Cervelo P3 Dream Bike Build! Carbon Fibre TT Bike!

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 146

  • @savagepro9060
    @savagepro9060 Рік тому +16

    MORE TT and Time Trial bikes, PLEASE!

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      Hopefully we should see more coming in as summer rolls around 🧡

  • @MattRose30000
    @MattRose30000 Рік тому +29

    this is the stuff I subscribed for!

  • @SayMcGillicuddy
    @SayMcGillicuddy Рік тому +8

    TT bikes are just awesome to look at - you've done a great job of bringing this one to A1 standard. Also - 60T chainring - quads of dooooooom

    • @Bikespeeds
      @Bikespeeds  Рік тому

      This rider has been levelling up and up their riding so he’s really at the stage he can take advantage of a bike like this. Thanks again for the support🧡

  • @waynefoster5274
    @waynefoster5274 Рік тому +2

    ohhhh I got excited when i saw a P3. I have one, and i have re-built one for a friend. A well built, high end frame - well done again guys.

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      Awesome! This one will have been up your street then. Enjoy all your work🧡⚙️

  • @sakajungle
    @sakajungle Рік тому +13

    High-end bikes are awesome! Very nice job, congrats.

  • @MxCrab
    @MxCrab Рік тому +10

    Interesting with the Rx gravel on the back, I assume you've got rough roads and that dropped chains happen with the 1x (and that a chain catcher would be tough to install if it's running that huge 60t!)

  • @matthewavignonpetersen5893
    @matthewavignonpetersen5893 Рік тому +5

    New subscriber here - stumbled onto this channel a week ago and have been binging your videos during the long hours it’s taken me to get my toddler to sleep in the middle of the night. There’s something supremely satisfying about the TLC you give these bikes and as someone who is obsessive about a spotless bike, I enjoy seeing someone with similar sensibilities. Thanks, and keep ‘em coming!

    • @SayMcGillicuddy
      @SayMcGillicuddy Рік тому +1

      TLC - that's a really good way of describing what Lee does on each bike

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Thanks very much for joining us! Glad you’re enjoying all the content and hopefully you’ll enjoy more in the future🧡⚙️

  • @BSenn11
    @BSenn11 Рік тому +1

    I’m glad you’re finally going to building bikes, I am a bike building video junkie! My favorite video!❤

    • @Bikespeeds
      @Bikespeeds  Рік тому

      It’s not a job we get often in the shop but we film as many interesting jobs as we can. Glad you enjoyed it🧡⚙️

  • @chriswoolston299
    @chriswoolston299 Рік тому +3

    Beautiful bike, hope the rider gets a PB TT next time out 👌

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      We’ve been told it’s very aero!🧡

  • @Georgi_Orehov
    @Georgi_Orehov Рік тому +1

    I watch 10+ videos from this channel and i love it feeling relaxed ❤

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Wow glad you’re enjoying the whole channel, thanks for watching!🧡

  • @yorkoxmaul66
    @yorkoxmaul66 Рік тому

    Cervelo bikes are timeless because they were the pioneers.

  • @teckendrums
    @teckendrums Рік тому +1

    he will get a lot of compliments for that bike and will have a lot of fun riding it, i know cause i have the same frame build up as a roadbike. nice video!

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      Enjoy yours! We loved the look of this one 🧡⚙️

    • @teckendrums
      @teckendrums Рік тому

      @@Bikespeedsits a realy nice build up indeed. i even had a police officer "complementing" on that bike. the black and white color will never be out of style i guess.

  • @martinspencer5148
    @martinspencer5148 Рік тому +2

    Another excellent job well done 😊what a chain ring that is 😮

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Biggest we’ve seen on a customers bike! Thanks Martin🧡⚙️

  • @joaobrito1801
    @joaobrito1801 Рік тому +1

    I really enjoy watching your work, the art of being a mechanic is beautiful! Learning from your videos is really satisfying. Thank You!

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Thanks very much for the kind comment!🧡

  • @Traildude193
    @Traildude193 Рік тому +1

    Awsome build and great job.

  • @angela-onesroman8873
    @angela-onesroman8873 Рік тому

    Very happy customer I'm sure, great job as always 👍🏽👍🏽...

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Thanks for watching Angela🧡

  • @davidlutan7727
    @davidlutan7727 Рік тому

    Awesome, hope the Customer has a great win!

