Love that John has one of the world's best sharpening machines sitting in the corner and not even mentions it - like "this is our sharpening corner"...
Thanks for the positive attitude you Sam and Jordan displayed throughout the year. Always put me in a better mood when y’all guys posted a video. Cheers 🍻
12:30 it's vice or vise. Plural is vices. Since it is a single piece (with lots of gears) it should be singular ;) And speaking of langeage issues - your name is of Polish descent and thus should be read "Maletzky" or Mawetzky" (with "w" like in "whisky") since it comes from the Polish name "Małecki" (of little). In Polish your full name would be Jan Małecki (Little John like the ompanion of Robin Hood - perhaps an idea for a new series of t-shirts ;) )
You inspired me to get into woodworking and I saved up and just bought my first jobsite Sawstop yesterday. It was still in the back of my van and this morning on the way to work my van Caught fire 🔥 and burned up everything. Keep making great videos they make us feel good and laugh 😆 thank you
I love shop tours and the recap of last years projects. You should give the reasons why you laid it out like you did. My shop is laid out for sizing rough lumber. I need to work on setup for sanding and finishing.
"Woodcraft - they've got locations all over North America".... I was pumped to hear this, living in Canada, but alas, they are only in America still. No Canadian or Mexican locations....yet.
Subscribed about two weeks ago. Almost watched every video from the last two years and just found the Made for Profit podcast. More catching up to do. Great stuff!
Absolutely love what you guys have done with your shop and how creative you guys have gotten on your videos! Thanks for inspiring me to get out there and make some cool stuff
Love watching your shows. Gives me ideas and hope to have fun with working with wood. It might be well below you, but would you consider making some how to clips on using some of the basic tools? Table saw, router, sanders, things like that. I think the way you can break it down for the slower people would make for some great help.
Love the video. Just recently found the channel and it’s on consistent play in my shop. Great content. Just watched your how to make a metal and wood sign and you’ve come a long way. It was almost painful. 😂
This is a channel that I feel liking the video before it even starts is warranted! Happy New Years guys! Hope you all are staying safe! Best wishes from New Zealand.
i dont really buy stuff that youtube channels promote like t-shirts and shit like that, but you guys, John, Sam and Jordan, you guys are a really treat and as a carpenter myself i just want work with you guys. So prob gonna order a shirt "Slightly above avarge" is a favorite hope shipping isnt gonna ruin me (Sweden shipping)
Love watching the shop come together, you've come a long way from the old shop. But for the love of all that's holy, tomorrow morning when Jordan gets into the shop, hand him some WD-40, and a ton of scratch pads and save that Certiflat fab table!!!!! :)
I'd love to see you guys partner up with Lincoln and do a video with a flux/110 volt welder as an into to/DIY welding video and show maybe some budget projects that could be combined with wood similar to the brazing project.
love the channel and thank you for the signed shop rag, I am incasing it in epoxy...why? because I can! You're awesome John and here's to 2021! Cheers boys!
I have that same jet bandsaw for resawing as well, absolutely love it. Fantastic saw. I have 4 of the 3hp version of that same shaper, they are absolutely fantastic. Becareful with that shaper, its a monster. I am a professional cabinet maker.
Hey John, great vid as always with all the amazing tools! Squirrelly question for ya ......What is your workshop's ( just the wood area) square footage? Thanks bud!
Hey John I love all the energy you bring to your videos. Of course I love your squirrely ideas and creations. I do have a question though: how does one get a job of your profession?
As usual, you came, you thunk, you conquered. When are those two yinzers gonna learn that they can’t beat John “the builder” Malecki. And by the way, as a black & gold fan myself, you need to help out Big Ben on that line, my stomach hurts every time they ran a running play. Time to sharpen the cleats, it go time.
That big empty spot in your metal shop would look even better with either a water jet cutter or a bigger plasma cutter table just a little idea for you
I just built a purpleheart wood whisky glass cabinet this past weekend. Got my wood from Woodcraft. That place could make me go broke if I did more woodworking
What size is your shop? Currently designing my dream shop and not wanting to out grow it within a couple years. Your content is great and I look to you as some one I learn from.
