🔥 xTool Black Friday Sales & Cyber Monday Sales (ends on Nov 30th PT) 👉 xTool S1 NEW Diode Laser US Store: bit.ly/48RUUO9 ($200 off $2299, CODE: XTCUT200) UK Store: bit.ly/46UVSqV EU Store: bit.ly/46k7VNE I recommend THIS updated 20W xTool Laser Bundle 👇 US: bit.ly/20WBundle UK: bit.ly/xTool-20W-UK EU: bit.ly/xTool-20W-EU 👉 xTool F1 US Store: bit.ly/3uaPs8Y ($150 off $1699, CODE: XTCUT150) UK Store: bit.ly/47BxA5O EU Store: bit.ly/46k7VNE 👉 xTool P2: US Store: bit.ly/47m6H6c ($250 off $2999, CODE: XTCUT250) UK Store: bit.ly/3FY9Woh EU Store: bit.ly/3R2dtZ1
What a great video with a positive message. I’ve just bought an xTool D1 pro and thought what the heck I’ll get all the accessories! Just working it out now. I must admit, as a total fresher there’s a lot of trial and error required. So appreciate these kinds of instructional and ideas videos.
I am new to this product and found it exceptionally helpful. I've watched others re: set up of the new unit including the build and you are heads above the rest. You said it's a long video, I find it to be the most informative and I appreciate you covering all the bases.
Thank you thank you thank you Matt!!! I have been waiting for this video for two months since I receive my XTool D1 and F1. My software was part of the demo stage and they have definitely upgraded it. I greatly appreciate your video and now I feel more confident. Thank you very much.
It's a cool gadget and I wouldnt mind it but its things like this that takes out the soul of working with wood - I like when things aren't 100% prefet, when things arent looking the same, when someone put a lot of work and love in it
Use masking tape over anything you want to test run. You will have to lower your speed and power but once you get it dialed in just to mark it and not cut through, it works perfectly. I use blue masking tape because the marking turns out better.
Instead of using paint thinner (which is chemically designed to thin oil based paints), you should be using acetone for spray paints where they are ether based. Plus, you wash off the waste into a plastic or metal container, not down your drain where it will pollute your water system (either town water or your water table if you have a leach field).
to piggyback off this, actually just check with your water authority for drainwater if you have city sewage. Many things actually CAN be drained down your normal city sewage (like antifreeze in most places, holy smokes) but never your leach field (like antifreeze, holy smokes)
Instead of using a masking paint that requires thinner or acetone to remove try using water washable tempera paint. Some people brush it on but I invested less than $100 on a Harbor Freight airbrush compressor/air brush set. Apply the tempera paint, let it dry, engrave your image and wash it off with water. That simple!
It’s always great to see a fellow creative champion & encourage others to make their mark! Maybe a small pun intended, lol…FANTASTIC videos & now I completely want one! Btw, by any chance do you have a separate photography channel?
Wow great video, unfortunately I already bought it so I could not use the link but once I am ready for the additions I will. Thank you for the work yo've done.
Matt I also have a question about how to get my business started with the XTool laser. Any ideas? And how did you know that the hammer that you engraved would sell for about $40?
Thanks for your video, I'm thinking about get one of this laser machine. Could you tell me why did you paint the mason jar and them took the paint off?
Can this cut a few millimetres deep into Lino? Specifically lino used for Lino prints? Shopping for a machine that can and would love to know if this has been tested with Lino.
Can I ask where you got the mason jar from? I've been trying to find round jars but all I can find is the jars with beveled edges (more like an octagon shape)
That is the PSI woodworking brand on Amazon. They stay sold out a lot!
2 роки тому
What is the difference between the default blue laser and the xTool 21064nm infra red laser? They quote that the infra red laser is used to engrave metals and similar materials. But you can do that with the blue one too. Does it just work a lot better?
Not this unit unless you get an IR module. I would consider the xTool F1. You will a video of it on my channel. (Only fiber and infrared lasers will mark & etch metal)
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre-establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
That is an option that you can toggle on. When you select “cut” the laser module kicks into a high powered mode and gives you options for different materials.
Great video and explanations. I have a graphic and 3d design background and am really thinking of getting this to complement my 3d printing. Thanks for the video
Does anyone have or know where to get a chart for XTool 10watt Cutter, that shows basic power and speed settings. I'm burning up a lot of material trying to find just the right settings. If you have one can you put a link so us beginners have a plase to start
Juast got my D1 20 watt. Question. Can I adjust the thickness of the etching or am I limited to the width of the laser. I would like my outline of an item to be a little thicker.
