Trying to Weld And This Happend! Lincoln 210MP!!
Вставка
- Опубліковано 7 вер 2024
- While working on a trailer, we had some problems with our new welder. No big deal, we'll just fix it and get back to work. Just another day on the homestead. Stay tuned for more off grid homesteading and living off the good of the land.
Check out the 210 mp here lincolnelectric...
He fertilized that "110" and it grew into a 210! "Clamping mechanism" what a funny guy. NICE when a job goes smoother then you were told.
+Larry E. Quigley Yes!!! Best comment!!! Ha! Lol;)
Buddy the cow/the bull should be “Buddy the prime rib” for that stunt.
Too funny "bull is a Miller guy"! LOL Man, I would never let him use your tool shed again!
+mdbigman Ha! No doubt! Gonna have to build him an outhouse!
im a guy whos surname is miller
You just made it look like fun to work on a welding machine. I had a good laugh at the beginning.
+John Capps Excellent cause it really wasn't that fun;)
I just bought a Lincoln Power Mig 210 mp, brought it home, plugged it in, flipped the on switch and something flashed on the screen but it wouldn't turn on! Been digging for answers online for the past 4 hours to no avail. Hopefully AirGas can help me tomorrow but I'd hate to wait weeks to have it repaired.
Cool clamping mechanism you came up with there! lol
+John Randall Ha! Thanks!;)
Not sure why a MP machine would not already have that connector from the factory…other than to sell you more parts?
The reason the hose popped is cause it should never be ran above maybe 15-16... and that’s for a big tip in a tig... MAYBE... but, for mig, 7-12 is usually the sweet spot... if your losing shield, you should use stick or flux core.... I’m not really sure the little actuator for the gas likes having 30psi on it either....
I hope that Lincoln 210 work good for you I have bad luck went through 2 already before warranty was up. Just went whith a new miller
+Antonio gonzalez Dang, good to know.
I like my ESABs. Lincoln makes a good portable stick welder but they suck at wire feed.
@@RockScreen I have an esab miniarc 161lts. Tig and stick welder and love it. Runs 6010 and 7018 smoothly even on 110v power.
Man you're just the jack of all trades. The Miller cow. Lol.
+BluegrassBushcraft Thanks Brother! NEW VID IN 10 MIN!
The clamping mechanism, genius. Very funny. Great guitar work. Keep it coming bro.
+Gareth Jones Thanks!
That's exactly what I think about my lincoln MP210 thet it's a big hunk of poop that's why I just got rid of it and got me a Miller
I've got a Power Mig 180 Dual which probably uses the same hardware for the gas system. Probably should pull it apart and see if there's a hose clamp on mine, adding one if not. Thanks for the heads up on this.
Steve
+stuff I had the same welder, never had a problem with it so its probably fine. Ran alot of wire through my 180, great welder!
Pulsing may have been bad ground, to high or loose tension or way to low wire speed. Honestly I've never been into most of these new machines. Invertec 200, dynasty or maxstar are phenomenal machines. Far as mig goes 250 amp machine or bust. Miller 252 is really nice
I love your videos. I have been looking at getting off the grid more. I bought an everlast mig, tig, stick welder. It is great to have that kind of welding flexibility when homesteading. Keep the videos coming.
I think that beef should be on the table tonite
Lots of good, useful information, Great video and presented very well! Papa Texas told me about your channel, glad he did.
+FargoFX Excallent!
I have a 210 and used it for much more than it was designed to do I hear the miller comes with a bag to put over your to help with the shame
Next time just buy a self shielded flux core spool. You can get a small 1lb for like $5
very talented guy you are!
+SunsetBay Bonnie Thank you !
The guy I work for bought a few of these 210's ...one of them has went out 3 times while working...I finally talked him into a Maxstar...you can say what you want...but unless you're a pipeliner...buy Miller
Enjoy the video like to take application. I don't like belt clamps when I use them I try to use injector clamps
nice vid. appreciate looking inside.
+ServiceTrek Thanks Brother!
