Leave that as is do not touch the bear token. Configure OBS Studio: • Open OBS Studio. • Set Output Mode to Advanced: • Go to Settings > Output. • Set Output Mode to Advanced. • Configure Audio and Video Encoders: • In the Streaming tab: • Set Audio Encoder to FFmpeg OPUS. • Set Video Encoder to x264. • Set Rate Control to CBR. • Set Bitrate to 2500 Kbps. • Set Keyframe Interval to 2s. • Configure Video Settings: • Go to Settings > Video. • Set both Base (Canvas) Resolution and Output (Scaled) Resolution to 1080x1920 (for a 9:16 aspect ratio). • Set Common FPS Values to 30. • Configure Stream Settings: • Go to Settings > Stream. • Set Service to WHIP. Enable OBS WebSocket Server: • In OBS, go to Tools > WebSocket Server Settings. • Check Enable WebSocket Server. • Ensure Server Port is set to 4455. • Check Enable Authentication. • Enter a Server Password of your choice and click Apply.
very helpful video! i get everything connected, but when i go to start show, i get the error message, "WARNING! Your output settings are too high for most Whatnot users to properly load your show. Please update and apply your settings within OBS using the ranges shown in the table below, then click "Accept Settings" and i dont really know how to fix it.
Thank you for the video! Working on OBS for my whatnot for very first time and its alot to say the least! Your video helped me a ton
I’m glad I can help 💪🏻
Thank You, Please make a video about Stream Deck connect with OBS and Whatnot
liked and subbed thank you my good man 🙏 any chance you can show/know how to add the whatnot wheel?
What do we put for Bearer Token?
I need to know?
Leave that as is do not touch the bear token.
Configure OBS Studio:
• Open OBS Studio.
• Set Output Mode to Advanced:
• Go to Settings > Output.
• Set Output Mode to Advanced.
• Configure Audio and Video Encoders:
• In the Streaming tab:
• Set Audio Encoder to FFmpeg OPUS.
• Set Video Encoder to x264.
• Set Rate Control to CBR.
• Set Bitrate to 2500 Kbps.
• Set Keyframe Interval to 2s.
• Configure Video Settings:
• Go to Settings > Video.
• Set both Base (Canvas) Resolution and Output (Scaled) Resolution to 1080x1920 (for a 9:16 aspect ratio).
• Set Common FPS Values to 30.
• Configure Stream Settings:
• Go to Settings > Stream.
• Set Service to WHIP.
Enable OBS WebSocket Server:
• In OBS, go to Tools > WebSocket Server Settings.
• Check Enable WebSocket Server.
• Ensure Server Port is set to 4455.
• Check Enable Authentication.
• Enter a Server Password of your choice and click Apply.
@@Cardzflex is this different for Mac? This setup doesn’t seem to connect
very helpful video! i get everything connected, but when i go to start show, i get the error message, "WARNING! Your output settings are too high for most Whatnot users to properly load your show. Please update and apply your settings within OBS using the ranges shown in the table below, then click "Accept Settings" and i dont really know how to fix it.
yea i literally cant figure it out, i followed every step that what not told me to change for the error message and its still not working.
fr me too i did all the settings and its giving me that message too
exact same situation for me and I can't figure out how to fix it
@@BigSlabEnergy what worked for me was clicking start virtual recording on the right side
@@casperjay9623 This actually did work for me! Appreciate you
Do you by chance know how to use whatnots wheel?
show tools turned on and then it will be on the camera preview
@ awesome, thank you!
where i can find my Bearer Token?