Це відео не доступне.
Перепрошуємо.
Remove Harley Davidson Reflectors Install Saddlebag Latch Inserts
Вставка
- Опубліковано 12 лют 2018
- Ill show you how to remove your Fork Reflectors and saddle bag latch reflectors safely and replace them with custom inserts. Very easy install guys that can be done in minutes. The saddle bag inserts are from Joker Machine and match my Joker machine Brake and Clutch reservoir covers. Manufacturer Part Number: 04-501-3
FOLLOW ME!
Facebook - / stevenleehousden
Facebook Group SIK Baggers - / 427595487637128
Instagram - sikbaggers...
Twitter - StevenHousden?lan...
Gear
Camera- Sony 4K AX53 - www.amazon.com/Sony-FDRAX53-V...
Wireless Mic - Samson Go Mic Mobile - Samson-Mobile-Professional-Lavalier-Wireless/dp/B0749WP3M3
Wired Mic - Maono - gp/product/B01M4J5WCM
Shotgun Mic - Comica - gp/product/B06XBX3X7K
Video Tripod - COMAN-KX3636-Professional-Aluminum-Camcorders/dp/B01NA8PIZX
Ultra Tripod - gp/product/B01419PIMK
Light Tripods Zomei Z818c- gp/product/B013YDWR46
Zomei Z818 - gp/product/B013UESDJC
Video Lights - Samtian LED Video Lighting - SAMTIAN-Camcorder-Barndoors-Batteries-Photography
#sikbaggers #advanblack
The video content is available for informational and educational purposes only. Steven Housden, SIK Baggers and/or Advanblack does not make any representation or warranties with respect to the accuracy, applicability, fitness or completeness of the video content. Steven Housden, SIK Baggers and/or Advanblack does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any video content. The information contained in the multimedia content (“Video Content”) posted represents the views and opinions of the original creators of such Video Content and does not necessarily represent the views or opinions of Company. The mere appearance of Video Content on the Site does not constitute an endorsement by Company or its affiliates of such Video Content.
Steven Housden, Advanblack, SIK Baggers assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user.
Check out Devin Bates Video and the technique he used. Pretty cool!! Thanks again Devin!
ua-cam.com/video/JxN5hBLgNyI/v-deo.html
Anytime Brother
I got to give a comment to this. I just recently changed my reflectors. If you try and pry that like this gentleman is showing, you will end up messing up the paint on the inside, around where the reflector is. By prying on that you’re prying up against the paint, and you will damage it.
A better option, would be to take a screwdriver, or drill, gently drill a screw into the reflector, now you have a screw head to grab onto with pliers and very easily pull off your reflector without damaging anything around it.
Thanks for the video. Just got a new bike and wanted to remove those reflectors and your video was exactly what I needed to know.
Thank you
Tex
glad to help Tex!
It’s the little things that set yours apart from others. Like the bike keep it up 👍
Thank you Jason. Much appreciated man. A few more small details coming up.
Thanks for the info. I never thought about using fishing line or dental floss.
Yes sir...Works perfect with a little heat and wont damage anything. Thanks for checking out the videos brother...be safe!!
Great video,, easy explained instructions.
Thank you Bobby! Ive done a lot of these since I made this video and whew! Some are pretty stubborn and some really easy..get you some goo gone for sure lol
Great video. Thanks!
I'm new to MOD DIYs...and this is a very helpful video!
Awesome..this is pretty old one...check out out channel we have ading a ton more since then! Glad they are helping you! Any questions just let me know.
@@sikbaggers WILL DO!!!
Great video! That’s how I removed my reflectors from my chrome latches on previous bikes. To safely remove them from painted latches you’ll need to carefully drill a small hole through the reflector and backing plate near one of the corners. Insert a pick with a 90 degree end and pull them off. Heat helps but isn’t really needed with this technique. If anything gets scratched it will be covered up with the new latch inserts/reflectors
Right on
Thanks for the vids. There are well done!
Thank you! Much appreciated...I am glad they have helped. Be safe!
Great information
glad to help!
I like it !!
Great videos! Tell me about those saddle bag lids please....
