Along with all the others I am grateful for your video. It was two years ago I found your video and am still refilling when I can. Of course there are times a cartridge has to be discarded for other reasons but you have saved me from a big inconvenience of buying new cartridges just to refill. Very good video explanation indeed. Cheers
Question: I already did the black color but my printer still saying that doesn't have ink. I unpluged, restarted, place the cartridge back in.. same. Any ideas for it?
I watched another video where the guy explains that you need a “cartridge resetter” just Google Canon chip cartridge resetter and it’s a little blue plastic device. It has a few pins and you need to line it up with the ink cartridge and hold it for 3seconds until a led light on it flashes meaning it is re-set. Hope that info helped.
I watched another video where the guy pushed and held down an button on the top of his printer that had a triangular shaped graphic on it. I didn’t have the same printer, but I figured, there are only a few buttons on the top of my printer. My color light was flashing even though I’d just refilled it and my printer wouldn’t print. I pressed and held down the color button for about 10 seconds. The light did not go out, but when I sent a file to be printed it worked. When I had finished printing I noticed the color ink light was off.
Override command is available for canon printers where the printer just prints regardless of the ink level. To override this just hold stop button and will override the printer ink level
Was hoping he would explain. That's the main part. Printer Ink Levels need to be reset. Got Canon MG series. Press and hold the STOP button for bout 28 seconds. Power off N on. Printer Head may need to be aligned as well. You find that in Canon Maintenance Properties in the program installed(computer). Not available on Android/IOS apps.
The original canon black cartridge is pigment based (PG), while the refill ink is water dye based. Can I refill directly or I need to make sure the pigment based ink is fully run out?
How did you find out which color went in each hole. Also, I have a black 240 xl and xxl, and a color 241 xl. Where would you find the amount of ink that they hold. Thx for the video!! Pg 240 xl - 11 ml Pg 240 xxl - 21ml Cl 241 xl - 5ml in each hole That’s what I found. Hope it’s correct. Lol I’ll probably put a little less in each anyway to be safe
How to reset the ink levels？I have refilled the PG243 cartridge, but when I try to print a document, the system popup a message: Printer is low on toner/ink. and then refuse to print. how to fix it?
Reset the Ink Levels through Canon Printer Program on computer or do it manually by pressing STOP button for 28 secs (Check Printer Manual depending on your model).
I am grateful for this video as it is the most helpful and instructive one I’ve found for my Canon cartridges refill after seeing several others, including the ones tagged under Aomya the brand of ink I bought. Thank you my friend! 🙏🏻
Thank you so much for this video. After falling victim to Canon's "Ink absorber nearly full" (i.e., "buy a new printer") message and Epson's EcoTank scam, I am ready to fight back by refilling cartridges, getting both value for money on the ink, and decreased risk of printer head malfunction due to the long tubes running from ink tank to print head. Your video instructions are very clear.
Okay I have an update so the printer the Canon TS 3522 I believe its 275 cartridge it's printing color but it's not printing all black that's crazy is there any way to fix this
why is it every time I refill ink cartridge...now it wont print....? what is the trick...looks very simple but just wont print....I did exactly as you did.....
Great video! I followed along, but I've run into an issue. The black prints beautifully, the color doesn't print at all. I put 3ml of red, blue&yellow, aligned the heads, cleaned the printer, and deep cleaned the printer. It's like the color is nonexistent. Any advice?
I trusted this video and bought the inks to refill the cartridges, only the test worked, then my printer did not detect the cartridges and it kept giving me the error that the cartridges were empty even though they were full, it is because the ink is not original and All the liquid spilled inside the printer, causing me to lose it. Well they say that cheap is expensive. I regretted having bought those inks. Now I also have to buy another printer. I do not recommend this.
when should we refill ink, i mean my canon cartridge is almost empty , its on 80% empty currently , should I refill it now, or should I wait for it completely empty first
Good day sir.. what is the brand of ink are you using. And is this ink good for printing hd quality picture for frames or will it fade after a couple of months..
