Thx for sharing, the issue is not how to refill, the issue is how to bypass errors like 1886 unknown ink level on TR4550, no way to reset it and make it print
Okay I have an update so the printer the Canon TS 3522 I believe its 275 cartridge it's printing color but it's not printing all black that's crazy is there any way to fix this
Good pm..no need to drain first the original ink in the cartridge? Is it ok to refill it with universal ink, eventhough there's a little amount of the original ink? Thank u in advance.
If not a refill, why arent the package ink not being recognized by the copier? Did the instructions attached but still see code E04. No other cartridge works. Not even the XL type.
Canon printers don't actual know the ink levels in the cartridge. It makes a prediction based on the number of pages printed. You can't get rid of low ink warning without changing to a new cartridge. Just refill & ignore the warning.
After draw out the color ink by using the syringe, how to clean it for next time use? Because when you draw out the color ink it is mixed with three color
I usually give the syringe a good wash with tap water if you have time just leave the cartridge standing for 15 to 20 minuets for the ink to soak through then no need to draw ink out.
my black ink cartridge is still not working right i have done everything possible, hot water .etc etc etc and on the nozzle check it only prints the top half of boxes and very few boxes after the 4th row, and only the first BK the second BK is barely there and WAY, WAY out of alignment.. i tried the alignment and just in the black it only prints the printers but very sketchy and alot of missing lines... to be fair I have had this cartridge for awhile, i have refilled it 4 times no issues. Do they wear out? just hoping you may have a suggestion cause these cartridges are expensive here in the Philippines.. thanks!
The sponge in your ink cartridge should not be able to absorb ink effectively. A cartridge can only be filled 2-3 times.You need to change the cartridges.I can give you one for free.How can i contact to you?
This was very helpful, and I really can't thank you enough!
😀
This was very helpful so much.
Thanks alot
😀
Thank you
Thx for sharing, the issue is not how to refill, the issue is how to bypass errors like 1886 unknown ink level on TR4550, no way to reset it and make it print
yep loads of how to refill but nothing on how to overcome the chip set on the cartridge ?????
it's easy just prest the stop button for a while till the u hear the printer clicks that's it
Okay I have an update so the printer the Canon TS 3522 I believe its 275 cartridge it's printing color but it's not printing all black that's crazy is there any way to fix this
Good pm..no need to drain first the original ink in the cartridge? Is it ok to refill it with universal ink, eventhough there's a little amount of the original ink? Thank u in advance.
It's not necessary. You just add the ink.
If not a refill, why arent the package ink not being recognized by the copier? Did the instructions attached but still see code E04. No other cartridge works. Not even the XL type.
Canon printers don't actual know the ink levels in the cartridge. It makes a prediction based on the number of pages printed. You can't get rid of low ink warning without changing to a new cartridge. Just refill & ignore the warning.
@@michaelyoong7 I figured it out. I rerouted one copier to another and reconnected the WiFi to get a complete copy from the first copier
After draw out the color ink by using the syringe, how to clean it for next time use? Because when you draw out the color ink it is mixed with three color
I usually give the syringe a good wash with tap water if you have time just leave the cartridge standing for 15 to 20 minuets for the ink to soak through then no need to draw ink out.
@@ianmcnulty6194 do you know how to reset the ink level, it always showing the level is very low
but does it matter? if the chip will only allow 50 pages for printing?
you can avoid that by holding down she stop button for 5 seconds
my black ink cartridge is still not working right i have done everything possible, hot water .etc etc etc and on the nozzle check it only prints the top half of boxes and very few boxes after the 4th row, and only the first BK the second BK is barely there and WAY, WAY out of alignment.. i tried the alignment and just in the black it only prints the printers but very sketchy and alot of missing lines... to be fair I have had this cartridge for awhile, i have refilled it 4 times no issues. Do they wear out? just hoping you may have a suggestion cause these cartridges are expensive here in the Philippines.. thanks!
The sponge in your ink cartridge should not be able to absorb ink effectively. A cartridge can only be filled 2-3 times.You need to change the cartridges.I can give you one for free.How can i contact to you?
Same problem with my pixma mg2570s
Bạn có làm tại chở Cùa bạn tôi có 212 apson mà hết mực hoài tốn tiền nhiều quá
Can I do this also in the small version of the cartridge?
Tell me the type of the cartridge
.. this is very cumbersome...
Where do you get your refill kit?
Just use any good branded ep-dye ink
These are available everywhere
Amazon.com. Inkjet refill kits
Check out my video description. There are recommended links to related products