@Hustl3club i dont know what its called but if you go to B&Q youll find them in the hose pipe section. your hose connects to the bottom and then it fits over your mixer tap, mine is grey and yellow. costs about a fiver
As soon I press bobble button on to inflate hot tub the heater turning on automatically and error e02 is on.
Hi there, this is happening because the air temperature is low and the freezeshield function is kicking in. You can trick the pump by putting some warm water in the pipes to get around this.
@@Lay-Z-Spa-UK you're the best uwu
The deflation part of the video is a bit vague
agreed
It just deflates like a ball or lilo usually would.
@@Alan_H It doesn't mate . You need to use the additional pipe to blow the air out of it otherwise it doesn't go down completely
Still confused lol she blew up the floor and didn't place it in the hot tub?
The extra bit she blew up goes on the top not for the floor of the pool
@@helenekquaynorI realised this the day I done it lol thank you
A bit confused as to why the video is showing an attachment on top of the one above the filter. that's the one to float in the spa with the chlorine tablets in. no wonder people having trouble heating there hot tubs if they follow this.
Hi Mindy,
I believe you're referring to the ChemConnect?
This does attach inside the hot tub and works in the same way as a chemical floater
Would be better with a narration instead of the music.
I am still confused about step 2, what is it sitting in, and there is not instruction between inflating the hot tub and inflating the number 2 bottom pad so how do they go together??
It’s for the top not the bottom it goes inside the cover
Good video bad music ... no need for that irratating noise .. 9 out 10... 😏
Brand new not heating up
Had on 20 hrsv
😂🎉hgty
I think I'll just have a hot bath..
Not a substitute for the printed user manual?
Really? The manual is terrible and doesn't explain anything