Its a rule to never lube a tapered shaft, it will never tighten and will cause sheared keys. The taper needs to bite and lock the on the shaft . Oil and grease act as a spacer .
I appreciate the info. I am going to further research this. I've been anti-seizing keyed flywheels for about a decade and have never had a sheered key. I mate the tapered surfaces and torque my flywheel nut, maybe that's why. Regardless, just because I haven't had a failure doesn't mean I'm right, so I am researching this.
👍 Micheal Sabo way to go man breaking that assembly process and processing of putting those engine parts and transmission back into place as one complete unit.
Mike you need to definitely invest in a nice engine assembly stand. They rotate and hold the cases secure making it so much easier to work on. You wont be worried about holding it down keeping it from sliding around. Get one and after you use it a bit tell me where improvements can be made. I want to start building stands and selling them!
I agree with you. The reason I don't use one is because most people don't have one or don't want to buy one for just one engine build. I like to do my tutorials in a way that most people will be able to do it themselves 🤘
Hey Mike I’d like to see a full engine build video on the blaster in the future I’ve owned several and always wanted to build one too the max to see what kinda power they could make!
“Just a overall pain in the ass”. 😂 apart of the process love the videos man. The way you make these video and the time and detail and information diplayed kills everyone else doing these videos. Just amazing
I'm curious why? Unless it's a platform that has issues with sheering keys, I've always done this and never had a problem, but I understand I can still be wrong.
It's A really good recommendation for stock engine's rebuild with ported heads on them. It keeps carbon build up out of the cylinder's and cleans out the exhaust systems and pipes to.
I hope your just relaxing because of the holidays because we need continues video drops dude lol jk dude you have earned the right to relax might be a good time for you to drop the 660 engine build video for some content. Merry Christmas to you and your family and I appreciate the video.
This is a great set of videos! I am starting a Tri-Z build myself because of them. Hope it turns out as well as yours did. Who did you use to re-sleeve the cylinder?
Hey Mike I just wanna let you know that I play your videos even when I don't have time to watch. Like this morning while getting ready for work I played this vid. I truly enjoy your content and the quality craftsmanship that you put in. And merry Christmas 🎅
Dude that's a major compliment and helps me with the youtuhe algorithm. Watch time is very important, so thank you for the kind words and for taking the effort to support me by playing my videos even when you don't have the time to watch them; merry Christmas to you as well!
Bro.love your workman your vids...but you need to make some sort of holder clamp etc for these motors so there not rolling around like a basket ball always when doing these torque ups
Sorry Mike, I couldn't watch your last video. I figure if I don't see something like that, it doesn't happen. PSN's parts just magically appear. I never liked those crank-puller-inners. Seems like it would make the main bearings unhappy. Also, there's a chance of denting the crankcase surface. The old crank in the freezer/heat gun to the bearings method is my go to. I figure Yamaha, or any other manufacturer, intended those tab washers to be used, so I do as they say. I dislike plastic impellers. I REALLY dislike plastic gears. Interesting. I wondered what that large hole was above the primary gear in the RH crankcase half, as well as the pan handle area in the same spot on the clutch cover. Then it hit me like a sack of hammers. Then I did some digging. The RH crank half of the 86 Tri Z is the same part number as the 83-87 YZ250s. The RH crankcase half of the Tri Z is the same part number as the 82-83 and 85-87 YZ250s. The clutch basket of the Tri Z is the same part number as the 83, 85, and 86 YZ250s. The clutch cover gasket of the Tri Z is the same part number as the 82-87 YZ250s. What does this all mean? In theory, take an 83, 85, or 86 YZ250 primary gear, 86 Tri Z crank, matching year 82-85 YZ250 top end (I think the 84-85 might be able to use the Tri Z head, modified with a fuel pump impulse fitting the the right rear transfer port, and I'm not sure if the Tri Z intake can be used) and governor assemblies, and an 83-87 YZ250 clutch cover (to have a skilled machinist copy and modify your existing Tri Z clutch cover to use the 82-85 governor), and put them together. Bam. Exhaust valve Tri Z. Get your bottom end back and probably more top end than even the stage 2 mods. I can do more digging and looking at parts to see if this could be made to work if anyone is interested. Another good build Mike!👍
Mike thx forproduct reviews and bronze powder coat color is the shit my friend great build on tri_z not many left maybe that's a good thing pretty dangerous ride for inexperienced riders but you knocked it out of the sand box thx david s
On the honda. the transmission bearing with the seal is to let oil in on one side and blocks the other side witch throws the oil though a hole that puches it into the transmission working as an oil pump. Hope I wrote that were it makes since.
