Sabi viewers se request hai sir k videos like karein channel ko subscribe karein kyunki ye koi entertainment channel nahi hai jis par millions of viewers aaye Ye khaas viewers k liye hai Itni knowledge free m lene k baad kam se kam like aur subscribe to banta hai boss
very Nice technique 👏. But I like normal Engraving more. Looks more natural It shows details of the boys Tshirt and other things. Many people like dark also Maybe it's just my liking and taste.
thanks for very good information about borex, one thing, after engraving hath se touch krne se black part fail ja rha hai, aur hath me l ja rha, any post processing after engraving???
Mine copy paste only works with photo laser software, once I have connected my epilog machine. It gets activated once my machine is there. Otherwise you can give direct engraving command from photo laser. That should work. Alternately, you can send me your file to my email id, I can help you by converting that file and can email back to you in Corel file.
I have ordered this product from Amazon nd I got my product.. and engraving quality is low on wooden frame.. now should I do.. ? Can I enhance it.. is it possible
Once, the item has been engraved, the quality can not be enhnaced on the later stage. The final quality depends upon many factors including the sharpness and resolution of the original image. The machine used for producing the engraved images also plays a major role. Unfortunately, in your case, nothing can be done now. You can try contacting the seller for the replacement with the good engraving.
@@abhaychopra9427 ek to aap check kijiye ki borax ki moti layer to nahin hai wood pe. Bilkul bhi nazar nahin aani chaiye layer. Doosra, pressurized air se excess borax hata dijiye engraving se pehle aur engraving ke baad.
@@BharatArora Thanks for the prompt response sir, please confirm this is the software "EngraveLab Version 10 PhotoLaser Plus -", Second thing , in your video i can see the wording "EngraveLab Version 10 PhotoLaser Plus advance epilog" is it some additional extension for epilog leaser engraver that you have or i am looking at the wrong software?. Thanks in advance for your advice.
Sir, I purchased it through my supplier of theachine in India. He is the soul distributor of Epilog machines. The software is all same. Only it is configured for optimum use for the Epilog machines. For details, you can write an email to engrave lab.
For cutting purpose any chineese machine will work and they are very cheaper. However for propper and good photo engraving, Chinese machine will not produce good results. You can contact Mr. Jaimin Upadhyay on 9716054356 . He is the distributor for Epilog machine in India. I purchased my machine from him.
Thank you for appreciating. You can contact Mr. Jaimin Upadhyay on 9716054356 . He is the distributor for Epilog machine in India. I purchased my machine from him.
@@BharatArora sir ye jo picture engraving k liye ap ny edit ki hai wesi detailing coreldraw py nhi a rhi mai ny ap ki coreldraw wli video b follow ki old man wli pr wesi nhi hoi photo laser to paid software hai
excellent very useful sir. Thank you very much sir.
Glad that you found it useful sir.
Sar mujhe aapki video bahut acchi lag rahi hai aap bahut hi acchi tarike se samjhate Hain Kaise kam karna hai 🤗
Thank you so much dear. 🥰
Very nice Bharat Sahib. You are a great man. Salute Sir
Sir 🙏. Thank you so much for the appreciation.
Sabi viewers se request hai sir k videos like karein channel ko subscribe karein kyunki ye koi entertainment channel nahi hai jis par millions of viewers aaye
Ye khaas viewers k liye hai
Itni knowledge free m lene k baad kam se kam like aur subscribe to banta hai boss
Thank you much for your love and appreciation. Really grateful sir.
very Nice technique 👏. But I like normal Engraving more. Looks more natural It shows details of the boys Tshirt and other things.
Many people like dark also
Maybe it's just my liking and taste.
Thank you sir. Yes, it is a personal taste.
Wow interested Video
Thanks
Thanks for the information.💯💯💯
You are welcome
Sar ek video aur bnao jismein ki ham ek machine lene ka Sahi decision le paye
Sure will do that.
Thanks sir nice trick.
Nice and Informative 🙌🏻
Thank you for the appreciation. ❤️
sir small laser cutting machin kya proper chalti hai pls give machine detail
ek video black stone pe engraving karne ki banaiye
Sure. Will make it soon.
Thanks for the information.
You are welcome.
Thank you so much sir love you sir
👌👌👌👌 बहुत बढ़िया सर जी
Thank you sir.