If I’m understanding correctly, what you are describing would depend on how thick the lines are on the file you are trying to engrave. If you would like thicker lines, you may need to find a similar file someone made that looks thicker.
Thank you for this video... I have the f1 and when I upload an image (trying to do a soundwave) it keeps asking for DPI and its a very smudgey result... do you have any recommendations?? Thank you!! Doing this on stainless steel bracelet.
Is the image you dowloaded a high resolution? If you downloaded a low resolution photo, the F1 is trying to take in account for the blurry pixels. Every laser varies, but I am usually running around 300 DPI or more.
@@CorneliusCreations hmmm it looked pretty clear to me. it was a png.. should it be like a jpeg or svg for example instead? I'll try the 300 DPI... for power and speed I do 100% and 5mm/s for stainless steel.. does this should right?? Thank you so much for responding!
Hi, does anyone know how to make lasered creations on the xtool colored? It's advertised as being able to engrave 340+ colors but I can't find anything on how to make the colors appear...
What kind of prepping you are doing for photo portrait engraving on birch with that fast speed and low power? I've struggled to get good quality on my 20w D1 pro. Hope you can help me.
The machine is compatible with different file formats, including SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, and many more. Both vector graphics and raster formats are supported.
I am struggling to learn lightburn maybe I should try laserbox instead. One problem I am having is I think because there are to limit switches on the d1 it seems to slam into the outer edges and makes a awful noise when that happens. My question is how do I stop that from happening. Appreciate your encouraging video
Home first. Then learn about where to start the job; current position vs exact dimensions. Also be aware of start location (the 9 dot grid). If you’re starting at top left and you’re engraving “selected items” they must be at that edge of your on screen project. In other words, if you have vertically, A, B, C and are only engraving B and C, it will skip the location of A even though you’re not outputting it. Also if you have the Blue laser head (with red crosshairs) make sure the Offset is on, for the IR head, it should be off. There are some great tutorials available. www.youtube.com/@TheLouisianaHobbyGuy this guy is good, but has the remarkable ability to take a strong five minute video and stretch it out to twenty. Loves to hear himself talk, but has lots of good info.
Great video, thank you! Would you happen to know if there is a setting for the framing speed in either the Laserbox software, or in Creative Space? My wife's Xtool D1 10w works great, but the framing is so fast, it's hard to tell where exactly the edges will be. In your video, the framing process was much slower than ours is. We have the latest firmware, and the latest software updates. Thank you!
Glowforge is a good machine, but it is ALSO a C02 laser. Which is more powerful. I am a fan of buying xTool and moving up as you learn how to use a diode laser like this.
I was a laser operator in a small steel factory for many years. At home I had a CNC plasma cutter and have made tons of art projects with it. I am interested in this product but my garage is not heated. Would the below freezing temps wreck the machine? Thanks for the video.
Why not laser on 100% and speed up? (instead of power 70% with 126mm/s) would this give the same result? I'm planning on buying a laser but very much dislike the waiting as I did with my 3D printing. So many hours. So, speed is key for me. Any advise?
Very good question. Depending on the material, lower speeds and higher power may be best. Or higher speeds and lower power. This is why I recommend doing a cutting and engraving test file. It will help you to determine which setting is best for you. If you are use to 3d printing, then lasering will be no problem for you.
They make a 40w laser now. I'm just getting into lasers, but at that power it might be worth it to go to fiber or CO2. You want to talk fast. Their are more experienced people to talk to. Good luck.
Since it’s an open unit you can get an enclosure and smoke filter, but most people will use it in a garage or something where they don’t care about smoke
I've had mine for about 4 months and I am very happy with it. I have the 5 watt version, the 10 watt seems like it does cut better so maybe soon I'll upgrade to the 20 watt module.
@@dulcebellz3857 I've had nothing but great results using the 5w for engraving, initially I wanted to cut 3mm delrin plastic for guitar picks and pickguards but unfortunately It didn't work. I see a few people selling their 10w module only since they have the 20w so I might just save some cash and get that..
@@Blash1 So I made the rookie mistake of trying to cut blue plastic sheets with the blue diode laser, it will cut it but it's such a hassle. I did cut red plastic and it was a lot faster. Blue and clear acrylic or plastic will have some issues cutting or engraving right. 3mm to 5mm wood is fine though.
