Vauxhall corsa non start P1616 P1615
Вставка
- Опубліковано 21 вер 2020
- Vauxhall Corsa 2005 non start P1615 P1616 codes logged, and the car wont start.
P1615 wrong vehicle id from body control module
P1616 wrong vehicle id from instument control module
This Vauxhall corsa was a cranking no start and the management asnt coming on, canbus testing and ABS module bypass followed by a BCM reset and reprogram got this poor Vauxhall Corsa running again.
A refurbished ABS pump was the repair for this vehicle, now running correctly.
Subscribe and get more great videos weekly
/ @rmautodiag
Picoscope 2 channel scope
amzn.to/2C8MeYt
Picoscope 4 channel scope
amzn.to/3gvFWRB
Uni-T multimeter
amzn.to/3bSDT7J
decade/resistance box
amzn.to/3jWds5u
amzn.to/326vrjj
rmautodiag.com
home
/ rmautodiag
Disclaimer:
Due to factors beyond the control of RMAutodiag, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. RMAutodiag assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. RMAutodiag recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RMAutodiag, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
As an Amazon associate, i earn from qualifying purchaces. - Авто та транспорт
Great thorough investigation.
Thanks for the comment
gracias por compartir tus conocimientos
felicitaciones.
muy bien explicado y muiy buen diagnostico.
saludos desde mexico
Great video thenks
Good find 👍
Thanks for the comment
Thanks 👍
Hi thx for video, but what do you do? only programming bcm?
hi mate , i get this with my corsa 1.0 none abs , its not as bad tho could it be IPC cluster / if i leave headlights on for a while then try start it just cranks , if i cycle ignition it starts up and doesnt cut out?
Was it a four digit code you entered to get the car started again ?
Thanks.
Thanks for the comment
I have a very similar problem so this is excellent information for me. I would like to follow in the footsteps of your diagnosis but I have one question: Where do you get the security code from?
It will either be on the car pass card in the owners pack. Or you will need something with key programming ability to pull the pin from the car. Thanks for your comment
@@rmautodiag Unfortunately I think I've exhausted all the diagnosis options that are available to me with no success. I scoped the CAN-H and CAN-L but in my case they were both OK. I tried resetting the BCM, but that didn't work. I can communicate with all the modules from OPCOM but the BCM claims the ECM is not present, and the ECM claims the BCM (plus a bunch of other things) are not present. It somewhat suggests that the ECM is faulty, but this would be a guess and I suppose it's not just a case of replacing it - it would have to be programmed somehow.
Anyway, once we get into the weeds of guessing I feel like I'm pretty much done.
Thanks again for the useful video.
The 10 seconds wait time that I skipped last me hour's
❤
the security code is the pin code
thanks
👍
Thanks for the comment
Hi! How much did the customer roughly pay fir this to be done? As this is exactly what is wrong with my car :) thanks!
How can I buy opcom?