Awesome truck and genius setup! Don't worry about the heat from the ESC. It's fine when the ESC get hot, or even felt really hot. It cuts of when it is getting too hot. There is no way that the ESC burns out by getting too hot. So, as long it is not cutting of, don't worry about the temp. Motor might get hot but with the weight and the gearing a 1/5th scale fan should fix that easy. Love your truck and videos 👍 Grz from the Basherqueen!
I also think you could drop the pinion to 16/17 and have the same power but increased torque, I love the tires I’m going to try some myself thanks for sharing
Nice job. I have mostly same upgrades as you.. and wieght went up fsst!.. im still on the bench regarding cap packs.. apparently they help the esc keep cool
Yeah racing makes a twin cooling fan setup for the motor & I forget if the max 6 has a 40mm or 30mm fan if it's the 30mm yeah racing makes a real nice one & if it's 40mm search quite a few nice ones on eBay or Amazon
Funny you said that because I was thinking of getting a set. I've bought one NTF set up for the max 6, and just a cheapo Power HD twin set up for the motor. But I did buy upgraded fans for that set up too. So hopefully it will help.
@@JasonPerrinRCVlogs I’m installing the same setup in my exb with an 18 tooth pinion. I was hoping that temps would stay down as long as I didn’t hear up to high? 🤷🏼♂️
Killer looking rig and I am getting ready to install the same HW Combo in my #v4 Notorious! I am with @GreatlakeRC - I would recommend the best tire on the market , the dboots backflips instead.
try running stock wheels, i had the same wheels on my v4 notorious and it had over heating issues. as soon as i swapped the wheels back to stock, the over heating issues were gone! 👍🏻
Hey bro... Perfect vid👑 I have now stock arrma motor.on my kraton 6s v3. I want to put 1650kv.. It is more power/moment from 2050kv motor ? And..how much pinion i wil shuld to put...on 6s... Thanks
Jason, clean motor and esc install. But looks like the JBIRC chassis skips the stock esc tray? Did you mount the esc right to the chassis? The way I bash I’d be freaked of all the chassis slap damaging the esc on big hits.
Im running a 20t and looking for fan setup with traxxas heatsink most likely go for ntf setup 2 fans splittet 1300mah lipo as the ntf fans run higher amp's....you can probably run new 8s arrma fan but how long before it stops working;
Hey bud I put rpm arms on mine and since they are not as thick as the stock arms the pin that holds the bottom of the shock sticks out about 1/4 inch, how did you manage, thanks
What did you find for your best setup? I’m going to start running mamba monster x and 1650 castle combo and trying to figure out what pinion and spur to run
I jus bought that max6 ezrun esc n installed it in my shredder n I jus ran it on 4s wit the vanguard 2200kv motor n the 6s blx center diff n it looks like it’s on 6s!! I created a monster!! lol 😂!! Ima make a video n post it cuz it’s frkn bad ass now!!
That’s a beautiful Kraton! In time mine will look as nice, Slowly but surely haha ;) What is your punch level set to? I can tell it’s hard to keep all fours on the ground which I’m sure the 500k diff fluid has a lot to do with.
May I ask for the part number and place where you got those tires? I have the EXB and have a castle 1717 setup with a Futaba HOS-CB700-680oz of torque ran by Futaba 7PXR/R334 receiver
Question.. would you honestly recommend these? I'm about to pull the trigger but the lack of videos of people actually using them are almost non existent. Even on the forums Ps we are so much alike when It comes to cleaning. I spend and enjoy almost as much if not more time cleaning my rigs. I take Pride in my work lol 😆 👍
Video made me decide NOT to upgrade. So much wasted power. I have the 150a Hobbywing on a 2,050 kv motor They just wheelie ….cannot get the front end planted until well past 30 mph Nice truck Obviously tons of power
Awesome truck and genius setup! Don't worry about the heat from the ESC. It's fine when the ESC get hot, or even felt really hot. It cuts of when it is getting too hot. There is no way that the ESC burns out by getting too hot. So, as long it is not cutting of, don't worry about the temp. Motor might get hot but with the weight and the gearing a 1/5th scale fan should fix that easy.
Love your truck and videos 👍 Grz from the Basherqueen!
Great comment from the queen
I use twin NHX fans. Full aluminum and full ball bearings. They absolutely rip on 6 and 7 volts. Durable as well.
Picked up a 6s last night. Can't wait to run it!
That's a crazy fast setup you got there. Very cool 👍. Personally, for my truck, looks like WAY more than I would ever need.
WFO make some really really good fan shrouds and upgraded fans for the max ESC’s definitely will keep your temperatures down
I also think you could drop the pinion to 16/17 and have the same power but increased torque, I love the tires I’m going to try some myself thanks for sharing
Nice job. I have mostly same upgrades as you.. and wieght went up fsst!.. im still on the bench regarding cap packs.. apparently they help the esc keep cool
That thing moves 👌 what great upgrades!
Yeah racing makes a twin cooling fan setup for the motor & I forget if the max 6 has a 40mm or 30mm fan if it's the 30mm yeah racing makes a real nice one & if it's 40mm search quite a few nice ones on eBay or Amazon
Have same setup but, castle 1650kv with 20th & stock tires tho. Have a the skull skin on the bottom of M2C chassis.
👍🏻Epic looking machine. Nice bunch of upgrades👍🏻
Hey, asome car/engine! but do you think its overgeared with the 19t pinion? how hot does it get? if you drive it like in the video
Looks and preforms good man! 😃 I think if you put Backflips on instead of the Belted badlands it would help your heat issue 👍
Funny you said that because I was thinking of getting a set. I've bought one NTF set up for the max 6, and just a cheapo Power HD twin set up for the motor. But I did buy upgraded fans for that set up too. So hopefully it will help.