When first installing it the printer will ask for permission to update the firmware. If the firmware is updated will this cause the printer to refuse printing after the cartridge is refilled ?
Along with all the others I am grateful for your video. It was two years ago I found your video and am still refilling when I can. Of course there are times a cartridge has to be discarded for other reasons but you have saved me from a big inconvenience of buying new cartridges just to refill. Very good video explanation indeed. Cheers
Thank you so much for this I saved a lot of money from buying ink cartridges. This was very helpful indeed
Question: I already did the black color but my printer still saying that doesn't have ink. I unpluged, restarted, place the cartridge back in.. same. Any ideas for it?
I watched another video where the guy explains that you need a “cartridge resetter” just Google Canon chip cartridge resetter and it’s a little blue plastic device. It has a few pins and you need to line it up with the ink cartridge and hold it for 3seconds until a led light on it flashes meaning it is re-set. Hope that info helped.
@@kiskukac13 Thanks a lot for the information. I didn't know that even existed, it can print like always but surely will check on that. 👍🏻
I watched another video where the guy pushed and held down an button on the top of his printer that had a triangular shaped graphic on it. I didn’t have the same printer, but I figured, there are only a few buttons on the top of my printer. My color light was flashing even though I’d just refilled it and my printer wouldn’t print. I pressed and held down the color button for about 10 seconds. The light did not go out, but when I sent a file to be printed it worked. When I had finished printing I noticed the color ink light was off.
Override command is available for canon printers where the printer just prints regardless of the ink level. To override this just hold stop button and will override the printer ink level
Was hoping he would explain. That's the main part. Printer Ink Levels need to be reset. Got Canon MG series. Press and hold the STOP button for bout 28 seconds. Power off N on. Printer Head may need to be aligned as well. You find that in Canon Maintenance Properties in the program installed(computer). Not available on Android/IOS apps.
The original canon black cartridge is pigment based (PG), while the refill ink is water dye based. Can I refill directly or I need to make sure the pigment based ink is fully run out?
Just keep printing to run out the ink and then you can add the new.
Thank you sir! Excellent quality video, it will save me lots of money .❤
Lighting not great. They keep getting their shadow across what they are filming. Reangle the light. Otherwise it's great. Thank you 😊
Top Red
Bottom right Yellow
Bottom left is Blue
Can i use Epson 102 genuine refill ink to refill canon cartridge?
Yes that will work.
How did you find out which color went in each hole. Also, I have a black 240 xl and xxl, and a color 241 xl. Where would you find the amount of ink that they hold. Thx for the video!!
Pg 240 xl - 11 ml
Pg 240 xxl - 21ml
Cl 241 xl - 5ml in each hole
That’s what I found. Hope it’s correct. Lol
I’ll probably put a little less in each anyway to be safe
Wont work on a Cannon MP250. Have to buy new carthages.
How to reset the ink levels？I have refilled the PG243 cartridge, but when I try to print a document, the system popup a message: Printer is low on toner/ink. and then refuse to print. how to fix it?
After refilling ink, printer is still saying ink low. Is there any way to override this error message?
Reset the Ink Levels through Canon Printer Program on computer or do it manually by pressing STOP button for 28 secs (Check Printer Manual depending on your model).
❤ THANK YOU ❤
You just helped me with my carbon foot 👣
Namaste 😊
I am grateful for this video as it is the most helpful and instructive one I’ve found for my Canon cartridges refill after seeing several others, including the ones tagged under Aomya the brand of ink I bought. Thank you my friend! 🙏🏻
Glad it was helpful!
Hi, Marie. I just happen to have that brand of refill in my Amazon shopping cart. How is the quality of the color printouts?
Friend, you have just saved a lot of money for a lot of people, myself included.
The only question is: where do I get an ink refill set like that?
Thanks, Ink is avilable on Amazon.
If Canon Pixma mx 472 is available on very low price $100, is it worth buying?