These are Advanblack Dual 6x9 lids. You can check out this video here I made on them ua-cam.com/video/nYaowHeLK6A/v-deo.html ..they can be purchased at www.advanblack.com
Do you have any experience or product ideas for bag organization for the advan black extended bags?
Julius Olguin I actually just had this conversation today.. I have a buddy that has one on order. I will see if he gets it in if we can do a video on it. I will at least find out the brand for you and post back here.
Did this horn,solo bad boy horn,two to three times louder than st ock.have one my street glide love it give a try
Yes sir,...we have installed a few of those on buddies bikes! Very loud!
Reflectors serve an obvious purpose. I want as much visibility as I can get.
Where did u get the saddlebag lids.....they look great...
Hey Frank these are dual 6x9 Speaker lids color matched from Advanblack ...Check the link here www.advanblack.com/stretched-saddlebags-for-harley-touring/14-17-stretched-saddlebag-lids/dual-saddlebags-dual-6-9-speaker-lids-for-harley.html
Is it the same for removing the reflectors on the 2018 painted fork legs
What I do on the painted legs is the blower dryer and then peel from the edge with my fingers...they will come off. Then use the goo gone to clean up the mess...avoid using anything sharp to scratch the goo off, it will scratch the paint.
Get yourself some hard nylon glass installation sticks. They can be your best friend for doing projections like this or for cleaning tight areas!!! HEY, where did you get those extended side covers???
Ah yes didnt even think of that...Nice! They are cheap too and I bet they would come in handy a lot The side covers are advanblack prototypes. We should be releasing them soon color matched.
Do they make the in black, instead of chrome.
Yes sir they come in Chrome, Black and contrast cut. Check out Revzilla...Thats where I got these Search Joker Machine Finned. They make several parts in this style.
What size windshield is that on your bike
6.5 inch klockworks.. I have a video on how to measure for your bike and your riding style.
How much does the chrome piece cost? I have mix feelings on removing safety equipment.
these inserts range from 40 to 200 depending on what you want. you can search for 14+ saddlebag inserts and find a ton of them.
@@sikbaggers Thanks.
Where can we buy these?
you can buy them at alot of places..they are Joker Machine Finned saddlebag inserts. Here is where I got them from revzilla www.revzilla.com/motorcycle/joker-machine-finned-saddlebag-latch-inserts-for-harley-touring-2014-2017
Guys I'm looking for a seat. I have a '15 street glide special. The stock seat just isn't cutting it for the wife. She is used to the touring seat that was on my heritage we traded in. It had a one piece mustang seat. Anyone have a nice seat beside stock for the street glide?
Hey Patrick, I know a lot of guys run a thicker seat from www.mustangseats.com/category/Seats Some of the choices will give you and your passenger more thickness and some give just the passenger more and keeps you low. Check them out...I have not personally ran any of the seats but they are talked about very highly in the forums.
How much is a factory exhaust sell for a street glide special 15 trying to sell
Hey Louis..unfortunately not very much. Its usually the first thing that gets changed on a bike..so they are dime a dozen. I see them go on ebay for around 70 bucks free shipping for the slip ons and around 100 if your getting rid of the entire exhaust including the headers. You could try adding them on some of the facebook bagger pages. I through mine up in the garage attic.
Steven Housden thank you very much!
Reflectors are for bicycles.
Amen!
Hey and you can put an on and off switch on the headlight. Cool.
(Loud yell from within the house)
"Devin!!! Wheres my hairdryer???"
Great video! Subbed!
hahha! Thanks man!
@@sikbaggers what area of the country are you in?
@@nbt3663 Im in Southern Illinois
@@sikbaggers cool! Thanks for answers!
Living in Florida and having a black bike I can just leave her outside for an hour and it should be well and warm.
yes...that Florida sun just hits different lol every time I go there I say that...whew!
My wife has the same dam thing on her hairdryer, I’m almost tempted to ask what the hell do you do with that?
LOL...well i know it worked great for directing heat to the reflector!
@@sikbaggers yes it did, lol
WD-40 works 10 times better than Goo Gone.
oh yeah there is a ton of ways to get goo off..zippo lighter flood works great too