I just brought mine home. It's my first Kimber. I appreciate the simplicity of the video. There was no reason to muddy up or confuse the viewer, (me) with unnecessary words. Great job!!
exactly. I get so annoyed with the UA-cam sniff that a lot of people do when explaining how to do something. they sniff after every other word lol. I guess they all have sinus issues? anyway I like a video like this. Straight to the point. without turning a 2 minute video into a 10 minute video due to excessive jaw jacking lol. thank you for the video. I can now clean my micro 9 and not leave a idiot mark haha.
Hard to tell from the video, but it looks like that is a high velocity #3 pencil. Is the pencil hollow point, jacketed hollow point, or just ball ammo?
Great re-assembly of the Kimber Micro-9, I though you had to pull the slide initially, then install the slide stop pin. You installed the slide stop first, then rack the slide to the half moon position, thanks! When I pulled the slide back, and put the slide stop pin in, the barrel would stick out of the gun…duh… your video corrected my mistake
Good video. Just purchased the 9. Take down a lot different than my Kimber 45 Ultra CDP II. The spring on the 9 can be a little bit touchy getting it in.
Plain and simple, but it's not really that easy. But, you can press the little "button/dot" on the opposite side to get the slide catch out. Just cleaned my stainless micro 9 after shooting it for the first time yesterday. Sweet little gun! I put the Hogue contoured grips and magazine end piece on it, fits my hand perfectly!
Nice I just got one a few days ago got really cheap because the frame was left somewhere and got wet and the grips are stained and the aluminum frame around the handle is pitted really bad but I got it for a throw around piece shoots like a dream I love it but does anyone know where I could get the frame refinished or chromed or something it’s too nice of a gun
Simple and to the point without any techno music in the background, I salute you my friend!
I just brought mine home. It's my first Kimber. I appreciate the simplicity of the video. There was no reason to muddy up or confuse the viewer, (me) with unnecessary words. Great job!!
Excellent video....simple, no wasted motion, disassembled and reassembled in under 2 minutes. I wish more were like this.
Finally! Thank you for a straight forward video with no need for an explanation.
exactly. I get so annoyed with the UA-cam sniff that a lot of people do when explaining how to do something. they sniff after every other word lol. I guess they all have sinus issues? anyway I like a video like this. Straight to the point. without turning a 2 minute video into a 10 minute video due to excessive jaw jacking lol. thank you for the video. I can now clean my micro 9 and not leave a idiot mark haha.
...shooting the pencil at the end was a great / funny touch!!!
6 years later .....the simplest ever instruction lol. Thank youvery much!!!
Uploader, you're the hero we need, not the one we deserve. Thank you.
Outstanding video for my new Kimber Micro 9......No music or words......sweet and to the point!! We need more like you! Thanks very much!
Love that there is no stupid music to turn down. Excellent!
..
AMEN to that...many add obnoxious, loud music....thanks..
You don't know if he was going to play the latest jams or not, like Wu-Tang Clan or something...
Perfectly done. Thumbs up for your outstanding economy of verbiage and background music. The humor of the #2 lead is a great topper.
While it might have made purists mad, a good movie-style cat scream after the pencil shot out would have been awesome.
Like the pencil trick at the end!
It's also a check to make sure the firing pin is not blocked.
It's not a trick. Budget snap cap.
Well done. Very well done. The music was perfect.
Hard to tell from the video, but it looks like that is a high velocity #3 pencil. Is the pencil hollow point, jacketed hollow point, or just ball ammo?
Great re-assembly of the Kimber Micro-9, I though you had to pull the slide initially, then install the slide stop pin. You installed the slide stop first, then rack the slide to the half moon position, thanks! When I pulled the slide back, and put the slide stop pin in, the barrel would stick out of the gun…duh… your video corrected my mistake
Awesome, simple and straight to the point. Thank you!!!
Wow. This is the best pencil gun I ever saw!
Looks like KIMBER even polishes the outside of the barrel on their KIMBER MICRO 9. Nice touch. Cool pencil trick at the 1:34 mark.
Love it.. no music .. no BS.. right to the point. excellent
Thanks for talking us through it. Sure has helped me a lot.
Great video! Thanks for not dragging out with useless talk!
If you have any questions please don't hesitate. Thanks.
Love that this is to the point. Great job
I'm having trouble with my slide stop...it's locking back every shot ...I think the rounds are hitting it on way to chamber. Any help would be great
Good video. Just purchased the 9. Take down a lot different than my Kimber 45 Ultra CDP II. The spring on the 9 can be a little bit touchy getting it in.
Bill Kulas thank you. Thanks for watching.
1:06 that moment when everybody in the room goes ahhh
thank you, I always seem to mess up the reassemble, that pin part every time.
Very straight forward.....just got mine..thanks....
Plain and simple, but it's not really that easy. But, you can press the little "button/dot" on the opposite side to get the slide catch out. Just cleaned my stainless micro 9 after shooting it for the first time yesterday. Sweet little gun! I put the Hogue contoured grips and magazine end piece on it, fits my hand perfectly!
Thanks I was having trouble reassembling, great video.
Awesome video bud. Simple and to the point.
Yes. 8 can seem to have the fi get strength to actually hold the slid back to pull it out
EXCELLENT instructional video!!!
i just bought this gun and i cant seem to get the slide lock out like you did
Well done and no life story. Just what I was looking for
Simple, informative and and to the point
I am having a very hard time getting this gun back together , seems no matter what point that I put the slide stop in the gun will not cycle
Nice I just got one a few days ago got really cheap because the frame was left somewhere and got wet and the grips are stained and the aluminum frame around the handle is pitted really bad but I got it for a throw around piece shoots like a dream I love it but does anyone know where I could get the frame refinished or chromed or something it’s too nice of a gun
I no this is a older video what did u use to push the pin out on the side sir
i used the threaded end of a .223 cleaning rod, for what it's worth.
Sometimes simpler is better, thank ya
Jeez how did you get the pin out so easily
Good video!
Who would give that a thumbs down?
My pin was a bear to get out! Got it. Lubed it before putting back. Thanks for the video.
Outstanding video! Thank you.
The extended magazine makes it easier to grip...and shoot, plus you get one extra round.
I cant wait to get mines i hate the legal age requirement
Thank you, your video is perfect.
Excellent ! Just subbed you.
I like the no bullshit 'here's how to do it' with no 'here's my UA-cam channel Hi everyone' crap. Good video.
Thanks. Looks pretty much identical to the take down/assembly of my Colt Gov't .380 I'm trading for a Micro 9.
You wont regret it. Thanks for watching.
Fantastic video, thanks.
Продаёшь?
Would you ever consider parting with it?
Kimber Micro 9 Stainless that's going to be my Kimber
Perfectly perfect!
Your hands are in the way, I can’t see what you’re doing.
I’m new and need to be able to see what exactly is being pushed or pulled…
Great job bud thank you
Thanks!
Well done!
Perfectly done.
mechanical simplicity 💰
Simply the best.
Well done
Perfect! Thanks
Good work
THANK YOU
SO SMOOTH
Perfect thank you
Thanks!!
No help can’t even lie
Nice.
W.O.W.
，
Easy peasy
it would be easier to follow if you did not out you thumb over the area your demonstrating --- maybe take a film class