    • @Bikespeeds
      @Bikespeeds  Рік тому

      We’ve been told it is significantly faster which is great to hear 🧡

  • @EMSEDUk8r
    @EMSEDUk8r 9 місяців тому +1

    Love this rebuild! 🚴🏽

  • @TheGreyGK
    @TheGreyGK Рік тому +5

    Fantastic changeover and what a bike too. 🎉 Well done 🙌

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Thanks very much for the support again and again🧡

  • @fantforever8709
    @fantforever8709 Рік тому

    Congratulations hitting 23k subs !

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Thanks very much! It’s a slow road but we’re working we hard as we can🧡

  • @paulseaman8558
    @paulseaman8558 Рік тому

    What a beast and what I like was his old bike was donor bike for the new one , lovely job 👍

    • @Bikespeeds
      @Bikespeeds  Рік тому

      We like to think some of the charm from our videos is that they’re real jobs. So the swapping over of the parts was just the best way for him! Thanks for watching🧡

  • @SuperTaylor68
    @SuperTaylor68 Рік тому +1

    Amazing job ❤

  • @petermcinnes6987
    @petermcinnes6987 Рік тому

    Learnt from this one. I'm a mountain biker, so I don't see this as anything special, but I didn't know about the tyres, and appreciated the comments on chain links ne efficiency. Really interesting.

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      Thanks Peter! We don’t see many mountain bikes in our shop as we are predominantly known to the local road bikers but we bring you as many MTB videos as we can🧡

    • @petermcinnes6987
      @petermcinnes6987 Рік тому

      All good. Your vids are really satisfying to watch. Learning bits and bobs about road bikes is a big plus.

  • @schrodingerthecat
    @schrodingerthecat 5 місяців тому +1

    Old and new tech merged into one bike.

  • @Babkyb
    @Babkyb Рік тому

    Very nice Accutron!😍

  • @chanzdad
    @chanzdad Рік тому

    Fantastic effort and make it so enjoyable to watch

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Thanks very much. We appreciate the support🧡

  • @DeanPattrick
    @DeanPattrick Рік тому +4

    What a fantastic transition over to the new frame. That 60t is a monster chain ring.! I wonder why it was paired with the arc rear mech 🤔

    • @GauGaut
      @GauGaut Рік тому +1

      This rear mech has a clutch that could help preventing chain drops that are more likely to happen on a 1x setup.

    • @DeanPattrick
      @DeanPattrick Рік тому

      @@GauGaut ah ha, so just like my GRX rear mech. Makes perfect sense, thanks.

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Yes it had all the adjustment we needed 🧡

  • @Crishuddy
    @Crishuddy Рік тому

    Beautiful machine, work of art on wheels

  • @Tom_J23
    @Tom_J23 Рік тому

    Awesome job!!

  • @stickmenkissarmy6907
    @stickmenkissarmy6907 Рік тому +1

    Fantastic....🎉🎉🎉

  • @claudioantonucci
    @claudioantonucci Рік тому

    Very nice that Accutron Sir

  • @parthadas4026
    @parthadas4026 Рік тому

    i love you watch collection !

  • @CyclingDev.
    @CyclingDev. Рік тому +1

    here we go 🤤🤤

  • @ryanhealey7987
    @ryanhealey7987 Рік тому +1

    When doing the torques at the end could you please display on screen the torque settings you are using. Great video as always. Thanks

  • @MdBoj-c7f
    @MdBoj-c7f Рік тому

    Prefect 👍💯

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Thanks very much for the support!🧡

  • @lesliekirk7036
    @lesliekirk7036 Рік тому

    Great job buddy 👍🇬🇧

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Thanks again for enjoying it🧡

  • @ykcinasak
    @ykcinasak Рік тому +1

    Another great video thanks. I would like to ask you what is the difference between double-sided tape and contact glue when you install tubular tires.

    • @the318pop
      @the318pop Рік тому +1

      Tape is easier and generally less messy (especially for the inexperienced) but glue offers a rolling resistance benefit when done well.

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      Glue is the “proper” way to do it so as a shop it’s what we offer. It is always hard and there’s no trick to it other than patience so tape isn’t a bad option for a home mechanic but glue is preferable🧡

  • @savagepro9060
    @savagepro9060 Рік тому

    The Vintage Advantage on the Rampage

  • @gregparker3526
    @gregparker3526 11 днів тому

    This service is amazing. Must cost a fortune.

