Woodturning Part 1 a Simple Segmented pen from Walnut and Beech. An introduction to Segmenting Pens.
Вставка
- Опубліковано 17 бер 2021
- Turning a Simple Segmented pen from Walnut and Osage Orange. A simple introduction to Segmented Pens. Part 1
Please contact me at woodenitbenice001@gmail.com
My Website; wooden-it-be-nice.co.uk/
My Facebook; / woodenitbenicepensandg...
My Instagram; / _woodenitbenice
If you liked this video please Like (Thumbs Up), Comment, Subscribe, Share and hit the Notification Bell to be notified of my future videos
Jiggsy’s Channel; / @jiggsysshed
Affiliate link to Starbond Products; www.starbond.com/?rfsn=544319...
Discount code for 10% Off Starbond Product's whole range; WIBN10.
Tools Used;
Axminster’s Web Site;
www.axminster.co.uk/
Axminster AT1628 Lathe (Now called AT406WL)
Axminster Pen Jaws Part No; 103670
Axminster Evolution Compression Mandrel Part No; 506445
16mm Round Carbide Cutter
Pen Press 2MT from Charnwood.co.uk
DeWalt DW 3501 Bandsaw
Glues;
Starbond Thin Superglue
Finishing Products;
Mirka Abranet 120 to 600 Grit
Starbond Thin Super Glue
Starbond Medium Super Glue
Micromesh Pads 1500 to 12000
By no means is this video instructional or educational. This video is purely for entertainment. It is recommended that you receive instruction in the field of woodworking before attempting any woodworking. Tools and machines can be dangerous if used incorrectly.
My videos are for entertainment purposes only. When using any tools/machinery always read & understand the manufacturer's guidelines & safety instructions.
Please be responsible for your own safety.
If you are in any doubt don’t do it! - Розваги
Hi Huw... firstly.. many congratulations on reaching the magical 1 thousand subscriptions... it's long overdue and much deserved... great instructions on how to do segmented pens... looking forward to part 2 ... only one suggestion... the out takes of you forgetting what on earth you were doing should be at the end... Haha... sorry... take care my friend...All the best.....Andy
Hi Andy, Thank you so much you were joint first subscribers with Gary, as I can remember having none and then 2 at the same time.
I wish I had thought of doing out takes when editing but my brain was a bit frazzled by that time because I just couldn't think of what I should be doing, even though I have made loads of these.
Once again Andy a HUGE thank you as if it wasn't for your time and patience helping me put a video together I wouldn't be at this stage now.
Take care my great friend.
Cheers, Huw
Hello Huw, you give a clear explanation of how to make the segmented pen blanks and I look forward to part 2 and the finished pen. Cheers, Hans👍👍👍
Stay safe and keep turning
Hi Hans, Thank you very much. Video will be up on Thursday. Take care Hans. Cheers, Huw
We all have "those days"! Congrats on the milestone!
Hi Dave, Yes we do aren't they great. LOL. So pleased with the sub count I must admit. Take care Dave. Cheers, Huw
Patiently waiting for part 2!
Hi Wesley, Thank you very much I hope you like it. Take care Wesley. Cheers, Huw
Very interesting glue up Huw! For sure it can be fun trying to keep all those flips and flops in order but you got it and they are going to be very cool!
Looking forward to seeing the end result as I know it will be very interesting.
Sure looks great seeing the 1K up there...congrats you have earned it.
Take care my friend,
Gary
Thank you Gary, I confused my self on this one. It really is a simple process.
Back down to 999 now. LOL. Take care my friend. Cheers, Huw
Looking good so far!!! Love the details on the step-by-step!!!
Thanks Daniel. In hind sight I should have written the processes down first so I could have been more organised and it would have flowed more. Take care my friend. Cheers, Huw
Thanks for the short tutorial. It helped cleared a few things for me.
Thank you Jabulani. Hopefully Part 2 will be entertaining as well. Take care my friend. Cheers Huw
Great video, I'm glad I've found a fellow Welshman turning on UA-cam.
