Це відео не доступне.
Перепрошуємо.
TRI Z 250 Redemption: From Parts to Complete in One Epic Finale! Amazing Transformation!
Вставка
- Опубліковано 6 вер 2023
- TRI Z 250 Redemption: From Parts to Complete in One Epic Finale! Amazing Transformation!
#yamaha #2stroke #vintage
Who's ready to see this thing rip at Little Sahara!? Thank you for following the TRI-Z series; if you enjoyed it, please give the video a like and consider subscribing so you don't miss future videos like this one 🤘 You ROOOCK!!!
TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Anti-Seize -
Spreading Clamp - amzn.to/3r3vs77
Dead Blow - amzn.to/3Yvo40w
Blue Loctite - cuts2.com/gzLos
Amazon Red Threadlock - amzn.to/3KEBfXj
Milwaukee M12 Drill and Driver - amzn.to/3rCyM95
Scissor Stand -
High Temp Bearing Grease - cuts2.com/CQSIU
Torque Wrench - amzn.to/3qkGEfn
Ring Nut Wrenches - amzn.to/3Et91eD
Tusk T Handle Wrenches - cuts2.com/kSEVT
T-Square - amzn.to/3P2c1Ua
Mini C-Clamps - amzn.to/3r8MnVJ
Mini Saw Blades - amzn.to/3ZabqEM
Mini Flapper Drum - amzn.to/3Z7jVjK
M18 Sawzall - amzn.to/444ricz
Red Gasket Maker - cuts2.com/LidRR
Center Punch - amzn.to/45VulWt
Yamabond 4 - cuts2.com/pLYAr
NPT Tap Kit - amzn.to/484h1Ak
Tapping Wax - amzn.to/3ErzTLU
Orbital Sander - amzn.to/481CzO7
Zip Tie Tensioner - amzn.to/3R6eY8U
JIS Screwdrivers - amzn.to/3OQBl0A
PARTS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Exhaust Vibration Damper - ebay.us/Vlv5nP
Temperature Guage - ebay.us/pshfS9
Red Fuel Lines - amzn.to/3P6wWW8
38mm TM Carb - ebay.us/R5YKlq
Yellow Zip Ties - amzn.to/3PtyTxe
Maxima MTL Oil -
Oil Change Kit -
Front Brake Caliper (CRF150R) - ebay.us/yGPr3O
EBC Brake Pads - cuts2.com/bOgbT
Rear Brake Caliper Kit - ebay.us/tAo9WW
720 SBC Bar Clamps - cuts2.com/sRQsE
Urmosi Throttle - ebay.us/aehFty
Rear Master Cylinder Kit - ebay.us/dfrsbm
Chub Handlebars (ATV High Bend) - cuts2.com/tmKaF
Torq1 Grips - cuts2.com/TeCvI
Front Master Cylinder/Levers - ebay.us/soHN5O
Tusk Chain - cuts2.com/zUtjB
Tusk Extended Axle - cuts2.com/sAlAT
Rear Sprocket - cuts2.com/lsEEo
Front Sprocket - cuts2.com/DuQBi
Chain Slider - ebay.us/1BESKl
Maier Rear Fenders - ebay.us/BQJdda
DC Plastics - cuts2.com/wVzEx
South Texas Banshee (Wire Harness) - cuts2.com/ilwJW
Seat Cover - ebay.us/XTBV2p
Oversized Pegs - ebay.us/MDf1bc
Beadlock Rims - ebay.us/FEHIKz
Fork Conversion Kit - cuts2.com/IydGC
LED Headlights - amzn.to/42aXPww
SPONSORS/COMPANIES I TRUST
⬇️ CUSTOM TRIKES SXS, ATV'S & MORE ⬇️
BVC Offroad - bvcoffroad.com/
⬇️ OEM PARTS, PLASTICS, BEARINGS, SEALS ETC ⬇️
Rocky Mountain ATV MC - bit.ly/32OHs02
⬇️ POWDER COATING ⬇️
Bonehead Performance Coatings - boneheadperfor... (Mention my name and get 10% off)
⬇️ SUSPENSION ⬇️
Rocket Ron - www.rocketronra...
⬇️ CASE SAVERS & SKID PLATES ⬇️
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
⬇️ PREMIUM BAR CLAMPS & THROTTLES ⬇️
Urmosi - urmosi.com/
⬇️ USED PARTS & REBUILD SERVICES ⬇️
Power Sports Nation - www.powersport...