I liked the new tour. I was curious if you have your overall building dimensions and what the woodshop, metal shop and Miss Piggy's home room dimensions are? I like the layout and trying to get a sense of the space. Thanks John!
I wish I could work there too....however I'll take that band saw next to the BBQ if you aren't using it, wouldn't have to sacrifice my hands trying to resaw on my jobsite table saw anymore lol.
Great video as always! Could you throw a strap on the granite behind Miss Piggy though. I'm worried it might fall and crush little Jordan like a grape. 🤣
I know you all started with a big drafty room and have been building stuff as you went on as I've been watching a while... and wanted to just say....drrrrrooooooollll. Keep up the fun builds.
@@raul0ca lmao! I have an old Ryobi plastic jobsite saw, some Makita cordless tools, and I just bought a 735X Dewalt Planer and Delta 6" benchtop jointer. I took the guts out of the tablesaw and built a wood tablesaw from it because it cut more crooked than a politician. I'm going to build a Biesemeyer fence for it probably next week. My issue currently is finding kiln dried lumber. The construction grade shit at my local stores is crap! I cut a 2x6 in half today and the middle of the cut separated by 4 or 5 inches!!! Literally bowed in opposite directions! Everything I got has warped beyond use at this point. If I don't find kiln dried lumber, then I won't be making anything out of wood!
@@raul0ca lol!! I just created one. Working towards licensing and website creation soon, then I'll be posting videos. Don't expect any good videos till I can get more comfortable in front of the camera and get better at editing! It will take some time.
Love the new tools and stuff in the shop but a lot of times I cannot figure out the manufacturer or what you are talking about, and there are no links. (Hard of hearing and CC is garbage still online.) Who was the aluminum air lines from?
Hey there 62 did you make GRILLED Christmas cookies? Back in early October when YOU; "Shop Chef", caused my keyboard to malfunction. I took solace in the fact that even though I drooled all over my keyboard(totally YOUR fault Shop Chef) at least come the Holiday season my favorite Squirrely Yizer would show, inform, and even instruct how to make Christmas cookies on the grill. Funny there 62 I never got the notification that yinz were makin some Christmas cookies on the grill. Now lookee here these shop tours with all these fancy tools are all well and good, but , I am a fat guy and I got awful excited about shop made food. You set me up 62 now I gots to wait til next Christmas to find out how 62 grills some Christmas Cookies. Just funnin the shop tour was tremendous, the cheeseburgers and fries were awesome, but, since I had to keep rewindin the video to keep up with yinz collage edumacated folk I definitely heard you say you were gonna grill some Christmas cookies. Thanks fer the hard work and the resipees. PS My collage edumacated wife typed up most of this here til she got tired of hearin me talk about grilled Christmas cookies. On a serious note John, Sam, and Jordan, you guys are great keep up the great work, the videos coming, and most importantly don't forget to PUNCH TODAY IN THE FACE!
What type of air system did you say you had for your shop? I am looking to update my shop with something like you have. Can you let me know what the website is ? Thanks Great shop tour too.
Awesome video man! Loved seeing your project throughout 2020. Do you like to combo planer/jointer? I'm looking at buying the same machine. Let me know!
Love it! I'm really jealous of many of those tools. None more so than the large number of early 90s safety glasses...
😆🍻
Love the shop! But where did you get the Ron Swanson (Nick Offerman) picture?!
Love that John has one of the world's best sharpening machines sitting in the corner and not even mentions it - like "this is our sharpening corner"...
I like that vintage freedom. That's right.
Take a drink everytime you hear the word "workflow" .
Thanks for the positive attitude you Sam and Jordan displayed throughout the year. Always put me in a better mood when y’all guys posted a video. Cheers 🍻
I have a Tormek too. Love it, I was tired of dull cutting tools.