This is a wood carving dust collector. It's not the best for fumes, but it does collect a lot of the smoke. It works great with the laser in my experience though.
🔥 xTool Black Friday Sales & Cyber Monday Sales (ends on Nov 30th PT)
👉 xTool S1 NEW Diode Laser
US Store: bit.ly/48RUUO9 ($200 off $2299, CODE: XTCUT200)
UK Store: bit.ly/46UVSqV
EU Store: bit.ly/46k7VNE
I recommend THIS updated 20W xTool Laser Bundle 👇
US: bit.ly/20WBundle
UK: bit.ly/xTool-20W-UK
EU: bit.ly/xTool-20W-EU
👉 xTool F1
US Store: bit.ly/3uaPs8Y ($150 off $1699, CODE: XTCUT150)
UK Store: bit.ly/47BxA5O
EU Store: bit.ly/46k7VNE
👉 xTool P2:
US Store: bit.ly/47m6H6c ($250 off $2999, CODE: XTCUT250)
UK Store: bit.ly/3FY9Woh
EU Store: bit.ly/3R2dtZ1
dear, are you interested in TBK laser machine? that must be nice
What a great video with a positive message. I’ve just bought an xTool D1 pro and thought what the heck I’ll get all the accessories! Just working it out now. I must admit, as a total fresher there’s a lot of trial and error required. So appreciate these kinds of instructional and ideas videos.
I'm also new to this. Curious, have you figured out how to center the laser??
I am new to this product and found it exceptionally helpful. I've watched others re: set up of the new unit including the build and you are heads above the rest. You said it's a long video, I find it to be the most informative and I appreciate you covering all the bases.
I run a laser engraver for a lot of stuff at my job and I've always said it would be cool to have one at home, I need one of these! 😂
Haha they are fun!
Thank you thank you thank you Matt!!! I have been waiting for this video for two months since I receive my XTool D1 and F1. My software was part of the demo stage and they have definitely upgraded it. I greatly appreciate your video and now I feel more confident. Thank you very much.
Glad it helped!
Hi my name is hana,trying to buy and be trained on this machine.is it easy?
It's a cool gadget and I wouldnt mind it but its things like this that takes out the soul of working with wood - I like when things aren't 100% prefet, when things arent looking the same, when someone put a lot of work and love in it
I'm looking at this to give me a creative outet from a soul sucking job. Lol
Use masking tape over anything you want to test run. You will have to lower your speed and power but once you get it dialed in just to mark it and not cut through, it works perfectly. I use blue masking tape because the marking turns out better.
Instead of using paint thinner (which is chemically designed to thin oil based paints), you should be using acetone for spray paints where they are ether based. Plus, you wash off the waste into a plastic or metal container, not down your drain where it will pollute your water system (either town water or your water table if you have a leach field).
to piggyback off this, actually just check with your water authority for drainwater if you have city sewage. Many things actually CAN be drained down your normal city sewage (like antifreeze in most places, holy smokes) but never your leach field (like antifreeze, holy smokes)
Instead of using a masking paint that requires thinner or acetone to remove try using water washable tempera paint. Some people brush it on but I invested less than $100 on a Harbor Freight airbrush compressor/air brush set. Apply the tempera paint, let it dry, engrave your image and wash it off with water. That simple!
Fantastic advice, Thank you!
Thanks for this detailed video! I’m going to finally unbox mine tomorrow. I really appreciate you providing us with the settings you used, so helpful.
Glad you enjoyed it!
@@CorneliusCreations Can it do Cups that are not perfectly cilinder? like cups going from shorter in diameter bottom to bigger in diameter top?
@@christopherfigueroa3083 It can, however, not with one image. You would have to do the top part then reset and do the bottom part.
@@christopherfigueroa3083 I know this is an old comment, but go to 9.45 he gives a good demo. ua-cam.com/video/uxW0ykiUBCw/v-deo.html
TY for the video. Your video is professionally done and you are very articulate and make it fun to watch. Keep up the great work. Big Fan.
Wow, thank you! This is one of the best compliments I could have received! Thank you!
I can't my xtool d1 to hook up to the laserbox software.
@@CorneliusCreationsdoes it work on silver
Thanks for the video. Why did you cover the Mason jar with caulk paint before engraving?
hi there im enjoying your videos alot but was wondering would it not be better to use water based paint as it would be easier to wash off?