Thanks Mark, there a few of us Welsh turners on YT.
I live in the Rhondda, what part of Wales do you live in if you still live in Wales.
Thanks for watching and taking the time to comment.
Take care Mark.
Cheers, Huw
@@WoodenItBeNice I'm down the road in Llanelli.
@@markduggan3451 Brilliant. Really nice place to live.
Never really ventured into the pen making business Huw but you made it look simple enough with your skill!
Hi Ian, Thank you so much for the compliment. You should give it a go and if I can help in any way please let me know. I have dozens of Slim Li e kits I really don't use so if you want a few to have a go I'll gladly send you some along with a set of bushings. Let me know. Take care Ian. Cheers, Huw
@@WoodenItBeNice Cheers Huw! Might take you up on that at some point! Congrats on 1k subs by the way!!
@@IanMacWoodturning Hi Ian, Thanks on the congratulations. As for the kits when your ready send me an email or PM on FB with your address (both are in the about section on YT) and I'll post you 6 or so. I literally have dozens which I don't use and are just sitting dust in a box. Cheers, Huw
Absolutely enjoyed watching as always. Love watching while I’m at my favorite coffee shop. Congratulations on the 1000 mark. Well deserved. Have a great day Huw .
Thank you so much Randy. I slipped back to 997 yesterday but back there again. Take care my friend. Cheers Huw
Looking forward to part 2 mate, think its going to be a good one
Hi Connor, Not quite finished yet so will probably post next week. Take care mate. Cheers, Huw
Hearty congrats on the 1k subs, Huw! Well earned. Cheers! Rod
Hi Rod, Thank you very much for your support since Day 1. Take care my friend. Cheers, Huw
I'm liking what your doing Huw, I never even thought of doing wiggly cuts, all the best.👍
Thank you Kev. Hopefully all will be revealed in Part 2. Take care Kev. Cheers, Huw
Merhaba Huw,
1000 abonelik için kutlarım. Bu güzel bir haber. Sırada 10 binlik abonelik görmek istiyorum. I am sure that I will see a nice pen in the final. nice design. I'm looking forward to the finale. A work full of pleasure and experience. See you. Big greetings. Yours sincerely, Mehmet.
Hi Mehmet, Thank you so I hopefully won't disappoint you when it is finished.
Take care my friend, Cheers, Huw.
PS Posted the sticker last Friday so should be with you soon. Huw
@@WoodenItBeNice You're welcome. keep doing great work. I'm looking forward to your sticker. Yours truly.
@🙏🙏
Congratulations Huw with the 1k subscribers. Well done.
What a fun way to make segment pens. I also like to make pens from scraps of wood, but never thought of making segments.
I'm looking forward to part 2.
👍Frank.
Hi Frank, Thank you so much. This is how I started segmenting pens. Hopefully Part 2 will be as enjoyable. Take care my friend. Cheers, Huw
very cool Huw! I look forward to the conclusion!
Thanks Chris, Probably be next week as my back has taken a step back over the last couple of days, hopefully only a short term set back. Take care my friend. Cheers, Huw
I would use medium for gluing, given the choice. I've been wanting to try these cross, curvy segments... if I ever get back to the shop. The blanks look great. Nice choice of woods. Okay, gonna check out the next video. See ya there!
Hi Ted, Thanks very much. I have never tried Medium so should give that a go really. Thanks for the tip. Take care Ted. Cheers, Huw
PS Give them a go they are fun and you can get some really interesting pens from this process.
Can't wait to see the final process. I turned a pen recently and forgot how much time it takes for each piece and part... doesn't speed up time having to move a camera around either! Looking forward to Part 2
Hi Jay, Thanks very much. I could probably make one of these in an hour or so without videoing it. You are right when you introduce a camera the timescales go out the window. Take care Jay. Cheers, Huw
Looks like a great start.
Hi Doug, Thanks mate, hopefully Part 2 will be a good ending. Take care Doug. Cheers, Huw
Looking forward to part 2 Huw
Hi Tommy, Thanks very much. I hope you enjoy it. Take care Tommy. Cheers, Huw
Hi Huw Congratulations on the 1k brother!! Looking forward to seeing the completed pen. You’ve reached a nice milestone, well deserved!!