The shaper table is always the one to respect.... I've had raised panel door parts just EXPLODE! Maple and Hickory, always the scariest to sendit!
12:30 it's vice or vise. Plural is vices. Since it is a single piece (with lots of gears) it should be singular ;) And speaking of langeage issues - your name is of Polish descent and thus should be read "Maletzky" or Mawetzky" (with "w" like in "whisky") since it comes from the Polish name "Małecki" (of little). In Polish your full name would be Jan Małecki (Little John like the ompanion of Robin Hood - perhaps an idea for a new series of t-shirts ;) )
The shop looks great, Looking forward to see what you make this year.
Literally missed your videos! Glad you had a good break and excited for 2021!
Ron Swanson doesn't cry, but if he did.... it would be a tear for this shop.
You inspired me to get into woodworking and I saved up and just bought my first jobsite Sawstop yesterday. It was still in the back of my van and this morning on the way to work my van Caught fire 🔥 and burned up everything. Keep making great videos they make us feel good and laugh 😆 thank you
I love shop tours and the recap of last years projects. You should give the reasons why you laid it out like you did. My shop is laid out for sizing rough lumber. I need to work on setup for sanding and finishing.
"Woodcraft - they've got locations all over North America".... I was pumped to hear this, living in Canada, but alas, they are only in America still. No Canadian or Mexican locations....yet.
Subscribed about two weeks ago. Almost watched every video from the last two years and just found the Made for Profit podcast. More catching up to do. Great stuff!
Damn, you've been busy.
Absolutely love what you guys have done with your shop and how creative you guys have gotten on your videos! Thanks for inspiring me to get out there and make some cool stuff
Love watching your shows. Gives me ideas and hope to have fun with working with wood.
It might be well below you, but would you consider making some how to clips on using some of the basic tools? Table saw, router, sanders, things like that. I think the way you can break it down for the slower people would make for some great help.
Wow ... A Cool shop filled with nice tools....You deserve it
Love the video. Just recently found the channel and it’s on consistent play in my shop. Great content. Just watched your how to make a metal and wood sign and you’ve come a long way. It was almost painful. 😂
Nice Set-up John! There's a few ideas in there that I may have to steal.... I mean borrow!
This is a channel that I feel liking the video before it even starts is warranted! Happy New Years guys! Hope you all are staying safe! Best wishes from New Zealand.
i dont really buy stuff that youtube channels promote like t-shirts and shit like that, but you guys, John, Sam and Jordan, you guys are a really treat and as a carpenter myself i just want work with you guys. So prob gonna order a shirt "Slightly above avarge" is a favorite hope shipping isnt gonna ruin me (Sweden shipping)
Love watching the shop come together, you've come a long way from the old shop. But for the love of all that's holy, tomorrow morning when Jordan gets into the shop, hand him some WD-40, and a ton of scratch pads and save that Certiflat fab table!!!!! :)
I'd love to see you guys partner up with Lincoln and do a video with a flux/110 volt welder as an into to/DIY welding video and show maybe some budget projects that could be combined with wood similar to the brazing project.
Just purchased your F2020 bundle. Your work is awesome! Keep it up.
love the channel and thank you for the signed shop rag, I am incasing it in epoxy...why? because I can! You're awesome John and here's to 2021! Cheers boys!
The walls have more advertising than a Nascar racing car. LOL!
An early congrats on 500k subs guys. The shop and new additions are looking great
Pausing you to watch Battle Bots, sorry. Another entertaining video in a wood shop. Keep them coming.
Wish I had a 10th of your shop.
Wow, this is a dream shop right here.
Sick video boys! Keep up the amazing work!
I have that same jet bandsaw for resawing as well, absolutely love it. Fantastic saw. I have 4 of the 3hp version of that same shaper, they are absolutely fantastic. Becareful with that shaper, its a monster. I am a professional cabinet maker.
Cant believe how many of these you tubers use the Festool stuff. I cannot fathom it being worth the costs.