क्या शीशा और स्टील पर भी ऐनग्रेविंग हो सकती है।
किसी भी मैटेरियल पे हो सकती है सिर्फ धातु को छोड़ कर।
Sir borax engraving wood get smear, if we use dry cloth over wood dark black smear come on cloth.
Just blow it with pressurised air. It will resolve the issue.
Which machine should I buy for starting the engraving and cutting business... Is Xtool Diod Laser good?
Please see the attached video for the details.
ua-cam.com/video/V6VByF0EUaI/v-deo.html
@bharat. What does exactly Borex powder do?? Can you Brief me technicaly?
Amazing ye cut bhi kr skti hai kya steel ko
CO2 Laser sirf non metallic cheezon pe kaam karti hai.
Very useful Sir. Can I get the software( EnraveLab) Sir please.I have the software RD works. But it is not easy for image engraving.
You can download the trial and buy it from the below link.
www.cadlink.com/product/engravelab10/
Too good
Thank you for the appreciation sir.
thanks for very good information about borex, one thing, after engraving hath se touch krne se black part fail ja rha hai, aur hath me l ja rha, any post processing after engraving???
Engraving power less kar dijiye.
How to buy wood? Is there any online website to get wood? So we can print on wood
You can check on amazon. Otherwise it is readily available with the wholesale vendors selling trophies.
Sir engravelab copy paste command not work plzz help...
Mine copy paste only works with photo laser software, once I have connected my epilog machine. It gets activated once my machine is there. Otherwise you can give direct engraving command from photo laser. That should work. Alternately, you can send me your file to my email id, I can help you by converting that file and can email back to you in Corel file.
Sir wooden plauqes kha se buy kr skte hai bulk me
You can contact your local wood seller. I get mine prepared by them with steem beech wood.
Wood kanha pe milta he... Konsa wood he sir..?
You can buy it from Amazon with the below link.
amzn.eu/d/93aKMDS
Which engraved machine you used? I mean machine name and voltage
I am using Epilog mini 30. It's a 30 watts machine and has a bed size of 12x18 inches.
@@BharatArora thank you for your patience and reply
arora ji ARC sigen kar ke ek compeny ki laser machine M2 mother bord kya us per bhi aisa result aa jayega ?
ARC pe aisa engraving ka result nahin milega.
Sir ye lazer software kaha se milega hme?
I have ordered this product from Amazon nd I got my product.. and engraving quality is low on wooden frame.. now should I do.. ?
Can I enhance it.. is it possible
Once, the item has been engraved, the quality can not be enhnaced on the later stage. The final quality depends upon many factors including the sharpness and resolution of the original image. The machine used for producing the engraved images also plays a major role. Unfortunately, in your case, nothing can be done now. You can try contacting the seller for the replacement with the good engraving.
@@BharatArora okay ...thank you for the reply
sir you are osm.... love you sir..
😍
Thank you sir. 🥰. Glad to hear that you liked the video. ❤️❤️
Sir mene ap ke batay tarek se ki engraving but sir us ka engraved ho ne ke bad fal rha h black black powder
Sir Is ka solution dijiye plz..
@@abhaychopra9427 ek to aap check kijiye ki borax ki moti layer to nahin hai wood pe. Bilkul bhi nazar nahin aani chaiye layer. Doosra, pressurized air se excess borax hata dijiye engraving se pehle aur engraving ke baad.
Oky sir ji me ye ka ke dekh ta hu
Photo engrave software kese download kere sir pls batayea
Aap niche diye link se software khareed sakte hain. Main engrave lab ka photo laser plus use kar raha hoon.
www.cadlink.com/product/engravelab10/
Thanks for uploading the video, its very interesting and informative, what is the cost of the photo leaser plus ?
Thank you for appreciating the video. I bought it for ₹45000 + Tax
@@BharatArora Sir, thanks for the prompt response and guidance, can you please share the website link for purchase. Thanks
@@ridagamingandrecording2692www.cadlink.com/product/engravelab10/
@@BharatArora Thanks for the prompt response sir, please confirm this is the software "EngraveLab Version 10 PhotoLaser Plus -", Second thing , in your video i can see the wording "EngraveLab Version 10 PhotoLaser Plus advance epilog" is it some additional extension for epilog leaser engraver that you have or i am looking at the wrong software?. Thanks in advance for your advice.