  • @aryanupadhyay8320
    @aryanupadhyay8320 Рік тому

    proud to own a cervelo P3

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Enjoy it! It’s a great great bike🧡

  • @MX5Fanatic
    @MX5Fanatic Рік тому +1

    Great swap over. Interesting tips with the furniture polish and foam inserts. Geez, that chain ring is big. Did the rear derailleur have a clutch?

    • @Bikespeeds
      @Bikespeeds  Рік тому

      The derailleur did have a clutch and yes the chain ring was huge! Thanks again for watching and glad you enjoyed the details in this one 🧡

  • @krishnansrinivasan830
    @krishnansrinivasan830 Рік тому +1

    Awesome & Thanks :)

  • @the318pop
    @the318pop Рік тому

    Those conti tubs have butyl tubes, the Pro ltd versions have latex tubes and are another level if you can find them to buy.

  • @chnyuk
    @chnyuk Рік тому +2

    crazy bicycle and a cracking service as always, but how does the size of the chainring affect chainline or am i getting it wrong?

    • @zacandrijasevich4986
      @zacandrijasevich4986 Рік тому

      Because he has a larger chainring on the bike he can have the chain in the middle of the cassette, producing a straighter chain line and more efficiency where as if he had 58t before he might've been further down the cassette and losing watts.

    • @chnyuk
      @chnyuk Рік тому

      @@zacandrijasevich4986 wow that's some margins i'd say, never thought of that tbf

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Yes it is very small margins but we love to see some marginal gains🧡

  • @brian_jake
    @brian_jake Рік тому

    Yes Sir

  • @carreramann
    @carreramann Рік тому +1

    BULOVA ACCUTRON!!!!!! SEHR GUTE WAHL.

  • @menegg17
    @menegg17 10 місяців тому

    I'm impressed with your attention to detail. Beautiful build! What liquid do you use inside your ultrasonic cleaner?

  • @dagobaker
    @dagobaker Рік тому

    interested in a follow up....... with how he liked the new setup... and how his times were improved

    • @Bikespeeds
      @Bikespeeds  Рік тому

      We’ve been told it’s very fast!🧡

  • @paultomlinson528
    @paultomlinson528 Рік тому +1

    Bet that worth a few quid, monster machine

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      It looked great! Thanks for watching Paul!🧡

  • @itscliffvtr
    @itscliffvtr Рік тому

    Couldn't get my rear mech to index properly, tried everything, hanger alignment, b-screw, limit screws, etc. It Just wouldn't drop onto the smallest cog. In a last effort Iubricated the mech pivot points, boom, indexes perfectly. Thank you.

  • @philmorrow2446
    @philmorrow2446 Рік тому +1

    Just wondering where you got the holder for the syringes from?

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      We don’t even know where we got this but it isn’t the perfect answer to our problem. It has 12 holes and isn’t quite the quality we want so our plan is to grow the website and develop one for you all🧡

  • @Lahai100
    @Lahai100 Рік тому +1

    Great bikes, stellar performance👊🏻 Love your watch, what’s the brand?

    • @Bikespeeds
      @Bikespeeds  Рік тому

      This is a bulova! Thanks for watching again Lahai🧡

  • @albanclaret7330
    @albanclaret7330 26 днів тому

    I've got the same bike and I was wondering if there was a way to make the front fork more stiff, it turns left and right way too easily along with the handlebars which makes it hard to keep straight. thank you for your help. regards. alban

  • @TheJanvicgwaps
    @TheJanvicgwaps Рік тому +1

    60t chainring. Mate, thats a dinner plate 😂.

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      lol. Biggest one we’ve seen in the shop🧡

  • @shaunmarston7168
    @shaunmarston7168 Рік тому +1

    If I buy the grease kit could you give us a link on where to get holder tnanks

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Hi Shaun this stand we’ve had for years and isn’t quite right for us. Even similar ones aren’t the perfect answer so we’re hoping to generate enough money from our website to design our own. For now only the greases are available but hopefully we’ll have a stand for you in the near future 🧡

  • @mykola_kanyuk
    @mykola_kanyuk Рік тому

    Can you make a video on logic behind the torque settings, basically how much torque has to be applied to every bolt on a bike?