⬇️ VAPOR BLASTING & ZINC COATING ⬇️
MotoBlast - www.njvaporbla...
MERCH - michaelsabo.com/
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video.
Who's ready to see this thing rip at Little Sahara!? Thank you for following the TRI-Z series; if you enjoyed it, please give the video a like and consider subscribing so you don't miss future videos like this one 🤘 You ROOOCK!!!
Heck yeah man, you ride little Sahara? Been going there since I was a newborn
Got to watch it last night man and what a badass build. Just came back to show love and give it a like!
Front brake line is leaking at the banjo, saw 2 drips on first view of bars as u started down driveway
@@colbystewart7238 dude, you're awesome; thanks for the extra love on this one Colby!
Well done mike. That thing looks BA… Little Sahara is a couple hours south of me. I might just head down there and see that beauty in person (the tri-z, not you) ha.
One of my favorite parts of these builds is when you set all the parts in the driveway and lay next to them. I know it take forever but it’s really a cool touch, almost like unboxing a toy model that I’m about to build! Love the vids you’re awesome Mike!
Glad you like the aerial shots! Thank you for the feedback on that.
YEAH, THAT WAS SO AWESOME AND A LOT OF WORK I'M SURE. BUT IT WAS WELL WORTH IT.✌
Not a lot, but i feel like this much effort in bringing us free entertainment and knowledge deserves a tip. Absolutely killed this build, but i wasn't expecting anything else, you always kill it. Fan for life here in Ireland 🇮🇪
Wow man, this is a huge compliment and making my day. Just watching and liking the video means a lot to me. This will go right into the shop fund for future projects - thank you
Man you ROCK! This thing is amazing! You really add a lot your builds that set them apart from everyday restorations. I appreciate your dedication man.
Thank you for the love man!
This thing is killer! Totally worth the wait. The retro graphics put it over the top. Bravo dude. Also, your confidence in the sawzall kills me. I have to look away. 😂
Dude I can't overstate how much we appreciate you doing these projects and making the epic videos in such detail. Hands-down the best on UA-cam. I smashed this one in a single sitting lol.
You are the man for saying this; made my night! :)
You really should turn that into a twist throttle it's much easier to ride,It's a different ride than a Quad and it allows your thumb to keep hold of those bars!! You did a beautiful job,This was absolutely one of my favorite vehicles I've ever owned...I would leave it a little fat jetting wise with that Xtra boost port that motor is going to love it!!And when we raced we went down a couple of teeth on the rear sprocket it has no problem pulling a couple of lost teeth on that rear axle!!
@youareright5431 I appreciate the love man! I might swap out with a twist just to try it at some point 🤘
Another masterpiece!! That fog machine doesn’t get the credit it deserves 🤣🤣 Great job,Mike!!! 👍🤙
First thing I noticed. A 1985 triz 250 exploded in parts.
On the real though, the way you restore every single nut and bolt is unparalleled. I’ve never done a complete project like this but after seeing your work I couldn’t settle for less.
seriously man that's a really good resto mod !! hope you enjoy these beast. Those trikes are something else about driving feeling/performance. Again very nice job on this trike.
Props to all the time and effort you’ve put into the buisness im proud of ya🤘
Thank you for the love man!
That thing looks GREAT!! I'm looking forward to the first real rip. Well done!
This thing is an absolute work of art. Beautiful. Great work and as usual great attention to detail.
The Holy Grail video that we have been waiting for
Thank you for waiting for it man!
This guy is killing it!!! C'mon... look at the the effort my dude is putting in here, it's top notch. Love it all Mike! Don't stop grinding. I've been here since the early days and it's only gotten better. I look forward to each post. Hold on to this one, she's special.
I still have the Tri-Z 250 I grew up with. Love that you rebuilt one! I need to get mine running again.
Your Tri-z came out amazing. Looks brand new. I really miss the one I had .
Very fast and fun machines.
Great job as always.
Can’t wait to watch the whole thing I know it’s gonna turn out amazing like all your builds
Thank you Ethan!
Dude, Imagine your neighbors, looking at you laying on the ground with some random parts next to you 😂😂
Oh man ..I had a Yamaha Tri z 250…am 57yrs…back in the 1985 this was a piece of art machine the only one with cooling system…had headers and sounds awesome …ran into sand dunes near the beach…and then suddenly it was prohibited down in Puerto Rico…bought it for 2,500 in a Yamaha dealer had a model sticker built in Italy…hope one day I can have that machine back…lot of great memories…enjoy it man!