Very impressive and every guys dream forsure...congrats and anything new sense then
I've been so inpatient for another video thank you!!!!
FYI Woodcraft is not all over North America. There is more than the USA in North America and Woodcraft only has stores in the USA.
Great additions. Can’t wait to see that industrial router table in action 👊
Jordan I knew I liked you! Ride on!
Hang on. The Squirrely Squad x Led Zeppelin shirt is just too much lmao. Love it.
If those ever go on sale...I'm buying one immediately!
A shop everyone dreams of. Nice.
Hey John, great vid as always with all the amazing tools! Squirrelly question for ya ......What is your workshop's ( just the wood area) square footage? Thanks bud!
Hey John I love all the energy you bring to your videos. Of course I love your squirrely ideas and creations. I do have a question though: how does one get a job of your profession?
As usual, you came, you thunk, you conquered. When are those two yinzers gonna learn that they can’t beat John “the builder” Malecki. And by the way, as a black & gold fan myself, you need to help out Big Ben on that line, my stomach hurts every time they ran a running play. Time to sharpen the cleats, it go time.
That big empty spot in your metal shop would look even better with either a water jet cutter or a bigger plasma cutter table just a little idea for you
Interesting seeing the 12 gauge shot shells on the bench behind the 7' workbench!! LOL Love
my trap & skeet weekends!!
spindle molders are monsters to use.
I just built a purpleheart wood whisky glass cabinet this past weekend. Got my wood from Woodcraft. That place could make me go broke if I did more woodworking
Congrats on 1/2 million subs. I know its 496k, but it’s inevitable - I’m rounding UP!
I’m impressed with this shop, this is what I eventually want to build up to. But I’m not even building anything like y’all do. 😂 one day, one day.
Yes!! So glad you finally posted a new one. Love your videos!
That's the shop setup where Tom Foolery dreams come true! Thanks for the squirrely vids John!
Building with wood and cooking meat on bbq, what more does man need! 👏🏻👍🏻🇬🇧
I’m excited to see a thorough review of the Makita slider. Also, I’ll make an offer on your Laguna so it can be put to some resaw use!
I think I drove by your shop the other day
magnificent workshop, I subscribe after seeing several videos, greetings from Spain
What size is your shop? Currently designing my dream shop and not wanting to out grow it within a couple years. Your content is great and I look to you as some one I learn from.
I liked the new tour. I was curious if you have your overall building dimensions and what the woodshop, metal shop and Miss Piggy's home room dimensions are? I like the layout and trying to get a sense of the space. Thanks John!
Liked for the awesome shop, subscribed for that beautiful Pittsburghese!
Lots of shop upgrades love it John!!!
Hey John love all your crazy videos much love! Could you please run through the correct grit progression for sanding cured resin from 120 up to 4000?
Where did you get the Ron Swanson painting? I've been searching ever since the workbench video.
You’ve really built up a pretty incredible shop! Love it!
Just seen the water bottles all sat on the floor think you need water storage 👍🏼😃
Almost at 500k!!
Vintage freedom
have you done or can you do a video on that router table, please.
I need that ron swanson art (on your tool wall behind the workbenches) in my life! where did you get it?!
I wish I could work there too....however I'll take that band saw next to the BBQ if you aren't using it, wouldn't have to sacrifice my hands trying to resaw on my jobsite table saw anymore lol.
Great video as always! Could you throw a strap on the granite behind Miss Piggy though. I'm worried it might fall and crush little Jordan like a grape. 🤣
Your shop is getting better, so is it a business ?
Where's the double cooler full of sponsored product? Or whatever you guys hydrate with? while Killin it of course.
we drink water hahahah
I know you all started with a big drafty room and have been building stuff as you went on as I've been watching a while... and wanted to just say....drrrrrooooooollll. Keep up the fun builds.
“ if you know how to English” ...... milk shooting out of my nose laughing and by milk I mean bourbon. I’ll take one of everything.