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      That varies so much there isn’t a one fits all answer. We’re believers in getting it exact and will research components if we dont know what they are meant to be so our advice would be to google it and get it exact rather than roughly🧡

  • @andreyrozodominguez8050
    @andreyrozodominguez8050 Рік тому

    Wow 😊

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Thanks! Glad you enjoyed it🧡⚙️

  • @nationsnumber1chump
    @nationsnumber1chump Рік тому +1

    How long does it usually take to strip down, clean and build back up?

    • @Bikespeeds
      @Bikespeeds  Рік тому

      That really depends. Every bike throws up problems. So it’s more about how long the problems take to solve. But usually for a full rebuild at least 5-6 hours and then problems on top🧡

  • @Macca-qg5cb
    @Macca-qg5cb Рік тому

    This is why i subscribed would be a bonus if you could do a weight in for general bikes, all the weight in's are the 10k+ bikes not the real world for most of us!

    • @Bikespeeds
      @Bikespeeds  Рік тому

      We say this ourselves and forgot over and over again! I’m sure you’ll hear it in one voiceover but we’ve been meaning to for two years now!🧡

  • @numeronolla1163
    @numeronolla1163 Рік тому

    Hi, loves your cleaning video a lot! Do you have any suggestions on how to clean a matte bright color frame? My frame bottom bracket area is in orange color but since it got some oil or I don't know what have been sticking there but I can't clean it at all. When I touched the surface it is smooth like other clean part of the frame so quite weird...

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Without experiencing it myself that’s very tricky to answer. Trying degreaser is the first suggestion. If you haven’t tried one we have all our cleaning products on www.bikespeeds.com that you can try and the sprays we use work wonders for us. If not the polish we use sometimes gets smears off although some people don’t like using the polish on matte we’ve never had a problem🧡

  • @lemonshire1
    @lemonshire1 Рік тому

    Nice build, but isn't that chain on the wrong way? I thought Shimano chains usually have engraving on the side that faces out

  • @kamilkurzynowski3836
    @kamilkurzynowski3836 7 місяців тому +1

    Is this a Bulova Accutron on your wrist?

  • @1972malberto
    @1972malberto Рік тому

    Awesome job well done. Do you ship stuff from your shop to Ireland.

    • @Bikespeeds
      @Bikespeeds  Рік тому +1

      Yes we do! Thanks very much for the support and we’d love to see you on the website 🧡

  • @oreocarlton3343
    @oreocarlton3343 Рік тому

    Hell have competitive advantage since he has rim brakes😉

  • @willkruisbrink4397
    @willkruisbrink4397 Рік тому

    One question about your component cleaning process: Do you need to rinse the soapy water off when you scrub off the degreaser after the ultrasonic cleaner?

  • @camilobedoya94
    @camilobedoya94 Рік тому

    how long do you let the wax cool before braking the links?

    • @Bikespeeds
      @Bikespeeds  Рік тому

      5-10 minutes till it’s solid🧡

  • @joshuabalmores2562
    @joshuabalmores2562 Рік тому +1

    I just realized the p3 has the same drop out as a track bike
    Now I’m thinking is it possible

  • @leoadventures1050
    @leoadventures1050 Рік тому

    What bb fits this frame?

  • @ilyeskahouadji3803
    @ilyeskahouadji3803 Рік тому

    I really love you content thank you so much i watch everything
    Btw i have a time trial competition tomorrow wish me luck

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Hope it went well! Glad you enjoyed the video!🧡⚙️

  • @sakajungle
    @sakajungle Рік тому

    By the way, nice website!

  • @jamesschilling9269
    @jamesschilling9269 Рік тому

    👍

  • @leslieblackburn986
    @leslieblackburn986 Рік тому +1

    Vintage TIMEX?

  • @bikepackingadventure7913
    @bikepackingadventure7913 Рік тому

    A TT bike with external cables?
    Would a aero road bike with internal cables be more aero and faster than a TT bike with external cables?🤔

    • @Bikespeeds
      @Bikespeeds  Рік тому

      Not likely. The cables will produce a lot less drag I imagine than an aero setup and riding position🧡

  • @brothatwasepic
    @brothatwasepic 7 місяців тому

    Hi guys I can't get my tubular to glue to the disc frame without small lumps cry😂😂

  • @Ditypo
    @Ditypo Рік тому

    lovely jubly