Wow! Thanks for reading my email brother. Glad you enjoyed it. 💪🏼🙌🏼😎
I’ve never flown higher, farther & landed softer than riding a private super-x style track on a badass Tri-Z. I was launching tables & landing to flat with zero concerns. that was the 1st & last experience on one & I was eleven
It really turned out sweet man, good job Michael 🔥🔥
I love your long format videos!! I’m not even into quads but I watch all your videos, they are just great, entertaining and full of precious information.
Man this is possible one of the best you've done!!! Great job!!!
Unbelievable man every build is more and more legendary. Hope you find a shifter soon this thing is unreal.
Glad you like the way it turned out! I should have the shifter sorted out in the next couple days
A shifter from a Timberwolf 250 works fairly decently. That what I have on my TriZ ✌🏻
Dude your such a master at these Sq builds thank you for all you do!!
Man that's a huge compliment Lannie 🤘🤘
I'm 50. My first trike was a 1980 YT 125 two stroke. I always wanted a yellow tri-z! YOU'RE THE MASTER at what you do.
favorite build of yours so far. really really well done. every new completed build impresses me more than the last. excellent work
Incredible build man, as always. Thanks for spending so much extra time to make our viewing experience so much better. You the man!
I know Rocket Ron has always been your go to for builds for shock rebuilds, but is that something you think you’ll ever dive into in the future? Would be cool to learn how to rebuild shocks with you.
You have to do more vintage builds
I would like to do a set of shocks on my own to learn how they work and the correct way to service them. Thank you for the kind words man!
I love every Michael Sabo build. Your attention to detail on every build is unmatched. If I was looking for someone to build me a quad or bike, I wouldn’t hesitate a bit letting you take the reins on it. 👍✌️
For real... I got an 86 Suzuki lt250r i want him to restore but I know his plate is full and I don't want to bug him..
@@joshy_h_8088enough money how could he refuse?
@theglitch99 I really want to see how the corvette gets fixed first, then I'll message him..
@@joshy_h_8088 I hear ya, good luck. Maybe your unit will be a vid in the future 😉
@@theglitch99 we can only hope
Damn man amazing job . I've had both 85 and 86 but both never looked like that . I always had problems with the kick lever shaft. Thanks man
Looks absolutely sick
I used to ride these back in the 90s
They were lethal
Here in the UK they weren't that un-common
I managed to buy my kids a tri-zinger (the kids version )
Such a blast
Hats off to you
Your are the best
YOU are the best!
No you are
The best
I sure I was just finna say that 😂💯💯
He make me real confident to start my first build but I be scared I won’t finish from frustration💯
I bleed three wheelers and I love when guys like you with such a following bring these amazing bikes to the forefront. I race a BVC 450r and sponsored by them to. I do have some suggestions and tips. The first one is the wider the back of the machine makes it more stable in turns and straights. Rear braking into a turn will straighten the bike up. If you take the front wheel down to a 10” it will open up to more tires. I run a Maxxis razor 23/10/7 for the Worcs series. The rear wheel 8”to 9” are better at finding tires. Again I love the content you created and keep up the fantastic work!
Thank you for all the tips and awesome to hear you're still rocking a trike and racing one! 🤘
Hell yea man such a sick build. Prob the only channel on youtube that i can sit an watch from start to finish. Your problem solving skills are awesome to watch the problem with the screw in end on the throttle cable nice work man keep it up we all love watching. 👏
Couldn't help but to smile when the final reveal came up. Turned out very nice. It was definitely worth the wait for this video :)
Glad you enjoyed it and thank you for waiting Fred!
Recently discovered your channel as I got my yfz450r the other day. Man your videos have been on play non stop I appreciate these lengthy step by step build videos !
Glad you found the channel and congrats on your YFZ!
Great video Mike! You really are a talented sob. Videos are always top notch. God bless brother 🇺🇸
Thank you man!
Just wow! The wait was definitely worth it!!
Unbelievable job, you really are a master at this.
Watching a Sabo assembly build is an awesome way to cap off a day of hard work. Great job on the Tri Z! I’d love to see a Yamaha Warrior restoration or resto-mod.