Sir , thank you sharing information, please say about canon cartridge 810 and 811, how to fill ink in cartridge, make a video
Thank you for making this video!
After refilling the cartridge, how do I reset the ink level counter? Canon MG3620
How do I know the number of the inks to buy? I think all inks have a particular number on them.
My printer is not printing the color after refilling it am getting blank papers for color prints but black prints are amazing.. any suggestions?
I don’t even need to refill my ink yet but I want to try it 😂😂
This is my kind of ASMR
Fill it Slowley! SLOWLEEEEEY!
Thank you so much for this video. After falling victim to Canon's "Ink absorber nearly full" (i.e., "buy a new printer") message and Epson's EcoTank scam, I am ready to fight back by refilling cartridges, getting both value for money on the ink, and decreased risk of printer head malfunction due to the long tubes running from ink tank to print head. Your video instructions are very clear.
Thank you! I couldn’t figure out a way to make the hole bigger. I can’t believe I didn’t think of something so simple as a screwdriver 😂
Not red not blue.. Is Majenta and Cyan
Excellent video , thanks for showing us how to refill ink that will save lots of money to buy new canon cartridge .
very helpful thank you
Okay I have an update so the printer the Canon TS 3522 I believe its 275 cartridge it's printing color but it's not printing all black that's crazy is there any way to fix this
why is it every time I refill ink cartridge...now it wont print....? what is the trick...looks very simple but just wont print....I did exactly as you did.....
Can you please refill CL210 and CL211 for Canon Printer?
Thank you kind Sir.💥🌈
Great video! I followed along, but I've run into an issue. The black prints beautifully, the color doesn't print at all. I put 3ml of red, blue&yellow, aligned the heads, cleaned the printer, and deep cleaned the printer. It's like the color is nonexistent. Any advice?
Good afternoon. 👋☀️ I would like to know how do I refill the 241XL color ink and the 240XL black ink for my Canon Pixma MX470 series printer? 🖨️
Thank you for the excellent instrcutions!
I trusted this video and bought the inks to refill the cartridges, only the test worked, then my printer did not detect the cartridges and it kept giving me the error that the cartridges were empty even though they were full, it is because the ink is not original and All the liquid spilled inside the printer, causing me to lose it. Well they say that cheap is expensive. I regretted having bought those inks. Now I also have to buy another printer. I do not recommend this.
when should we refill ink,
i mean my canon cartridge is almost empty , its on 80% empty currently , should I refill it now,
or should I wait for it completely empty first
Nice direct video
Good day sir.. what is the brand of ink are you using. And is this ink good for printing hd quality picture for frames or will it fade after a couple of months..
You can use any ink they are not same in quality as Canon supply. If you need quality then use Canon ink.
I don’t think I made the hole derp enough?? It bubbles as I insert the ink
Great video thanks.
Followed your directions, but only getting yellow to print? What did I do wrong?
Soo all ink cartridges fill up the same way
yes
Thank you!!
You're welcome!
Thank You !!
This is a well-made video, with clear instructions.
How do you solve when I just refilled ink but the black looks faded like it is still low on ink? Can you help me on that?
Follow maintenance procedures of said printer and choose the nozzle cleaning option.
I like this better then the other videos, you make it a lot easier!! They make it to difficult!!
Glad to hear that!
Ty :)
So much thanks friend! So simple!!
Thank you! 🎉
Do u know why the printer doesn't recognize the ink ?
how much millimeter for all 3 colors to refill
3-4 ml
Can you refill the canon 275 and 276 cartridges like this?
Yes
Does this work for the XL versions of these inks or just the regular?
I've just done this on my class carrtragies alls working well 👍🏼
How do you know where to install the color ink? Like where each color ink goes where
Check inside the hile by dipping a needle
@@CopyPrintScanChannel Great answer thank you ❤️
Thank you so much!!
You're welcome!
When first installing it the printer will ask for permission to update the firmware. If the firmware is updated will this cause the printer to refuse printing after the cartridge is refilled ?