Thank you for watching my TRI-Z engine build video! All chapters are listed in the description to hop to any specific place you may want to see 🤘
This man is a sport quad legend.
Haha, thank you for saying that man 🤘
sir excellant work done engine assembling.i also have ke175 two stroke 1981 is in genuine condition .❤from rana ashfaq city sargodha pakistan.thanks
Im so happy you got the proper Japanese screwdrivers. Thats how you do things properly folks. Love you fellow Michael. 🤘😂
Love me some JIS screw drivers
Its a rule to never lube a tapered shaft, it will never tighten and will cause sheared keys. The taper needs to bite and lock the on the shaft . Oil and grease act as a spacer .
I appreciate the info. I am going to further research this. I've been anti-seizing keyed flywheels for about a decade and have never had a sheered key. I mate the tapered surfaces and torque my flywheel nut, maybe that's why. Regardless, just because I haven't had a failure doesn't mean I'm right, so I am researching this.
Curved paddles hurt my soul….😂 amazing build Mike!
They don't hook very well but they do corner nicely. Thank you for the love man!
Hell yeah brother keep em coming and def can’t wait to see an Ltz 400 build just saying lmao 🤣
Ong.
The irony of him saying to not forget the nail, but then forgets it on the Honda is funny. Love the vids man, been watching for atleast 3 years now.
Beautiful engine.
That Yamaha yellow is hard to beat. My first dose was in 1984 when I got a y zinger 50 for Christmas. It has been my favorite look for 40 years now!!
great job again lad well done keep up the good work
I love your videos but your engine videos… They slap, so good. I hope you can continue into the foreseeable future. I’ll keep watching for sure.
Means a lot, I am glad you enjoy these build videos!
Excellent video again Mike. I think this is your best most thought out tutorial yet.
Thank you for the love Matt!
👍 Micheal Sabo way to go man breaking that assembly process and processing of putting those engine parts and transmission back into place as one complete unit.
Mike you need to definitely invest in a nice engine assembly stand. They rotate and hold the cases secure making it so much easier to work on. You wont be worried about holding it down keeping it from sliding around. Get one and after you use it a bit tell me where improvements can be made. I want to start building stands and selling them!
Why not build a functioning prototype and send it to him to use and abuse first hand?!
I agree with you. The reason I don't use one is because most people don't have one or don't want to buy one for just one engine build. I like to do my tutorials in a way that most people will be able to do it themselves 🤘
I would do it the same way you do i think your a damn good builder
I appreciate that man, thank you
Ive been telling so many people here on youtube to check out your channel.
Very good work! As a 40 year bike builder, happy to have found your channel!
Thank you Sir!
wonder what you had been doing, this must have taken a lifetime to make. The definitive *80'90s s yamaha engine build, fantastic
Excellent How to Video! I've done a few and your attention to detail it top notch....Thank You!
We need some more corvette content
I pay attention to all the engine builders I have seen and I must say you're one of the best brother no doubt about it man💪🏻💪🏻💚👌🏼👌🏼🌍🇺🇲✌🏼
That's a big compliment man! Thank you
@@MichaelSabo Bigg Welcome 💚👌🏼👌🏼
Hell ya this will definitely help people out thank you
Thank you for always supporting Dave, time for you to build a TRI-Z
@MichaelSabo I could never come close to your level in a build bro props
Im about to build my furat yz125 videos are great man in depth detail cant ask for anymore !
