KTM Water Pump Shaft Seal Replacement
Вставка
- Опубліковано 29 сер 2024
- Back in the KTM workshop that used to be our garage for some more work on the 2016 350 EXC. This time we're replacing a leaking water pump shaft seal. A very easy job but don't forget some of these important tips. IMPORTANT: torque value for impeller dome nut is 6Nm. DO NOT over tighten and be sure to use thread locker.
Subscribe for more vids & tap the bell for notifications.
Tell us what you think! Leave a comment below.
Our Website: mvdbr.com
Get Merch: mvdbr.com/shop
Amazon Store: www.amazon.com...
Patreon: / mvdbr
Facebook: / mvdbrenduro
UA-cam: / mvdbr
We use & recommend:
Goldentyre Tyres: www.goldentyre...
B&B Off-Road Accessories: bboffroad.com.au
Strike Seat Covers: strikeseats.co...
Josh: 2015 KTM 500 EXC
Nat: 2016 KTM 350 EXC
Thanks mate, same issue with weeping. The previous owner has put the bloody seal in the wrong way round! Thanks for the clear video.
Brilliant!
Il y a un 2ème joint Spi derrière le 1er qui lui se trouve derrière l’hélice de la pompe à eau, donc il faut tomber le carter d'embrayage et remplacer les 2joints Spis et le roulement pour faire un travail propre sur un 350 exc-f.
Nicely done! good camera angle and description! I would feel comfortable doing this job now!
Thanks mate appreciate it :)
Hopefully the Huskies are a bit more reliable ;-)
@@MVDBR did you had coolant in your engine oil? Is that why you changed it?
@@XxXmaltaisXxX no mate it was leaking to the outside of the engine
@@MVDBR can coolant in the oil be the other seal that is faulty? The one on the oil side of the pump?
not sure why i just watch all of that , i don't even own a ktm!!!
😂 I don't know either. Maybe the monotonous sound of my voice was mesmerising 😂
keep yah broke with all the accessory them KTMs have on offer , good job
The seat was a lot cheaper than I expected which was nice :)
yeh seats are cheap , nd aftermarket fuel pumps cheap as chips , :)
Good one mate.
Cheers 👍
The size is 15x30x4,5
Did you replace the water pump gasket as well?
Can't remember for sure this was like 3 years ago but I would say probably just reused the old one 👍
Is there a possibility that the coolant also enters the crankshaft housing if the seal is leaking?
Not sure mate, maybe someone else can answer that. I'm no mechanic 😣
Unlikely but possible.
There is an oil seal on the crankcase side. There is a small space between the seals, the coolant will leak thru the weep hole.
Hi, what’s the symptoms of a failing water pump seal ?
Coolant coming out of the weep hole near the water pump, usually 👍
What year bike is this? I have a 02 520 exc. is this the same model in the video?
As per description, 2016 350 EXC 👍