I’m debating this Lincoln and the Fronius TransSteel 2200...I like Lincoln but....that fronius looks amazing
+Timber Tramp Fronius is probably the best welder made.
You made it look easy.
Yep, You can always tell a Miller dude!
Lincoln should have installed the foot control adapter from the factory, since they sell this as a TIG process machine. Getting to look inside the welder really demonstrates Lincolns sloppy craftsmanship; The fact that they didn't even put a basic hose clamp on the gas line only highlights their nickel and dime philosophy. Great video though!!
Yes this video is a lot better than your other. The audio was much better coming in both ears. And the audio in the body shop seemed fine I was able to focus on you talking and barely noticed anything that would require a different mic. It's interesting how much better and more enjoyable it is to watch a video when the audio is in both ears. Your new camera and mic increased the quality to pro. Great video and good luck on the tig I don''t think I would have the patience for tig welding.
Aaron S Thank you for the input! I also figured out how to clean up the background audio which helps alot! Now I just have to figure out the music and titles. I hope I have the patience for tig! Its so easy ro just grab the mig and run with it.
I what to say one thing I read a lot of bad reviews on the Lincoln 210 mp and came to one conclusion it’s not the machine it’s the operator welder since 1980 Lincoln all the way
Cow is on TEAM MILLER 😆
may want to try flux core wire out in the wind or flux core with shielding gas.
+j nance Flux core works great! Some of the best welds are double shielded. Gotta get me a spool.
Hahaha! Awesome video. Don't let that BS stop you!
Turn buddy into a Steer, that'll teach him.
Lincoln isn't immune to manufacturing gotchas. I've got a few Everlast welders and luckily I've never had anything go wrong with them but sometimes things work loose.
I like your style so I Subscribed great video !!
have they added the foot pedal plug in factory since this video? seems the 210 I looked at today mentioned in store to allow foot but seems silly to not just have the plug installed at factory while case is truly in pieces.
jwestpro Just bought the 210MP. Had to buy the tig kit AND pedal sicket separately. Complete BS (pun intended).
I'm a huge fan of my 210 MP but I am changing those fans out, they are ridiculously loud.
Why didn't you use dual-shield if it was that windy?
you the man🖒
ISXCUMMINS 565 DANG! Thanks Brother!
Buddy sounds like not so much of a buddy right about now... that reg is almost fully encased in kaka !
+TheCanadianBubba AH..HAH! POOP PLATED!
How do you like the Lincoln 210 vs the miller 211? Which one is more powerful? I’m trying to decide between the two. have a dedicated tig/stick so just need this for a small mig. thanks so much in advance!!!
Old comb trick. Yep holding on to this one. Preciate ya'll.
+Michael Baumgardner Anytime brother!
Nice shiner!
+Jared Davis lol, that just old guy skin!
I figured you might have gotten it while wrestling
the steer out of the trailer.
+Jared Davis Ha! He pulled a "hit and run"! Poor welder never saw it coming.
Well done! I couldn't weld to save my life. Haha
+Lone Star Living Dude, I could teach you in like 20 mins. I will be working on the sawmill some weekend in the near future. It would be a perfect time to learn!
The Good of the Land dude lets do it! I'm totally down.
+Lone Star Living Sweet! Should be ready to go in a few weeks.
Why didnt you just stick weld the trailer if you were out in the wind? For welding out in the field no?
Because stick welding is for ninnies.
Steak, it's whats for dinner tonight.
was thinking the same thing
I had a Lincoln 210MP and it was PURE JUNK. Look at the ESAB REBEL.
+Chase Saxton You are the second person to tell me they had problems with this welder. Thanks for the info.
Yep mine is nothing but problems. ESAB is the best by a long ways.
Someday I will learn to weld. Someday
+Carter Jenkins Such an easy skill to learn and so satisfying! Get to it!!!
The Good of the Land ok I have a friend that does welding. I will ask him to show me how
+Carter Jenkins Sweet! You are going to love it! A good channel to check out is welding tips and tricks.com
i need some more training in it ive done a little bit of the basics but thats it
I had major issues with the electrical board had to have the motherboard replaced 3 times I'll never buy another LinkedIn again
Where did you get the tig kit?