+1 on the warrior build idea
Awesome editing skills and it came out beautiful
Those little nit picking pieces you made and custom fitted are impressive your work is amazing keep it up man craftsmanship at its best
Once again, you hit a homerun with this build! Absolutely sick machine with bitchin graphics. Long live the 2stroke🔥🔥
It’s crazy how awesome your builds are I’ve been a fan since the 700 raptor about 5 years ago I think keep up the great work man you deserve all the greatness coming your way and the corvette is gonna be sick can’t wait for that build
Thank you for following for so long; I'm looking forward to getting after it on the Vette!
MAN, I WANTED THIS VIDEO TO KEEP GOING AND GOING, EVEN KNOW IT WAS LONG. I DIDN'T WANT IT TO END.
WHAT AN INCREDIBLE THREE WHEELER MIKE BUILT. WHAT DO YOU GUYS THINK IT'S WORTH WHEN TOTALLY DONE?
$ 10,000 I GUESS WHAT EVER SOMEONE IS WILLING TO PAY. GREAT VIDEO MIKE, LIKE ALWAYS BROTHER.
I CAN'T WAIT FOR THE NEXT ONE, TO SEE IT GO! 🏁🎌
Man I can’t get enough of your videos. Great work as always, for some reason you cursing at your build, it’s like I’m right at home. Struggle + perseverance = Mike Sabo 😂
I dreamed of riding one of these as a kid. Never even got to see one until many years later and it was in pieces. Tried buying one several years ago unsuccessfully.
That is one fine build. That looks better than new.
Yesss finallyyy
🤘🤘
I enjoyed this video very much! I appreciate all of the work and details you put into all of your builds! This tri-Z turned out completely bada$$ I love it, keep on making content like this! I had to back out and restart the video countless times because of my Wi-Fi making the tv glitch lol I was so invested in watching the entire video!
Gonna keep binge watching these. Great work.
If I could give this video two thumbs up I would. For those old enough to remember these legendary machines, this is none other then art!
Thank you for that!
Outdid yourself once again Sabo. Looks absolutely killer. Thanks again for another amazing content series. Can’t wait for the next bud. Cheers
Likes don’t give enough appreciation for these builds Mike, I look forward to seeing you restore these bikes thank you for sharing it with us!
That goes a long way Colton; thank you for the love and kind words!
I loved this build dude super interesting to see all the weird stuff that went into this build and I love the extra long video. Now I can't wait to see the 250R build with all the big $$ parts your putting on it. Going to be sick.
Insane how good this thing looks !!!!! , super job Michael , i can almost smell the 2 Stroke by just watching the video🤣
That trike turned out so amazing. I would love to see it in person. Along with all your other builds.
Great looking build! Quick tip on the NPT tap. There should be a hole in the back side of the tap with the flats. Put a chamfer tool in the drill press and press down on the tap with it. Drill press should not be on while doing this. Then turn the tap with a wrench while putting light pressure on the tap with the drill press. That will keep you centered and straight
Thank you for the tip on that!
Mike. U the man. If u can’t do it. No one can. I watched the whole video from start to finish. I didn’t wanna skip though and u not make your money from UA-cam. And it was well worth the wait!!!! Me and my kids watch u over and over and over!!! My 9yr daughter swears she’s ready to work on a 2 stroke engine 😂😂
Sweet build Mike it sounds a lot like the old 400 scramblers did!
Bro, this thing looks freaking sick! You really outdid yourself. My hat is off to you.
Thank you man!
It’s 12:10AM and I gotta be up at 5:30AM for work.. but imma watch this whole banger video.💪🏼Appreciate you Mike! 💯
Dude, you are the man; thank you!
Another nice job Mike! Super detail and love your overcoming the eventual obstacles that always show up.
Another great build, Mike!! Love your channel, especially because you don't edit out the parts that don't go right for you. Keeping it real, language and all. Love it.
I rarely sub to people on UA-cam but your knowledge is amazing and helps me expand my mechanical horizons!
Finally!!! Thank for your hard work making these videos so that I can sit on the couch scratching my belly.
Its the attention to detail that really stands out in the end.
Dude you outdid yourself again man! Looks amazing and the smoke machine us always a cool touch. Thanks for all the content I appreciate it all!
You did a damn good job on the headlight housing Mike.
Mike, killer build as usual! Love seeing all the great projects and I definitely watch the new videos as soon as I see em! Thank you for entertaining and inspiring me!
That machine looks so mint! Really good work and detail!
That is still a awesome build man! Big fan of this channel. Totally worth the wait.