@@JasonPerrinRCVlogs I’m installing the same setup in my exb with an 18 tooth pinion. I was hoping that temps would stay down as long as I didn’t hear up to high? 🤷🏼♂️
Killer looking rig and I am getting ready to install the same HW Combo in my #v4 Notorious! I am with @GreatlakeRC - I would recommend the best tire on the market , the dboots backflips instead.
try running stock wheels, i had the same wheels on my v4 notorious and it had over heating issues.
as soon as i swapped the wheels back to stock, the over heating issues were gone! 👍🏻
What are your temps and top speeds with this setup? I am temptd to get the 1650kv hobbywing as well for my 6s kraton.
I really dig the wheel and tire setup. Do those balloon much? Are they any good for bashing?
Zero ballooning since they are belted. I've enjoyed them a lot.
Jason Perrin but are they any good for bashing compared to the stock ones?
Really nice job love the motor and setup and great video. But I'm wondering how the differentials are going to handle the power in time
Well when they go I'll be making a video :)
awesome dude
you got a new sub man
Hey bro...
Perfect vid👑
I have now stock arrma motor.on my kraton 6s v3. I want to put 1650kv..
It is more power/moment from 2050kv motor ?
And..how much pinion i wil shuld to put...on 6s...
Thanks
Is that HW moter the same size as the castle 1717 size moter?
The only reason i subscribed to you is because you are JP :) .... kidding, i also love your channel :) i do own a typhon 6s, love it. cheers from NZ
Game changer rc for your fans 👏
My factory stock servo says 6.0-7.4 but came set to 6.0 am I safe to run at 7.4?
Jason, clean motor and esc install. But looks like the JBIRC chassis skips the stock esc tray? Did you mount the esc right to the chassis? The way I bash I’d be freaked of all the chassis slap damaging the esc on big hits.
I have the same motor/esc. Mine feels sooo heavy on the motor side. Have you done anything to balance it out.
Would you recommend a silicone earplug running this same setup?
Im running a 20t and looking for fan setup with traxxas heatsink most likely go for ntf setup 2 fans splittet 1300mah lipo as the ntf fans run higher amp's....you can probably run new 8s arrma fan but how long before it stops working;
Hey bud I put rpm arms on mine and since they are not as thick as the stock arms the pin that holds the bottom of the shock sticks out about 1/4 inch, how did you manage, thanks
What’s a top speed looking like , mph?
What did you find for your best setup? I’m going to start running mamba monster x and 1650 castle combo and trying to figure out what pinion and spur to run
Wow that's the most jacked up Kraton I've seen! Puts my kraton exb to shame 😂
How heavy is that?
I jus bought that max6 ezrun esc n installed it in my shredder n I jus ran it on 4s wit the vanguard 2200kv motor n the 6s blx center diff n it looks like it’s on 6s!! I created a monster!! lol 😂!! Ima make a video n post it cuz it’s frkn bad ass now!!
Do you recommend the belted mx38's? I literally can't stand my non belted badlands. I wish I had gotten these.
DSC1320 yeah I do. I like running belted a lot when I just want to rip around at high speeds.
@@JasonPerrinRCVlogs the non belted are awful. And expand so much its not even fun
Game changer fans bro there awesome
Agree....what mount do I buy to fix his 40mm fan to HW1650 motor tho?
That’s a beautiful Kraton! In time mine will look as nice, Slowly but surely haha ;) What is your punch level set to? I can tell it’s hard to keep all fours on the ground which I’m sure the 500k diff fluid has a lot to do with.
Punch is set to 4. It's a lot of fun right now.
Why does thick CD oil cause the fronts to lift please🤔 and then would thinner oil help keep the front down 😎💎
I LOVE RC,I m is a indonesia
What diff fluid you running on front centre and rear?
May I ask for the part number and place where you got those tires? I have the EXB and have a castle 1717 setup with a Futaba HOS-CB700-680oz of torque ran by Futaba 7PXR/R334 receiver
They are the Proline mx38 belted Badlands.
Thank you Jason
Question.. would you honestly recommend these? I'm about to pull the trigger but the lack of videos of people actually using them are almost non existent. Even on the forums
Ps we are so much alike when It comes to cleaning. I spend and enjoy almost as much if not more time cleaning my rigs. I take Pride in my work lol 😆 👍
Arrma Kraton 6s Quite cool！！！
Facebook NTF Racing seems to be the standard for fans and heatsinks
What battle tray is that?
that’s one mean looking KrTon bro
what pinion are you running?
Esc and motor fits right in?
Yep. The motor bolts right up to the stock mount. No aftermarket mount needed.
Game changer fans are the best👍
Do you have a link? I searched them on Facebook and didn’t find anything.
He is on eBay. Do a search for gamechanger rc fans New Game Changer RC's (GCRC) EARL MOORHEAD’s FLO-MASTERS 3 Fan cooling RC
Agree....what mount do I buy to fix his 40mm fan to HW1650 motor tho?
Wheels?
Video made me decide NOT to upgrade. So much wasted power. I have the 150a Hobbywing on a 2,050 kv motor
They just wheelie ….cannot get the front end planted until well past 30 mph
Nice truck
Obviously tons of power
Good video but please why do you guys have the loud annoying music in the background? I'm not trying to be rude I just don't understand
Try 8s
Seems undrivable
Did you do anything about the heating up? ive ordered a fan and a 20T but seen others use a 20T with no fans.