Sir, I purchased it through my supplier of theachine in India. He is the soul distributor of Epilog machines. The software is all same. Only it is configured for optimum use for the Epilog machines. For details, you can write an email to engrave lab.
Sir ise kese dawnlod ya parchesh kre
You can buy the software from engrave lab website. The software is Photo Laser Plus.
Thumbs up
sir where to get photo engrave lab v9 software ?
@@hmanohar7634 www.cadlink.com/product/engravelab10/
Which type of wood ????😊
steam beech wood
Sir ye software kaise milenge
You can download the trial and buy it from the below link.
www.cadlink.com/product/engravelab10/
Hi sir I want to start same business ' can you please suggest me engraving machine for a startup not very experienced ' only photo engraving purposes
For cutting purpose any chineese machine will work and they are very cheaper. However for propper and good photo engraving, Chinese machine will not produce good results. You can contact Mr. Jaimin Upadhyay on 9716054356 . He is the distributor for Epilog machine in India. I purchased my machine from him.
How to download this software free
Borax aur boric powder same hai kya
Both are little different. I have not tried boric acid.
How to download software, please share link sir
You can try and buy from company's website with the attached link.
www.cadlink.com/product/engravelab-version-10-photolaser-plus/
how to get this softwear
Sir, you can try and buy from company's website with the attached link.
www.cadlink.com/product/engravelab-version-10-photolaser-plus/
Rudia software pr kesy ho gi
This has nothing to do with Ruida software. It's the technique of treating the wood.
@@BharatArora mei machines ruduia control hain so Kesy kry
Aap exactly kya poochna chahte hain. Kya aap dark engraving ke baare mein pooch rahe hain?
@@BharatArora g ha picture angrave krni hy
@@mister_beast_f_1 picture engrave karne ke liye, app neeche Diya link follow Karen. Ruidia controller, sirf command dega machine ko. File aapko doosre software mein jaise photoshop aurbcorel mein tayar karni hogi. Main Engrave lab the photo laser plus use karta hoon.
ua-cam.com/video/6X48s1IgfIk/v-deo.html
Machine price
Sir. I got my Product which very light one..
what should I do now..? Plz tell me..
I am sorry, i didn't get you. Please explain.
I have ordered this product from Amazon..nd I got my product
Nd the product engraved quality is low.. what should I do now..?
@@BharatArora please tell me now .
Hello sir
Hello, how can I help you?
Can i order the machine from you sir???
Sir, I do not sell machines.
engrave lab ka price kitna aata hain
You can check it on their website. I purchased it with the machine and it costed me around Rs. 45000 + Taxes.
@@BharatArora ok and thankyou for reply me ..
@@BharatArora whare to bye this machine any no. ?
You can contact Mr. Jaimin Upadhyay on 9716054356 . He is the distributor for Epilog machine in India. I purchased my machine from him.
Where can we buy this machine
Thank you for appreciating.
You can contact Mr. Jaimin Upadhyay on 9716054356 . He is the distributor for Epilog machine in India. I purchased my machine from him.
@@BharatArora thank you so much for your reply.
Sir ye photo kesy edit ki hai ap ny
I am sorry, main samjha nahin
@@BharatArora sir ye jo picture engraving k liye ap ny edit ki hai wesi detailing coreldraw py nhi a rhi mai ny ap ki coreldraw wli video b follow ki old man wli pr wesi nhi hoi photo laser to paid software hai
@@hadiasworld08 aap photoshop mein pehle ache se contrast kijiye photo ko. Pehle b&w kijiye uske baad ache se contrast karke coreldraw mein laaiye. Aap mujhe sample photo mail kar sake Hain. Testting ke liye main laser ke software mein file convert krake aapko bhej sakta hoon.
@@BharatArora bhot shukriya sir❤
@@BharatArora sir apko mail kesy krni hai?
Muje new machine buy karni hai ye kitne ki hai
Please note that I do not sell machines.
👌❤️
Thank you
software ka price kitna hai india me ?
I bought it from epilog distributor for around ₹50000
aap product sale karte ho?
No sir.
Sir I need to call you can I have your phone number
I have a co2laser but not in profitable condition can you help
Machine price