Hi Bruce, I'm looking forward to finishing the pen as well. You are part of a small group that commented on my first video and are still with me on reaching 1000 subs. I truly appreciate that. Take care brother. Cheers, Huw
Hey Huw...I think keeping the pieces in the right order would give me a serious brain fart🤪 looking forward to the finished product... stay safe buddy...press on 😎 Joe
Hi Joe, They did give me a brain fart. LOL. I just had a total brain melt for a few minutes. I have made loads of these but I just couldn't think what I needed to do. Comes with age I suppose. Take care Joe. Cheers, Huw
Firstly congrats on your 1K well done Huw . OK you got me interested and curious . looking for part 2 . the blank looks Unique .
Thank you Ahron, That means a lot. Hopefully Part 2 won't disappoint. Take care my friend. Cheers, Huw
Congratulations Huw on the 1k subs 👏🏼👏🏼👏🏼, nice recovery on the blanks 👍🏻 I use those little squeeze clamps as they are handy but not good for applying lots of pressure, I tend to go back to the trusted cast G clamps. You should try 6 part series vids 😂. Cheers Steve
Thank you Steve so much. You've been subbed to my channel for a long time for which I am extremely thankful. I think I need to buy some medium sized version that will give a better clamping pressure. Might well go for G Clamps. 6 parts, no thank you. LOL.😂😂
Looking good! Congratulations on the 1k👍😎
Thank you so much my friend. Finally got there but will no doubt dip below again as I keep losing subs. Take care Luie. Cheers, Huw
I LIke it!!
Thanks Mike. Part 2 out later. Cheers, Huw
Clever was to cut and glue up the blanks. I assume bandsaw cuts don't produce noticeable gaps ? Can't wait for the final installment. Keep them coming Huw ! Stay safe. -Mike😷💉
p.s. appreciate you showing us even experts make mistakes. LOL
Hi Mike, Thank you very much. I used a 24 TPI blade on the bandsaw, for this type of work, so there weren't many cut lines, or gaps, on the pieces. I also use the veneer to cushion the joint as well.
I'm not sure I'm an expert but if something goes wrong I show it and then the fix if I can fix it.
Thanks again my friend. Take care. Cheers, Huw
@@WoodenItBeNice Oh yeah, 24 TPI show do the trick just fine. I use 3 or 4 TPI on mine - for cutting log 'n stuff, so is very different. On the other hand my nice finishing hand saw blades have about 10-14 TPI and they're really good cuts - 24 is for metal cutting. Thanks for clueing me in 👍
@@mpart_woodlathe-stuff I know 24 TPI seems a lot but for some of the segmented pens I make it is ideal.
That reminds me I need to buy a couple more. Huw
@@WoodenItBeNice Oh no, I was not saying 24 is too many. Not at all. I wasn't even aware they were available that were for wood and not metal. Especially if they serve you well !
@@mpart_woodlathe-stuff Thanks Mike. Hope you enjoy Part 2
Good job Huw, almost the big 1000 subs, cheers mate
Thanks John, Yes really close now but still losing subs nearly every day for some reason. Take care Mate. Cheers, Huw
Congrats one 1k subs Huw! Great job on the segmented pens so far. Can’t wait to see part 2. All the best, Ollie
Thanks so much Ollie, I really appreciate it. I need to catch up on your videos. How is the new workshop? Do you have power now? Take care Ollie. Cheers, Huw
Hello Hugh! Congratulations ! You have 1000 subscriber now. You have interesting channel, you deserve more subscribers. Best regards.
Hi Captain, Thank you very much for your kind words. I truly appreciate them. Take care my friend. Cheers Huw
Thanks for the demonstration Huw. Will look out for 2nd video. Will have to try some segmented work again somepoint. Hope to see you over 1000 subs soon.