I sure love your videos! Its nice to see someone that does the job right...nice content!
Such a sick build brother!
Would love to see a ltz250 or ltz400 build! Always an awesome job 👍
Awesome tutorial! Thank you
Thank you for watching!
Hey Mike I’d like to see a full engine build video on the blaster in the future I’ve owned several and always wanted to build one too the max to see what kinda power they could make!
Do you mean a full performance build? If you mean tutorial, I do have one here - ua-cam.com/video/raPMHjE52Z8/v-deo.html
Thank you Mr, Sabo!
“Just a overall pain in the ass”. 😂 apart of the process love the videos man. The way you make these video and the time and detail and information diplayed kills everyone else doing these videos. Just amazing
Really big compliment man, thank you
Damn brother I miss the 80’s . Rode a ATC Honda 110.👍👍😎
this is a great video. I will be using it when i go through my tri z again 😁
I'm going to come to the meet and greet next week.
Well done once again Mike. Great job. I have enjoyed this video. Thanks a lot. Keep well 😁
Glad you enjoyed it man! Thank you for watching 🤘
Would be really cool to see a hybrid build like a yfz with a yz250 motor or yz450f motor
cool video! I think your crazy for putting anti seize on the flywheel.
I'm curious why? Unless it's a platform that has issues with sheering keys, I've always done this and never had a problem, but I understand I can still be wrong.
Michael sobo I was just talking about you. Bad saying you haven't posted a video in a minute. And next say you know a video pops up
Such a old and amazing bike. Nice yellow bumble bee Mike 😂
Best performance option for a tri z is a powervalved yz 250 top end. I managed to score an 86 top end for my 86 z
Mike great content wellpresented as always keep"em 12:18 coming bro david s west coast 500ft sand dunes
the man of the people
Im right on time, you rock man🤟🏼
It's A really good recommendation for stock engine's rebuild with ported heads on them. It keeps carbon build up out of the cylinder's and cleans out the exhaust systems and pipes to.
I hope your just relaxing because of the holidays because we need continues video drops dude lol jk dude you have earned the right to relax might be a good time for you to drop the 660 engine build video for some content. Merry Christmas to you and your family and I appreciate the video.
This is a great set of videos! I am starting a Tri-Z build myself because of them. Hope it turns out as well as yours did. Who did you use to re-sleeve the cylinder?
Hey Mike I just wanna let you know that I play your videos even when I don't have time to watch. Like this morning while getting ready for work I played this vid. I truly enjoy your content and the quality craftsmanship that you put in. And merry Christmas 🎅
Dude that's a major compliment and helps me with the youtuhe algorithm. Watch time is very important, so thank you for the kind words and for taking the effort to support me by playing my videos even when you don't have the time to watch them; merry Christmas to you as well!
It's a beaut Clark!
Impact Driver for both install and Disassemble! Cheap and Very important!
Good stuff!!!!
Bro.love your workman your vids...but you need to make some sort of holder clamp etc for these motors so there not rolling around like a basket ball always when doing these torque ups
Sorry Mike, I couldn't watch your last video. I figure if I don't see something like that, it doesn't happen. PSN's parts just magically appear.
I never liked those crank-puller-inners. Seems like it would make the main bearings unhappy. Also, there's a chance of denting the crankcase surface. The old crank in the freezer/heat gun to the bearings method is my go to.
I figure Yamaha, or any other manufacturer, intended those tab washers to be used, so I do as they say.
I dislike plastic impellers. I REALLY dislike plastic gears.
Interesting. I wondered what that large hole was above the primary gear in the RH crankcase half, as well as the pan handle area in the same spot on the clutch cover. Then it hit me like a sack of hammers. Then I did some digging.