This video is what I needed!!! Can't wait to try it out. Thank you so much for taking the time to showi us.
You are so welcome!
Awesome video , thank you for all the info can't wait to see more on how to use ImagR for pictures.
I was on the fence for the whole laser idea. But after your video and the release of the 20 watt laser, I’m buying a 20w tomorrow!
So glad you enjoyed the video! Congrats!
What a great tool
It’s pretty fun!!
Looking at the image for the tumbler on the screen it looked correct, whey did it engrave mirrored?
I think he had the rotary rolling the wrong way?
Your right! I'm buying one for sure now!!!! ha. Great video.
Glad you enjoyed the video. I love my laser a little more everyday!
Looking good, dude!
Thank you bro!
Awesome video. Straight forward and very informative.
Glad you enjoyed it!
It’s always great to see a fellow creative champion & encourage others to make their mark! Maybe a small pun intended, lol…FANTASTIC videos & now I completely want one!
Btw, by any chance do you have a separate photography channel?
All this was done on a 10w? Nice! I just got a 10w from Comgrow and it's running well. I hope to get a 20w D1 Pro in Ironman Red one day..
I didn't see a mention on what you are using as an air filter
It is such a good laser. A great tool to any creatives tool set!
Wow great video, unfortunately I already bought it so I could not use the link but once I am ready for the additions I will. Thank you for the work yo've done.
Matt I also have a question about how to get my business started with the XTool laser. Any ideas? And how did you know that the hammer that you engraved would sell for about $40?
Love your video! Newbie question, how do you know which surface requires a coat of paint/lacquer before etching?
Like the video and hope you come out with more for the d1 pro
Thank you! I have one in the works!
thank you for sharing the knowledge and experence.. much appreciated
Thanks for your video, I'm thinking about get one of this laser machine. Could you tell me why did you paint the mason jar and them took the paint off?
Do you recommend air ventilation or if I use in garage, I should not be worried?
Do I need air assist also with this laser engraver? Thanks
I want to do coffee tables - how do I find one with a frame large enough to cover a decent sized wooden coffee table?
Which would you recommend for a newbie to get best deal today on cyber Monday?
What did you do to get the picture of Ray Liotta to turn out well. I'm trying photos but I'm having a difficult getting them to work properly
Looking for the test file. Great video.
Thank you, Here you go! drive.google.com/drive/folders/1LkYyh8dLm7YbRJGzmPsRWC3X2GrOk5oW?usp=sharing
How long will it take to write names or a few words on phone cases , adapters with this machine?
Can this cut a few millimetres deep into Lino? Specifically lino used for Lino prints? Shopping for a machine that can and would love to know if this has been tested with Lino.
Interesting. A little research into prices however tells me the xtool engraver is about 1000x the price of other engravers.
Can I ask where you got the mason jar from? I've been trying to find round jars but all I can find is the jars with beveled edges (more like an octagon shape)
Great video, thanks. Can you link for me where to find the portable air filter that you have?
That is the PSI woodworking brand on Amazon. They stay sold out a lot!
What is the difference between the default blue laser and the xTool 21064nm infra red laser? They quote that the infra red laser is used to engrave metals and similar materials. But you can do that with the blue one too. Does it just work a lot better?
I know nothing about engraving so stupid question, if once done you went over it again without moving the tile, would it engrave deeper?
Looking for something for laser etching tools from small 8mm spanners up to large torque wrenches (at least 2ft long). Is this suitable?
Not this unit unless you get an IR module. I would consider the xTool F1. You will a video of it on my channel. (Only fiber and infrared lasers will mark & etch metal)
Which wattage laser was this D1? I couldn't find it anywhere in your description or the video.
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre-establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
How does it know to etch versus cut right through material? Is that based on speed?
That is an option that you can toggle on. When you select “cut” the laser module kicks into a high powered mode and gives you options for different materials.
What prepping did you have to do for wood portraits?
Thank you! I will probably buy this! Do you know if this can be used inside @120v?
Thanks
You will love it! I think it can. You can do a support chat to make sure!
what kind of table do you have? look great and sturdy
It is a Husky table from Home Depot. I highly recommend them! They are amazing!
Great video I’m thinking about buying one
They are fun machines!