Hi John, Thank you very much. Please do try some segmenting again and show us please. Thanks again John. Cheers, Huw
@@WoodenItBeNice will definitely film it the next time I do something segmented. My first one was before I created my channel back in Oct 19. It was a wedding present for my sister. I only have photos which are up on my Instagram page.
@@JiggsysShed Great news mate. I'll have a look at your IG page to see the pen. Huw
@@WoodenItBeNicethe segmented work I did wasn't a pen as have not done any pen turning yet. It was a snack board with little bowls. So it was not as delicate as your work.
@@JiggsysShed I'll check it out. 👍. Huw
Great work Huw 👍👍👍 only 3 away from 1000👍👍👍
Thanks very Rob, appreciate it. Yes only 3 to go if I don't lose any more which I seem to be doing nearly daily at the moment. Take care mate. Cheers, Huw
Congratulations Huw, you have hit the magical milestone! You have worked hard to get here and now you channel growth is going to be fast.
I am looking forward at seeing Part 2, you may not like to seperate vids, but your health is #1
Keep on turning.
Cheers, Bluey 👍
Thank you so much my friend. I just don't know why I couldn't get this right straight away. Must be getting old. LOL. Take care Bluey and I hope Part 2 doesn't disappoint. Cheers Huw
Love seeing that 1k mark under your name sir :-)
Hi Chris. It was nice for a while, lost one so back to 999. LOL. Take care my friend. Cheers, Huw
@@WoodenItBeNice UA-cam giveth and UA-cam taketh away...hang in their buddy!
@@CruzesLouisianaOutdoors It certainly does. I I certainly will. Cheers Chris.
I hope you won't be angry but I started to giggle as it got more and more obvious that you were getting a bit lost! Sorry! But you really won me back with your remark about Battenburg cake - I completely understood what you were getting at with that remark. The only trouble is that now I really want some Battenburg... Incidentally, I think this is much better done in two vids - there's quite a lot to take in with this method so it's better to spread it out. Good job mate and I'm looking forward to the excitement conclusion.
Hi Mark, I will never be angry with you Mark as you tell it as it is.
I was totally lost at one point. I was sat there thinking what am I supposed to do now??? It comes to someone my age mate. LOL. It's called a senior moment.
I have made loads of these as they sell really well but I just lost it for a while.
Enjoy the Battenberg Cake.
You are right 2 is better than one. I don't know what I was thinking about that I could do it all in one vid without that vid being sooooo long.
Take care my friend. Cheers, Huw
sometimes you have to stretch it out Huw, almost at 1000 subs... thanks for sharing, always take care
Hi Grahame, Thanks very much. Had to be in 2 parts I agree. 3 more to go at the moment, but no doubt that will change as still losing subs. Take care mate. Cheers, Huw PS Make that 4 just lost another one. LOL
@@WoodenItBeNice its very strange, I've been to 715 subs and back down to 712 about 6 times.... seems odd to me.
@@OurFrenchHouseRenovation Hi Grahame, It is very strange. I hit 1000 this morning and then within a couple of hours back to 999 and now back to 1000. 🤔🙄😕
@@WoodenItBeNice I was told that if someone subscribes but doesn't watch a vid within a time frame, they are deleted.. not sure if thats true..
@@OurFrenchHouseRenovation I think I have mentioned that to you before. I was told it by Billy Burt I believe. It is really annoying.
I forgot to say; weren't you over a thousand subs last time?
Hi Mate, no, last week I was on 993 I think but then gained a few and lost a few. Jumped by 3 over night to 997. Cheers, Mark. Huw
Everybody has days, weeks and/or years like that. See you later.
Hi J'Lyssa, Than you very much. Yes we do and we all hope they don't happen too often. I have subbed and hit the bell for you channel. You have some very interesting playlists on your channel which I'm looking forward to looking at. Take care. Cheers, Huw
2 minute video... waffled out to more than 16 😟
Thanks for watching so intently Allan.
Some people, such as yourself may think it's waffling.
Others may think it as instructions on how to make a segmented pen.
Take care and thanks for taking the time to watch and comment.
Cheers, Huw