I am using Master Pro V3. I'll give you a piece of advice, I think things will work out when you do this. If you take the pedal level to the bottom, the rotation of the device will be more relaxed and the vibration will decrease during braking.ℹ️
Thanks for this vid! I'd also be interested in a list of other tires that people prefer for the MasterPro V3, so I know what to get once I wear out the stock tire
Two tires I highly recommend for master pro in general 1. Michelin City Extra: Best all rounder, it just does everything well. 2. Continental Contistreet: Best for touring, it have strong tendency to return to center, making it easier to ride long distance with.
Very informative, nice work ! I got a couple of questions regarding the master pro, as i might get one in a near futur : - Has there been records of spacers slipping out of tires ? - Have you equiped your master pro with houning's low pedal hangers ? If so, would you recommend this mod ?
@@Dedzero92 Hi, for your questions. 1. Yes there have been, however I believe all of them were because of the spacers being 3d Printed with hard materials. These spacers do need to flex inside the rim, so they should be made out of TPU, though the TPU need to be as hard as possible (95-98A shore). 2. I do not recommend lowering pedal hangers, they ruin the handling of the wheel in exchange for stability. I learned this lesson after I got into an accident where I couldn't turn quick enough because I had the lowered hangers on my MP V1.
@@Dedzero92 There is a youtuber 'YASAJTV' who made custom pedal hangers for his V1 that are even lower than the Hou Nin ones. I was pretty shocked at how low it got. You can watch him ride, and he does look a bit stiff when turning and could be more nimble. However, he prefers it that way because he gets much more feedback on the sides of his legs (i.e. maybe he feels more stable). Mounting and sitting on the wheel with lower pedals is also easier. Ultimately, I suspect it is a matter of your body height, skill, and ride style. I usually ride at 28 - 32mph and can't go that fast anyway because where I live is always windy. I don't worry about speed or brake wobbles at that speed, but I do have to make tight turns occasionally when in heavy traffic. I wasn't a fan of very low pedals but I'll try anything!
@@miked250 I assume what you are talking about is me mentioning that I can 3D print these for people who need them, and that I will not charge a lot? That is for those who don't know anyone who can print for them, or cannot print for themselves. The model file is free to download (link in description), I did gave credit to Roger for creating these spacers. Obviously I'm not going to charge for the model itself.
Hi! If you use EX30 tire spacer (google that to find the model), it will work on the RS, but it will make the tire pointy and unstable. I do not recommend it.
We owe it all to Roger 🙂
Thanks Marty. Nice to get the mention. Tep gave me credit on the file.
I am using Master Pro V3. I'll give you a piece of advice, I think things will work out when you do this. If you take the pedal level to the bottom, the rotation of the device will be more relaxed and the vibration will decrease during braking.ℹ️
Thanks for this vid! I'd also be interested in a list of other tires that people prefer for the MasterPro V3, so I know what to get once I wear out the stock tire
Two tires I highly recommend for master pro in general
1. Michelin City Extra: Best all rounder, it just does everything well.
2. Continental Contistreet: Best for touring, it have strong tendency to return to center, making it easier to ride long distance with.
Very informative, nice work !
I got a couple of questions regarding the master pro, as i might get one in a near futur :
- Has there been records of spacers slipping out of tires ?
- Have you equiped your master pro with houning's low pedal hangers ? If so, would you recommend this mod ?
@@Dedzero92 Hi, for your questions.
1. Yes there have been, however I believe all of them were because of the spacers being 3d Printed with hard materials. These spacers do need to flex inside the rim, so they should be made out of TPU, though the TPU need to be as hard as possible (95-98A shore).
2. I do not recommend lowering pedal hangers, they ruin the handling of the wheel in exchange for stability. I learned this lesson after I got into an accident where I couldn't turn quick enough because I had the lowered hangers on my MP V1.
Thanks !!! 🙏
@@Dedzero92 There is a youtuber 'YASAJTV' who made custom pedal hangers for his V1 that are even lower than the Hou Nin ones. I was pretty shocked at how low it got.
You can watch him ride, and he does look a bit stiff when turning and could be more nimble. However, he prefers it that way because he gets much more feedback on the sides of his legs (i.e. maybe he feels more stable). Mounting and sitting on the wheel with lower pedals is also easier.
Ultimately, I suspect it is a matter of your body height, skill, and ride style. I usually ride at 28 - 32mph and can't go that fast anyway because where I live is always windy. I don't worry about speed or brake wobbles at that speed, but I do have to make tight turns occasionally when in heavy traffic. I wasn't a fan of very low pedals but I'll try anything!
Will this mod work for the commander gt pro plus?
Turning sucks on the stock tire.
Nope, just change your tire to a better one.
How could you mention charging anything, Roger EUC came out with these!?
@@miked250
I assume what you are talking about is me mentioning that I can 3D print these for people who need them, and that I will not charge a lot? That is for those who don't know anyone who can print for them, or cannot print for themselves.
The model file is free to download (link in description), I did gave credit to Roger for creating these spacers. Obviously I'm not going to charge for the model itself.
😂😂, rewatch, or reread what the OP said please
@@RideEUC Apologies, you did mention not charging to print for people🤙🏾
@@miked250 No worries! My brain like to skip a few words when I speak lol, I figured it's just misunderstanding.
The 3D filament is not free.
Very nice mod Tim! Will those spacers help me avoid shaving the knobby tire on the RS? #euc_uruguay 😎🫡
Hi! If you use EX30 tire spacer (google that to find the model), it will work on the RS, but it will make the tire pointy and unstable. I do not recommend it.