I’m looking for a multi process welder and am between the Lincoln and Miller machines. Since you have used bot manufacture’s machines, which would you recommend and why? Thanks
Gotta day man I’ve been watching welding videos for a while and that was the best fucking into I’ve seen lmao. Got your self a new sub
Say*
Intro* smh
+Edgar Aguilar Thanks Brother! Lots of other great vid on the channel! Enjoy!
Even new Miller that does ac/DC tig won't run 6010 so defeats purpose for me. Sooner get a diff machine or 2 separate. I understand budget for home gamers but why call a machine a do all that chokes on 6010. Need an all purpose machine that does all.
Why not just use flux core wire or stick weld if youre struggling with wind issues outside?
+jsk8drummer Both are great options. Turning up the gas a bit will work if its not to wendy or if your line doesn't pop off;)
How do you like the 210? Torn between a 211 millermatic and the 210 Lincoln. Want to set up for a spool gun. I already have a Lincoln tig welder
Works great every time. I use the magnum spool gun.
@@TheGoodoftheLand awesome thanks! Going to pick one up tomorrow
Miller boyz bit slow off the mark, thought they would be in with "just shows there is a load of BS around Lincoln products".
Blame the bull? like we all blame the dog for silent but deadly farts LOL, maybe somebody hit the local brew and some texmex spicy chow.
Love the geetar good music to work to, and your trick to fit the TIG plug.
"There was a lot of wind out there" (see, blamin the bull again :-) )
Satisying to find and fix faults-thx for sharing.
+Jaques Daniels Ha! Thanks Brother!
Hose clamp? Who'd a thought. lol On the other hand, your bull seems like hes got "True Blue" blood running through him. Hahaha. I'm just a Miller guy, don't mind me. :)
+Koality of Life Hahah! Lol! I saw your 141, I was awaiting you comment,.. DID NOT DISAPPOINT!;)
Hahaha. :)
My dad worked for Miller Electric for many years. We had several second-hand cars that were painted "Miller Blue" (with a brush, no less!).
Hey what size extension cord can be used on this welder.
We need to use a 50ft extension cord
you were too fast. please explain the part you added did you have to make a new hole for the plug and where did you get it to buy???
Why is it we always have to fix the tools before we do what we we're going to do in the first place? Only welding rig I have is Oxy-Acetylene. I know how to use some others. Just don't own one.Job I had years ago the owner asked me if I could TIG Aluminum. I said I hadn't done TIG but it could be done MIG. He said it couldn't be done. I told him by the time he bought a spool of wire and I reset the whole machine I could do it but it would be cheaper for me to take the part to my local machine shop and have them fix it while I had lunch...
What you think is better out of miller multimatic 215 or lincoln 210mp or Esab rebel EMP 215ic ?
Good job Justin. You should check out my buddy Terry over at TXViking, he is an awesome precision welder. Have a great week my friend.
+PAPA Texas Thank you! Will do!
You don’t use gas outside on a windy day! Why didn’t you use fluxcore?
great job . whos the music ?
Does that rattail comb have a Lincoln Special Tool #?
+Arkansas Pilgrim lol I believe the number is 4. Wait, no. SORRY, it's 5;)
Time for Buddy steaks
What's the part number for TIG connection?
might try using 20cfm instead of litters lpm you are at about 45 cfm
Way too much pressure
🐮 💩 on your welder 👨🏭 = 🙄
Nice welder btw and thanks for the video!!
+Portugee Prepper Ha! Thanks!
Did you ever get my email about the homestead box?
hes a miller guy:)
I'm looking at the website for the collision center you work at as I live in the Dallas area. Are you the owner? Would love to support your business if it's not too far out of the way for us.
+blake dymond Se are in Tyler tx however there is a shop in Forney. I am not the owner. JUST A TECH. Thank you dor the thought!
platinum collision in Tyler tx
+Brian Thornton yup.
now that's a shitty day
+Mr Name It really was a load of bull!;)
You think I can do it with my speedtec 215c?
