Battery Reset || Plugged in not charging
Вставка
- Опубліковано 10 лют 2025
- Hard reset Laptop battery
This video is about how to reset laptop battery cycle count an solve the "plugged in not charging" problem in windows.
Often people are faced with the windows problem of "plugged in not charging" where the battery cannot be charged even though it is plugged in.
There are some software fixes like uninstalling the "microsoft complaint control method battery" driver in device manager and then reinstalling it by clicking 'scan for hardware changes'. But this method is not always successful.
The smart battery of a laptop has a circuit chip that keeps a cycle count ( number of times the battery has been recharged).
Some manufacturers design their battery in such a way that it cannot be charged beyond a certain number of cycles, say 600 cycles (600 times). This is just for business as you have to buy a new battery although your battery is otherwise fine.
In this video I will show how to reset the cycle count of a smart battery by reseting the circuit chip inside the smart battery.
[* check your battery cycle count : • Video ]
Great idea for good condition battery. Thanks for the guidance and appreciate your knowledge. I was able to do the same with my Lenovo X61 laptop battery (checked and condition was good) as you mentioned the IC name for short-circuiting and could locate it in the circuit board. After the work, the laptop started charging. Great guidance helped in saving money.
You are welcome 😊
@@MOHARSTUTORIALS hi good video , i just bought a new battery and right off it is flashing yellow says 78%, unplugged there is no power
Tengo una batería lenovo no carga 0%
Wow, that’s a totally different approach to solving the plugged in not charging problem by hard reset the battery, and it worked for me !! Good job man..thanks
Thank you, please share
Which battery you did
That component looks like a thermistor or just a resistor. If anything you need to somehow reset the memory IC chip. I tried this just for the heck of it with four different batteries that had 95% power and it didn't work.
It worked for me too!!! You are great! A lot of love for you!
It had been interesting to see the laptop starting without the charger connected to see how the battery pack was again powering it...but it is a useful video.
Thank you 😊
Wow great method I will try this. Recently I replaced all lithium cells but it's not changing my laptop model is Asus X552ca
Yes do try
Used your method and my battery was recovered. Thanks a lot bro.
That's a very nice way to solve plugged in not charging problem on windows..
Thanks it was a great help
I just read from the comment below says you change the battery.. i did watch it many just to see if its edited.. yes from the moment you push the power button and voila...it opens very fast and its been cut and edited.. was about to do the same thing bcoz we have the same model.. but then i'll try if it will really do.. 😅
It sounds a bit unlikely that shorting all soldering points that are close together in pairs fixes a battery pack
This worked! Thank you so much. Laptop Samsung P460
You are most welcome 😊
@@MOHARSTUTORIALS I think this method burns safety fuse and start giving output voltage. Is it correct or it resets circuit electronically???
Nice try wise guy...why didn't you keep the clip rolling? You switched the battery,cut the clip and boom!next battery...
Yes i saw it too when i read your comment was about to do the same thing .. i played it many times just to see where it was being cut.. i didnt noticed it at first😂
To not watch then??
Dislike, just.👎
Wow! this acually worked on my toshiba laptop. Thanks.
Thanks man it worked great
Awesome technique! But how do you mean by shortening the led out? By just scratching the led with the flat screw driver?
The metal tip of the screwdriver makes a convection between the two contact points and shorts them
If you don’t want to tamper with the battery’s electronic panel, you can do the same with Ms Project 2007 Demo. Just by making simple projects directly during charging, plugging it in more times, and repeating the whole process. So, if charging starts at 14%, jumping to 100% immediately, the software demo will reset the battery to charge normally. This way you don’t have to manipulate the battery, most people don’t want to.
What does team management have anything to do with charging the battery ...what is the link and explain yourself. I don't have those two terminals to short out (notice the word is not "shortening" but shorting). Also he went to the leads to the board and said they had to be shortened (sp) also....then he sticks the screwdriver on those lead terminals quickly and doesn't show what he is shortening (sp). I have a chip R0Z0 but no two terminals close by like he has.....and this board is branded Dell although the battery is 3rd party. The audio dropped down so low I could barely hear him then it comes back later....why can't these people author properly?
This is bollocks. He shorted out the temperature sensor. The green device with R005 on it is just a resistor used as a current shunt.