Great video and explanations. I have a graphic and 3d design background and am really thinking of getting this to complement my 3d printing. Thanks for the video
My friend 3d prints. After seeing my laser he said he wants to switch 😁
@@CorneliusCreations haha awesome. Well i have a fdm and 2 resin printers so will not switch completely but the laser tool is impressive
I think it will be a cool tool in your arsenal!
Does anyone have or know where to get a chart for XTool 10watt Cutter, that shows basic power and speed settings. I'm burning up a lot of material trying to find just the right settings. If you have one can you put a link so us beginners have a plase to start
Juast got my D1 20 watt. Question. Can I adjust the thickness of the etching or am I limited to the width of the laser. I would like my outline of an item to be a little thicker.
If I’m understanding correctly, what you are describing would depend on how thick the lines are on the file you are trying to engrave. If you would like thicker lines, you may need to find a similar file someone made that looks thicker.
@@CorneliusCreations thanks for the quick reply. I’m scoring the outline of an image so there are no lines.
Can you engrave phones or electronics as well??
Thank you for this video... I have the f1 and when I upload an image (trying to do a soundwave) it keeps asking for DPI and its a very smudgey result... do you have any recommendations?? Thank you!! Doing this on stainless steel bracelet.
Is the image you dowloaded a high resolution? If you downloaded a low resolution photo, the F1 is trying to take in account for the blurry pixels. Every laser varies, but I am usually running around 300 DPI or more.
@@CorneliusCreations hmmm it looked pretty clear to me. it was a png.. should it be like a jpeg or svg for example instead? I'll try the 300 DPI... for power and speed I do 100% and 5mm/s for stainless steel.. does this should right?? Thank you so much for responding!
N you go over a second time for a deeper etch
Hi, does anyone know how to make lasered creations on the xtool colored? It's advertised as being able to engrave 340+ colors but I can't find anything on how to make the colors appear...
On the portrait did you change the grayscale? Or just steering you show on the video? Thank you for your tips!
Brilliant video with great tips thanks 👍
I can't see the link for the tile test pattern mentioned in the video however 🥺
Thank you! Sorry for the delay, here you go! drive.google.com/drive/folders/1LkYyh8dLm7YbRJGzmPsRWC3X2GrOk5oW?usp=sharing
Awesome video, quite informative. I am now with this machine. I Can’t open this file. Please help
That speed and power template, I can no longer find on site. Can you share that file?
Does the orange gaurd act as an eye protection?
What kind of prepping you are doing for photo portrait engraving on birch with that fast speed and low power? I've struggled to get good quality on my 20w D1 pro. Hope you can help me.
I'm wondering the same.
Nice vid. Why don't you have a honeycomb bed? Also, the Atomstack air assist works and is much cheaper. 😉
I have the honeycomb grid now haha. I’ll have to check that one out!
I cant get this laser to do anything!!! Im sobbing as I type this. So much for xmas presents using this thing!
What’s going on? Have you joined the FB xTool user group?
Do you like laserbox software better than xtool creative? I’m also trying to get lightburn to work with my xtool d1pro 20w.
How did you detect the d1 on laserbox? It’s looking for the laser box machine when I installed laserbox and trying to detect the engraver
Try reinstalling the software and then upgrade the laser though laser box. Also, creative space is really great too
Great Vid!! I get mine tomorrow.... quick question... (I'm a rookie) why do you paint the tiles & jar pre laser??
So the laser will work on transparent or reflective surfaces
This was great man! What were the settings you honed in to get the Ray Liotta image??
can you tell me if you can make a line width .013' and .050" deep
Can you use it on a deer skull
I see lots of video they all say the same, not tell you how or what file you use to get into Laser Box.
The machine is compatible with different file formats, including SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, and many more. Both vector graphics and raster formats are supported.
I am struggling to learn lightburn maybe I should try laserbox instead. One problem I am having is I think because there are to limit switches on the d1 it seems to slam into the outer edges and makes a awful noise when that happens. My question is how do I stop that from happening. Appreciate your encouraging video
Home first. Then learn about where to start the job; current position vs exact dimensions. Also be aware of start location (the 9 dot grid). If you’re starting at top left and you’re engraving “selected items” they must be at that edge of your on screen project. In other words, if you have vertically, A, B, C and are only engraving B and C, it will skip the location of A even though you’re not outputting it.
Also if you have the Blue laser head (with red crosshairs) make sure the Offset is on, for the IR head, it should be off.
There are some great tutorials available.
www.youtube.com/@TheLouisianaHobbyGuy this guy is good, but has the remarkable ability to take a strong five minute video and stretch it out to twenty. Loves to hear himself talk, but has lots of good info.
