Token Ninja BB386 Bottom Bracket Fitting Guide
Вставка
- Опубліковано 21 жов 2024
- Token Ninja BB386 Bottom Bracket Fitting Guide - TF38624 If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com...
Buy Me A Coffee
www.buymeacoff...
Support the channel via the Patreon Page
/ freetocycle
Follow me on Instagram
www.instagram....
info@freetocycle.co.uk
Thanks for watching.
Your videos are the best, real world tutorials!
Your videos are great! Even though I'm not interested in some topics I keep watching. Your knowledge and skill to pass it down is amazing! Never stop helping us!
Very well explain as always.Merci!
Well done.
Great explanation and video content
I have this type of Token BB for my Winspace frame. I like it. have not had any problems with it. The one I received did not come with the shims but instead came with a 2.5mm spacer.
hi, I ordered a T1500 Winspace frame and I want to install a Token BB86 thread fit on it and an Ultegra Di2 12 v groupset, may I need some shims or spacers or it works without nothing? thanks, cheers from Italy
@@jdpowell69 I installed the BB without the shims and have had zero problems with it.
@@wrosado71 thanks a lot, cheers
Thanks for the video! What are the tools used here?
What is the process if you have to remove this full BB? From this video it appeared that both sides had normal threads, tightened to the right, so I assume with tools on both sides it would loosen to the left. I saw your other video of replacing the bearings. In
Absolute Belter You Pal.🎉😂
Great explanation, do you know what size tool is needed for a 41 diameter shell.....?
Thanks.
I'm thinking to do this for my Trek (BB90, junk of a BB), I can see the Pros but are there any cons? i.e. the bearing is too small etc?
Tks👍👏🏻
To minimize any BB creaking noise, Threaded BBs all day compared to PressFit BBs right?
Depends usually on the roundness of the carbon finish on the frame. Many frames(even expensive ones) aren't machined that well which causes pressfit BB's to creak due to an unround hole and poor fit.
Hello what exactly crankset you have is possible to give me specs and how many speed thanks good video
Thank you for you informative video! I see it is packaged with the bearings already inside. Is it possible to get the bearings out?
Token Ninja BB386 Bearing Change
ua-cam.com/video/2FJ5Yj9FW2g/v-deo.html
How can remove only bearing?
great explanation, why do you put the shims on the BB sides? Cheers from Italy
The shims will protect the frame from rubbing with the tool or the CNC notches of the BB. Mine did not have the sims, only the spacers. If I had them I would put them because I don't trust the CNC finish of the 16 notches.
@@panagisloukatos7799 thank you. I had some problem to fit the Ninja (very hard to install), but probably was the fault of small diameter of the BB on my frame
Hi what park tool name please? Both tool name please thanks