Can you please tell these points for dell and lenevo batteries.. please help 🙏
Hasn't worked for me yet, with a dell 8858x battery. Might be a different problem as it says doesn't recognise dell battery and refuses to charge it. I only need 10% so I can run the bios update /forceit not helping. :)
If this works, you are a huge super star genius :D
I have applied the method you teach me , thank you for helping me teacher, now the battery show plugged in and charging ,so what it means is okay no let me know teacher
Thank you it show plugged in and charging this means is okay now
So as I see you shorted the temperature sensor terminals. Is that what you are doing on the video?
Thanks a million, we will tried on old laptop.
Soundlink 2 bluetooth can not charging , so what happen ,already change new batt but still same
Wow cool thank you.do you have any social media have some questiom brother
You can question here?
Thank you very much.
Does not work with every brand plus some battery cases are ultrasonically welded so opening them destroys the case.
Could you please let me know how to short the terminal for Lenovo t520 bcoz I'm able to find the R005 ic but could not find the terminal which need to short?
Plz help me
I can't believe this still works 👍
Please help me . LG Laptop battery model LB6211BE this battery open . Where is the reset point?
Would this work on Dell laptop batterys?
Great job thanks
Is it ROO5 in all laptop batteries. If different then what it is it in dell batteries?
Is it by cleaning the lead?
How do do same with a HP 250g5 battery is showing plugged in not charging and the panel is not bringing out power ( the battery panel) what do I do
Hello I also have the same laptop and its battery have encountered an issue 2 year back that getting charged but wasn't giving the backup and now it gets resolved automatically and giving a backup of around an hour only....how to solve the quick drain issue with this problem....please help!!
Can u tell me the model of this laptop so I can purchase battery for this....
Please I have problem with my Samsung laptop same model as your, but it won't display anything on the screen. The screen will be flickering on off when you power it on, then after so seconds the display will go off completely but the backlight will still be on. How can I resolve the issue? Thank you
Hai..my battery is charging to 100 % .but giving only 30 minute backup..I checked Lion Cells in Laptop battery they are excellent then What might be the reason for Quick drain of Battery.?
My bad, I came here late. Anyways, my battery channel is showing 00v where as a the three batteries are giving 11 v all together . Is there any fault in battery or it's okay . I have 2 opened batteries, both have same problem.
We cant see what you short it? Why dont you show it with good angle????
How about the cells to test if any of them goes bad?
Sorry I don't speak English very well, I have a question, did you hard reset the temperature sensor?
Thanks the movie.
I need help with my battery, it's an HP battery an it hace the R005 chip, but i can't do the shortcut, please help me
Can I be ur student I want to learn how to fix laptop battery
In actuality you need specialised hardware (i.e. EV2300/EV2400) with software (Smart Battery Workshop or Battery EEPROM Works) to really reset a laptop battery. Specifically the BQXXXX IC that is located on the PCB board - to which the 3 pairs of 18650 cells are connected to. 😑😕😒
I have an assembled/saved playlist with videos on this topic on my channel.
The author of this video is an idiot!
Could you help me for Dell Studio 1557 battery i.e how to reset
so you saying they making waste an USA a proof of this
Same problem h same laptop battery thk kaise hoga support hi nhi kr rha b
If this method works, it's just a coincidence. How can a Sensor to measure battery temperature if Shorted will reset the Battery Controller? Where does electronic logic come from? 😀
The auhtor of this video and anyone else who would believe him is an idiot.
if common sense fails, try common no sense
mine says 0% available (plugged in) but never charges and all new hardware and everything is updated!!!😢😢😢
Same here and mine is a new battery
My laptop is the same. I tried this trick but now it showing fully charged. Before it was 25 %. Pls help me
dude can you please help me my battery cheap looks very different
BRAWOOOOOOOooooooooooooooooooooooooooo!
dude the pin you shorted is for tempreature and one more thing your battery full charge capacity is greater then the cells inside thats why it does not charge more than 27% if you laptop bms has good health you can add new cell with doing its software these pin you shorted is for temprature reading only it does not do anything you said bro!!!!!!!!!!!
Excellent
how do you do it with a Msi laptop ?
Super
Thank you
amazing thank bruh...probably not recommended; for safety reasons.
Found Roo5 chip but coundn't find the shorting point plz help
Don’t do that if you don’t know doing 😔💔💔
How try in Lenovo t410 battery?
Do this with any other RECHARGEABLE (!) battery u will risk shortening, results in -> outgassing -> results in fire or explosion, in the worst case.
Don´t do any unqualified maintenance to batteries AND do never open any! (to viewers)
Never open and NEVER EVER short circuit an accumulator, without knowing exactly what you do. Even if u do. DON´T.