Where do you source your slate tiles? Brad/model/link of your dust collector??
Hey newbie here. Where do I download the software bc xTool has their own creative software. Thanks!
Right on xTools website. It is called XCS.
Can you use these machines on a 4x4 piece of wood?
Hi, does the 20W laser module be able to engrave silver?
Great video, thank you!
Would you happen to know if there is a setting for the framing speed in either the Laserbox software, or in Creative Space? My wife's Xtool D1 10w works great, but the framing is so fast, it's hard to tell where exactly the edges will be. In your video, the framing process was much slower than ours is. We have the latest firmware, and the latest software updates.
Thank you!
There is a framing speed option in Laserbox
Glad you enjoyed it! Once you get to the framing menu there is a setting to slow it down so you can see!
Will this engrave quartz crystal points?
Can we engrave portret on metal?
I'm doing a coated metal tumbler and trying to get the right settings for it
If you are using the xTool try the settings in this video :)
Can you use this on tempered glass?
what images do you have to purchase to import for the xtool?
You can find a lot of free ones, but you can import DXF, SVG & PNG files. Etsy has a lot of files and you can find free ones on canva.
So if I am looking at GlowForge or this what say you? Also is support good? I know GlowForge is US and this one is China-- Thanks
Glowforge is a good machine, but it is ALSO a C02 laser. Which is more powerful. I am a fan of buying xTool and moving up as you learn how to use a diode laser like this.
I was a laser operator in a small steel factory for many years. At home I had a CNC plasma cutter and have made tons of art projects with it. I am interested in this product but my garage is not heated. Would the below freezing temps wreck the machine? Thanks for the video.
Oh hadn’t thought of that. Would love to know the same
Why not laser on 100% and speed up? (instead of power 70% with 126mm/s) would this give the same result? I'm planning on buying a laser but very much dislike the waiting as I did with my 3D printing. So many hours. So, speed is key for me. Any advise?
Very good question. Depending on the material, lower speeds and higher power may be best. Or higher speeds and lower power. This is why I recommend doing a cutting and engraving test file. It will help you to determine which setting is best for you. If you are use to 3d printing, then lasering will be no problem for you.
They make a 40w laser now. I'm just getting into lasers, but at that power it might be worth it to go to fiber or CO2. You want to talk fast. Their are more experienced people to talk to. Good luck.
*Is this the same company that makes the scan tools?*
would this laser make those silicon ID bracelets and dog tags?
I’m sure it would!
Super cool!!! I wanna play with it!!!
It is a blast!
big job man
What type of air filter are you using with your laser
None right now, but suppose to be getting an xTool one in soon.
So you need a filter for this machine?
Since it’s an open unit you can get an enclosure and smoke filter, but most people will use it in a garage or something where they don’t care about smoke
i need a cheap business card laser engraver machine, any suggestions?
xtool m1?
I've had mine for about 4 months and I am very happy with it. I have the 5 watt version, the 10 watt seems like it does cut better so maybe soon I'll upgrade to the 20 watt module.
I’m glad you like it! It is such a cool little tool!
If ur only gonna cut then jump to 20w but to engrave the 10w is better but over all the 5w is best for engraving
@@dulcebellz3857 I've had nothing but great results using the 5w for engraving, initially I wanted to cut 3mm delrin plastic for guitar picks and pickguards but unfortunately It didn't work. I see a few people selling their 10w module only since they have the 20w so I might just save some cash and get that..
@@TheSpineSplitter1990 was the 3mm too thick for the laser or what was the problem?
@@Blash1 So I made the rookie mistake of trying to cut blue plastic sheets with the blue diode laser, it will cut it but it's such a hassle. I did cut red plastic and it was a lot faster. Blue and clear acrylic or plastic will have some issues cutting or engraving right. 3mm to 5mm wood is fine though.
Do you seal your hammers or portraits on wood with anything?
I’m a fan of satin urethane
@@CorneliusCreations thanks brother!
Great video. Thank you.
Glad you liked it!
Is Makeblock the same as Xtool?
Does the program cost anything or is it free upon purchase?
It is free
What button I need to press to cut
What's the machine which cleans the air? Is it enough to use the laser in the house?
This is a wood carving dust collector. It's not the best for fumes, but it does collect a lot of the smoke. It works great with the laser in my experience though.