I've never watched a 1.5hr video without ever skipping forward. Excellent work!
Dude, that is a major compliment; I'm happy you enjoyed it!
What a great example of history .the attention to detail is second to none, the throttle fab work shows your experience. You put on a master class of how its done
This is a really big compliment; thank you
Been watching you for awhile!! Totally loved this finale!! I love the build, and you nailed the color scheme!! Keep at it Mike \m/
Oh man, I wish I could give you 100 thumbs up, what a great job! Great great respect for the effort and attention you give to each individual part! Best regards from Germany!
Nothing better than a whole lot of new parts SWEEEEEET !!!!!👍🤘🤘🤘💪✌💛👌😁🏁
That tri z turned out killer. Sounds great and looks great. Keep up the great work.
🗣️ bout time!!! I was losing my mind waiting on a video lol you killed this build 🔥
Another top-notch build! Something I really appreciate (and completely relate to) is you don't cut out the little mishaps, like "I just had the F*cking bolt in my hand where the hell did it go??" Amazing work, excellent video, and your attention to detail is near perfection. Keep up the good work!
Awesome compliment man; thank you!
You’ve outdone yourself once again. I threw this video a like 10 seconds in. I even muted TNF to watch this video. Keep up the great work man!
You outdone yourself with this one Mike! Awesome job!!!
Mike the Tri-Z looks killer! Great job on another build.
Looks bad ass! I loved 3 wheelers when I was a kid.
Nice job, brother. I have an 85 200x, and it's a blast to ride. I hope that bad boy brings you hundreds of hours of absolute madining fun. My Man
Of the 3 bikes I've done (2 full rebuilds) I have been able to watch your videos for guidance, sometimes many times over lol, I love it that you show torque specs on major points (wishing their was more lol), I can say I have watched so many of your videos to the point they guide me on purchases, I do it for the love of it and while I can't afford many of the nice parts you use I can say the results have been far better due to your videos
12:10 you forgot to say that’s what she said! I expect more out of you Sabo😂.. on a real note we appreciate the quality of the videos this one has been long awaited!
Good catch man! 😂
That looks absolutely 💯 amazing. Best tri-z I've ever seen. Big love from the UK 🇬🇧 do not make it narrower 😢
Love the vintage builds! Look forward to seeing it rip!
Dude thank you so much! There will be videos of it ripping at the dunes! This goes right into the shop fund - thank you!
The clip @33.23 got my heart pumping 😂 keep it up
Glad you like it man!
Man dude, that thing is fucking incredible. You do some damn amazing work, and are truely talented. You deserve way over a million subs...
Means a lot to hear that; thank you man!
@MichaelSabo your certainly welcome...thanks again for responding back....appreciate that..and thanks for highlighting my comment!
Mike the build came out amazing. Look forward to more vids , maybe another tri z video . Be safe brother
Bro this is the coolest build i ever seen. Keep up the good work!! I love every minute of your videos
Big compliment man, glad you like my videos!
@michaelsabo the tri-z turned out awesome! I’m glade you stuck with the mostly oem style and didn’t venture to far from that. I enjoy watching the build series you do. Keep turning em out
I think that red is really cool and adds character. It would be neat if the axle hub was red or a red product sticker with yellow lettering too ( nothing to bold of course ), to finish out the red accent would be cool as well. Plus it would draw your eyes right to the rear red shock too. This project turned out really sweet ! If you are good with a paint stencil you could paint all the product lettering and numbers on like your carb, motor, the bottom of the front shocks etc. black. The detail would really make it pop ! Yeah another thing to make more of a pain in the behind, but in the end really awesome looking. Thanks for all the hard work Mike, not only with the builds, but with the time it takes to edit and put a videos together ! Triple BulTacos Mike !
I appreciate love Charles and I like your ideas to add another touch of custom!
I've been checking your channel daily for the last 2 months for this video 😂 I love the build man ❤❤
This thing is so sexy I started watching Debbie does Dallas! Brings those 80s vibes back!
That TRI Z is just beautiful man.
Thank you man!
Awesome build. I love your chanel. I live in pa westchester area. I have rebuilt tons of bikes. Currentyl rebuilding a 1996 rm125! My personal bike is a 2006 rmz450 but a dream of mine is a quadzilla. Thank you so much for posting these videos i love them so much. Keep it going!
This is an extremely cool build, I love originality and this thing screams just that, can’t wait to see it rip and can’t wait for the next video!