The RH crank half of the 86 Tri Z is the same part number as the 83-87 YZ250s.
The RH crankcase half of the Tri Z is the same part number as the 82-83 and 85-87 YZ250s.
The clutch basket of the Tri Z is the same part number as the 83, 85, and 86 YZ250s.
The clutch cover gasket of the Tri Z is the same part number as the 82-87 YZ250s.
What does this all mean? In theory, take an 83, 85, or 86 YZ250 primary gear, 86 Tri Z crank, matching year 82-85 YZ250 top end (I think the 84-85 might be able to use the Tri Z head, modified with a fuel pump impulse fitting the the right rear transfer port, and I'm not sure if the Tri Z intake can be used) and governor assemblies, and an 83-87 YZ250 clutch cover (to have a skilled machinist copy and modify your existing Tri Z clutch cover to use the 82-85 governor), and put them together. Bam. Exhaust valve Tri Z. Get your bottom end back and probably more top end than even the stage 2 mods. I can do more digging and looking at parts to see if this could be made to work if anyone is interested.
Another good build Mike!👍
I prefer a single carb on my banshee. Can you recommend the best carb you like.Thanks Charleston SC here
So exciting 🙌 ❤
As exciting as an engine build can be 😂
Please can you do rebuild for Yamaha DT 50 to 77 please i will love it
Mike thx forproduct reviews and bronze powder coat color is the shit my friend great build on tri_z not many left maybe that's a good thing pretty dangerous ride for inexperienced riders but you knocked it out of the sand box thx david s
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
WHAT BE IT TRAZ
Hey mike can you maybe do a honda trx450r build for the next project🙏🏼🙏🏼🙏🏼
At 1:12:00 during the ring end check swear I seen a crack in the sleeve
Mike Sabo “The Engine whisper”!!!!!!!
Have you ever had any experence with putting grease on a graphite gasket? Seems like the graphite gasket needs to be dry so they seal.
Hey boss who sleeved your cylinder??
Is it okay to use 2t oil as asembly lube for like berings
Where do you buy your bearing and seals from?
Usually Rocky Mountain ATV or ebay/amazon.
Very nice but I personally liked your “quadzilla” banshee better
Hey if my balencer gear punch holes don’t line up what happens?
YOU BETTER DO A FULL, EVERYTHING PERFECT LTZ 400
Did anyone else notice that the cylinder looked to have a large crack in it may want to go back and look at that
Whats the mustard for?
Noice, as usuall
Let’s gooooo
MR SABO WE NEED ANOTHER VET VIDEO PLZZ!!!
Hey buddy i live nearby you and i seen that you weld, could you weld an aluminum case for me? No one wants to touch it
Merry Christmas Mike From My Family To Yours.
Keep On Rockn Out Your Builds.
Dr. Quad.
I always thought the tri z 250 was the same engine as the YZ 250
Why does Michael Sabo have a Fila shoe box zip tied to the ceiling of his shop 🤔🤷🏼♂️🤣🤣🤣
1st
The cylinder look’s cracked I don’t know if it’s the video or what butt
1986 was a 6speed transmission
Sick video check out black cloud customs he does the same stuff
Michelle can you pls rebuild my bike pls I have a 1999 Kawasaki kx125 2 stroke, bring her back to life pls
Second 🦾
Crazy they can build these engines but fuck up so bad on the paper manual books. 😂.
Honestly don’t care about a 3 wheel bike want you to post something about the corvette honestly way more interesting that a stupid tri z
You need invest in a engine stand
I like to you cam lube on all internals to make sure everything is properly lubed during assembly
On the honda. the transmission bearing with the seal is to let oil in on one side and blocks the other side witch throws the oil though a hole that puches it into the transmission working as an oil pump. Hope I wrote that were it makes since.
If you have a metal lathe you can make a crank tool very easy
Or to torque any bolts you can use a tie-down strap and ratchet it down to the bench
Mike what happened to the Corvette content? Did it break your 💔 lol