What is the advantage of increasing your gas over using flux core when welding in wind please? I have seen it recommended on one welding channel to use flux outdoors. I know nothing as you can probably tell from this comment, so I’m interested in different opinions.
Flux core is flux core. It’s dirty and welds different. Turning your gas up doesn’t always work but if it does it’s still a mig weld. They use the same machine but are two different processes. Mig is way cleaner and nicer to work with but you need gas coverage.
210MP is a pretty penny to have to buy a kit that you install yourself for foot pedal capability. And it's $45.00 for a basic connector and a few wires.
No hose clamp there? Geez.
Terrible look on Lincoln's part.
Don't you have a pressure washer?
So weird that they make you install that plug yourself.
He's a Airgas customer
I think the cow is trying to tell you something hahahahhahahah
+redonefpvracing Agreed;)
The Good of the Land.. I've been welding for over 20 years.. I used the volcan 220 from harbor freight.. and it's a bad ass welder when set up rite
+redonefpvracing I was wondering if they are any good. Thanks!
The Good of the Land amazing machines just don't use the presets in the machine.. that's why a lot of people don't like the volcan, because they obviously forgot how to set a welder
+redonefpvracing It is the same on the Lincoln and the Miller. The presets seem off.
Cardboard shield is cheaper than gas
Where didja get that Blue stand??? lol
+Gary Vander Giessen Harbor freight like Ten years ago! Its time for a change.
damn unfortunate!
its odd how i happen to have the same name as a lot of stuff
+Tony Miller Ha!
Awesome welder but I’m getting the 180Dual😜
👍👍👍👍👍🏽👍👍
what welder would you recommend for a beginning?
+roni 80 The best way to learn is stick welding and you can pick up a cheap used setup on Craigslist. If you are interested in mig welding a Lincoln135 or Miller 141 are great welders.The inly concern anout buying a used mig welder would be the gun and the condition of the liner that the wire runs through on its eay from the welder to the stinger (gun). Hope that helps! Welding is awesom and can open so many creative doors. I highly recommend it.
The Good of the Land Thanks!
+roni 80 Absolutely!
So, I like my steak medium rare.
What better Lincoln 210 or miller 215
+Beto Torres Both high quality multi process machines. Either one would be a good purchase. I weld on both miller and Lincoln and prefer Lincoln but this is just a personal preference.
You can tell us why you prefer the lincoln please i need to take a desition
That was some bull sh…poop.
crap is the most accepted non curse to go with that
Omg time to make some 🥩
What a shitty situation💩💩
Steak tonite
Jon A Ha! He would be delicious!
What do you think of the new Harbor Freight "Vulcan" line and their MP? Some are saying it's a straight clone of the Lincoln.
+Ruckus_FPV Saw it for the first time yesterday. Lot of money for a knockoff and the biggest problem with HB tools is the electronics. I would orobably buy a 180 hd .
The Good of the Land
A good friend of mine has the 210MP. It's a good little machine. But speaking of electronics, his machine died in the middle of TIG welding (torch in MY hand).
Repair facility told him it couldn't be fixed because Lincoln is having parts supply issues, as they are having a lot of failures.
However, since they couldn't fix it, Lincoln sent him a brand new machine. At least they handled it.
Ruckus_FPV gun seems on cheap side
Easy-peezey when you have the right tools for the job! Growing up in Anheuser-Busch country I am sooo tired of their products. I do like Miller beer. Miller is not bitter like other beers. Miller is smooth and delicious and I'd rather drink that than ANY AB-Inbev products any day of the week. Budweiser has lost its' beechwood flavor. Budweiser, like Busch beer, is like drinking water. There is no flavor to it.
A "hose clamp"???
What sorcery of which thou speaketh of??
+Gregory Thomas Ha!
I'm laughing. Sorry.
+Greyman Happy to entertain!;)
I would say he drinks Miller by the looks of the runny poo.
that could be human
Lmao omg too funny