This man knows what to do. FOR THIS particular Samsung Model. Don´t get urself hurt!
No offense man, nice hint anyways - but not for everyone. You should insert a disclaiming clip that says USE EXTREME CAUTION AND DO NOT OPEN ELECTRICAL PARTS. If the cells are slightly broken they need the housing, and it needs to fit tight. It will not after. Guess why there are no screws on any accu-packs.
Use extreme caution and verifiy if this is the EXACT same part and location of the contacts.
Thanks for the help, but it did not work because I did not want to damage the housing. You sure u can do this to any cellpack? I am a bit scared. I think I wrecked the circuits onboard with a power supply with too much power. :(
Device says 3,46 Amp input, but the Supply does 4,8 Amps. That would have killed it, right? :(
@@businessstartenonlinegeldv34 more Amps often don't kill the battery, just charge it faster (but put more stress on it). That's a pretty low difference, so nothing should have happened regarding that.
My laptop toshiba laptop start to show plugged in and charging
So what can I do for my laptop toshiba to change for 100% because it shows plugged in and charging but empty, how many hours it can change for teacher
Where are reset terminal in dell laptop battery bms??
Check the PCB for temperature sensor , it should be somewhere near it
@@MOHARSTUTORIALS sir, i show you a snapshot give me email
@@MOHARSTUTORIALS no any terminal near it
This diagram might help you get the idea
www.google.com/search?client=ms-android-oppo&biw=360&bih=648&tbm=isch&sa=1&q=temperature+sensor+Dell+battery+pcb&oq=temperature+sensor+Dell+battery+pcb&aqs=mobile-gws-lite..#imgrc=Y2obYeN0JB6-YM
The temperature sensor is what you need to look out for
Good one
I have 5 years old lenovo G50-80 model laptop and recently the battery ( original one, model # L12S4A02 ) stopped working. The laptop is not getting supply from battery and it's not working with battery. System shows 0 % available, plugged in. After opening the battery casing I tested all those 4 cells and all of them have 3.4volts each. So, seems cells are fine. However when I checked at battery outlet in BMS, it's showing 0 volts , no power coming at all to that point . Tried shorting the +ve terminals trick but even that failed. And, I tried to follow your trick but I could not locate it's IC shorting point in the board.
Can you please help/suggest ?
Thank you
I also have same model with same problem man
Bro, we all have the same problem. Have you ever fixed it?
will try it with acer aspire e5476g
thank you but You should have treated your cold first
Good luck
still no change but I have reset my battery
Nice
Do you know how to reset the battery of Acer 5310? Please tell me if you know, ok
I need your help for Dell
Mera nho ho rha hai Hard reset 😒
I will like nasa to have this chip on there solar cells an battery life that is connected to there air supply
i need ur help for dell battery
The process is almost similar
half of the video sound is ery less
Best solution is just buy a new battery, and it doesn't charge then you got issue on the charging port on the board, which is different issue to repair it
Hello. I have an X541SC laptop and the battery died. It lasted 2-3 hours, but I can no longer run the laptop with it. When I took it out and measured + and -, there is no voltage. I told myself it was dead. I took another second hand, but i did not measure it before taking it. I just took it and put it on the laptop, but it's the same case. When I measured it, again there is no voltage of + and -, but the batteries themselves on both sides give 11-12 volts. Does anyone have any idea if this is a dead board / battery processor, or for some reason there is a protection that has turned on and stopped the output voltage? I found this on the internet:
Some batteries are equipped with a solid-state switch that is normally in the “off” position and no voltage is present at the battery terminals. Connecting the switch terminal to ground or pulling it up often turns the battery on. If this does not work, the pack may need a code for activation. Battery manufacturers keep these proprietary codes a well-guarded secret to which even service personnel have no access.
Can be either the fuse on the battery charging board (usually a 3 or 4 pin device) or the BMS chip has entered a lockout state. What is shown here will not work on al types of battery nor will it solve all issues. The cells get fatigued over time too and will loose charging capacity as time goes on. So even while charging the total charge it can hold will be reduced. Replacing the cells is an option but it does require you to reset the BMS board.
In short, it isn't all as simple as what is shown here.
whats a BMS chip /?@@xConundrumx
I think every 🔋 battery is defrent
Nu faceti asa ceva Deja am stricat BMS
audio failed
English to dekho in angrejo ki
good いいね
FCC