Well not everyone in US use proper English... Yaeah... New Jersey (just kidding - I am myself from off-US so you can freely laugh at my accent ;) )
Dude has more money in Festool boxes than I have in my whole shop!!!
What ya got? I've got some 10 year old blue Ryobi corded and Makita cordless
@@raul0ca lmao! I have an old Ryobi plastic jobsite saw, some Makita cordless tools, and I just bought a 735X Dewalt Planer and Delta 6" benchtop jointer.
I took the guts out of the tablesaw and built a wood tablesaw from it because it cut more crooked than a politician. I'm going to build a Biesemeyer fence for it probably next week.
My issue currently is finding kiln dried lumber. The construction grade shit at my local stores is crap! I cut a 2x6 in half today and the middle of the cut separated by 4 or 5 inches!!! Literally bowed in opposite directions! Everything I got has warped beyond use at this point.
If I don't find kiln dried lumber, then I won't be making anything out of wood!
@@charlieodom9107 Ryobi/Makita Fam!!! You need your own channel! I'll be your first subscriber.
@@raul0ca lol!! I just created one. Working towards licensing and website creation soon, then I'll be posting videos.
Don't expect any good videos till I can get more comfortable in front of the camera and get better at editing! It will take some time.
The most valuable tool in the shop: space.
Nice shop 👍👍
This is like waking up and watch the newest Pokémon episodes in the 90’s
Hey John! I don't know if you've ever shared your camera and mic equipment!! but can you make a video or link video equipment you use!!!
I had to get that T shirt.. 35 bucks well spent.
I love this guy
It has everything you need except a Basketball Hoop! 🏀
Love the new tools and stuff in the shop but a lot of times I cannot figure out the manufacturer or what you are talking about, and there are no links. (Hard of hearing and CC is garbage still online.) Who was the aluminum air lines from?
Good stuff. I always like catching up on what you have going on.
Bought your complete plans bundle. A lot of good stuff for only $60!
Hey there 62 did you make GRILLED Christmas cookies? Back in early October when YOU; "Shop Chef", caused my keyboard to malfunction. I took solace in the fact that even though I drooled all over my keyboard(totally YOUR fault Shop Chef) at least come the Holiday season my favorite Squirrely Yizer would show, inform, and even instruct how to make Christmas cookies on the grill. Funny there 62 I never got the notification that yinz were makin some Christmas cookies on the grill. Now lookee here these shop tours with all these fancy tools are all well and good, but , I am a fat guy and I got awful excited about shop made food. You set me up 62 now I gots to wait til next Christmas to find out how 62 grills some Christmas Cookies. Just funnin the shop tour was tremendous, the cheeseburgers and fries were awesome, but, since I had to keep rewindin the video to keep up with yinz collage edumacated folk I definitely heard you say you were gonna grill some Christmas cookies. Thanks fer the hard work and the resipees. PS My collage edumacated wife typed up most of this here til she got tired of hearin me talk about grilled Christmas cookies. On a serious note John, Sam, and Jordan, you guys are great keep up the great work, the videos coming, and most importantly don't forget to PUNCH TODAY IN THE FACE!
Sooooo nice. That's an amazing workshop !!!:)
That is some high quality shop tour!
You need to be a guest on Bourbon Moth’s podcast.
Like lock it up john.
What type of air system did you say you had for your shop? I am looking to update my shop with something like you have. Can you let me know what the website is ? Thanks Great shop tour too.
Any nursery builds coming up? Great shop
I have the same mitre saw. It's a beaut.
Sooo if I stop by one day do I get a shop tour and meet the crew? I'm still keeping an eye for properties around 724/412 for ya!
I love your shop. What are the dimensions
Why didn’t you go with the festool miter?
Caught a glimpse of Cart 2 D2 :( Rest in peace
Awesome video man! Loved seeing your project throughout 2020. Do you like to combo planer/jointer? I'm looking at buying the same machine. Let me know!
Challenge- do you think its possible to make a video were you say work flow more than this one
5 must have woodworking tools for a new woodworker on a budget?