Which one do you like best and why? Read the blog post and see the adapter plates here --> freedomgorilla.com/blogs/news/top-3-sw-shield-plus-holosun-optics-how-to-mount?yt
Without the need for any adapters, I've got a Crimson Trace Micro Pro red dot on my Shield + .30 S/C and a green dot on my Shield + Performance Center 9 mm. Both work great and fit perfectly.
Great video. It’s surprisingly hard to get good info on the Shield Plus optic mounting process. Lots of info for the 365 and MOS systems, but it’s almost like S&W thought “Well, I guess we have to give people this option, but we’re not happy about it.”
I have the 4" PC model that I would like to upgrade the red dot on eventually. I am reading that a lot of people are having problems with their elevation bottoming out because apparently S&W mills a very slight slope into their cut. I really don't want to send it off to be remilled, or to do it myself with a dremel. Do you know anything about this issue?
@@tickedoff1438I’m in the same boat trying to figure this out. I think the “bottoming out” thing is only an issue when people try to mount dots without a plate because there are some that will seem to fit. I can’t find a concrete explanation though.
I've heard this too. I'm picking up my shield plus on Saturday and I want to get a RD right away. I think I'm going to order a shield or a crimson trace because they have the RMSc footprint that we need.
Will the Holosun HS407K x2 fit the m&p9 shield plus ? My cousin sold it to me for $50 because it didn’t fit his gun and one of the screws was striped and he gave me new screws for smith and Wesson 2.0 from a vortex optic kit he has. will those be fine to use ? They seem to fit good. Also does the “HS”407k just stand for holosun ? I hope I haven’t messed my screw hole threads up.. He also gave me a plate that fits good but sticks out a tad bit to where you can feel it coming out of but sided under the open but barely noticeable.
You need an adapter plate. We sell them. You also need 6-32 screws which don’t come with the optic. The adapter plate has eveything. It’s on our website
Great video. Do i have to shorten the lugs any on the shield slide to make the plates work? Really dont want to have to dremel anything if i dont have to
If your slide isn't milled to be optic ready then you will have to send it off to have it milled or go with a dove tail plate. I have the dove tail but wish I had went ahead and milled my slide. It raise everything up a little to high for my liking plus I had to change my sights
So, you claim the best price available. I just bought a Holosun EPS Carry MRS Green. Your price is $429. I paid $418 INCLUDING tax. Maybe check your competition before making such claims.
We offer our items at the lowest price allowed by the manufacturer and we price match if you find someone violating the price or offering it lower. We’re very confident in our lowest pricing. Thanks for the comment.
Can you get me a owners manual for the holosun eps carry green dot. I have been unable to download it. If you can please let me know and I’ll send you my email address.
Which one do you like best and why? Read the blog post and see the adapter plates here --> freedomgorilla.com/blogs/news/top-3-sw-shield-plus-holosun-optics-how-to-mount?yt
Thank you for all the information. You helped me in making my decision. I put the 507K X2 on my M&P Shield Plus and I'm very happy with it.
Your welcome!
Appreciate the advice. Do you run anything else on other pistols?
Did you use a plate?
Without the need for any adapters, I've got a Crimson Trace Micro Pro red dot on my Shield + .30 S/C and a green dot on my Shield + Performance Center 9 mm. Both work great and fit perfectly.
Thanks for this video. I learned a LOT about red/green dots from your presentation. Great job!!!
Thank you
Great video really appreciate the breakdown on the different versions of the holosun’s
Thanks for watching!
Thank you for the great breakdown of each one. I never understood the differences. Also been looking for the right adapter plates
Can you cowitness with the 407k
I have the 507 in green on my Shield Plus in 30 super carry. Got the adapter on Amazon.
Great video. It’s surprisingly hard to get good info on the Shield Plus optic mounting process. Lots of info for the 365 and MOS systems, but it’s almost like S&W thought “Well, I guess we have to give people this option, but we’re not happy about it.”
lol. Thank you glad it was helpful!
can my regular shield 9mm have a sight? my gun store lady said it couldnt.,, its just a regular m and p shield i think.. very new to this
Does it have an optics cut slide? If not you'd need this dovetail adapter - freedomgorilla.com/products/micro-red-dot-adapter-for-smith-wesson-mp
Any holster brands that are compatible with recover tactical rail and light?
On your website, it says the EPS carry is direct mount is that still the case?
It says that? Eps carry comes with the plate that will allow it to work yes
Outstanding video, with fantastic information: I learned more in this video than in all previous videos, from other knuckleheads! Thank you very much!
Do any of these co witness?
What suppressor/ optic sights I can install with these optics?
Great video! Clear concise explanation!
Thank you! Glad it could help
do you have an adapter plate for shield 9m ez?
Do you know if you can put a Holosun SCS MP 2 on a Shield Plus?
@@562Aksapper you can’t, shield plus is a different footprint
@@freedomgorilla1 can you with an adapter plate?
@ I don’t think a plate exists that lets you, at least I haven’t seen one
I have the 4" PC model that I would like to upgrade the red dot on eventually. I am reading that a lot of people are having problems with their elevation bottoming out because apparently S&W mills a very slight slope into their cut. I really don't want to send it off to be remilled, or to do it myself with a dremel. Do you know anything about this issue?
This is what I want to know about too.
@@tickedoff1438I’m in the same boat trying to figure this out. I think the “bottoming out” thing is only an issue when people try to mount dots without a plate because there are some that will seem to fit. I can’t find a concrete explanation though.
I've heard this too. I'm picking up my shield plus on Saturday and I want to get a RD right away. I think I'm going to order a shield or a crimson trace because they have the RMSc footprint that we need.
Will the Holosun HS407K x2 fit the m&p9 shield plus ? My cousin sold it to me for $50 because it didn’t fit his gun and one of the screws was striped and he gave me new screws for smith and Wesson 2.0 from a vortex optic kit he has. will those be fine to use ? They seem to fit good. Also does the “HS”407k just stand for holosun ? I hope I haven’t messed my screw hole threads up.. He also gave me a plate that fits good but sticks out a tad bit to where you can feel it coming out of but sided under the open but barely noticeable.
You need an adapter plate. We sell them. You also need 6-32 screws which don’t come with the optic. The adapter plate has eveything. It’s on our website
@@freedomgorilla1 okay great I’ll definitely get one thank you
If I buy the eps carry, do I have to buy an adapter plate?
The eps carry comes with a RMSc to modified RMSc plate in the box!
@@freedomgorilla1 so I do not need anything else besides the eps and what comes in box?
@@bradkenel6341 The EPS Carry comes with an adapter plate and screws that will fit your S&W Shield Plus! 🇺🇸🦍
@@freedomgorilla1 thank you!
@freedomgorilla1 do these adapter plates fit on non optical ready shield plus?
Awesome! Thanks for sharing.
Wish they had a chevron version for the shield plus.
Yea people have asked us about it, it’d make sense
Excellent video. Just ordered the adapter plate and green dot holison.
Thanks, we appreciate the order!
Excellent video. Thank you.
Thank you!
What mounts on the mp without an adapter plate
Vortex defender ccw, viridian rfx 11, viridian rfx 15. We have them on our website
The thumbnail.....it looks exactly like my setup. 🤔 Where did y'all take that pic from? Just curious.
What's the thing called on the trigger guard
@@yeah____youdude.sorrymaam2298 i think it's a piece from recover tactical could be wrong tho
Excellent information !!!!!!!!!!!!
Thank you
Great video. Do i have to shorten the lugs any on the shield slide to make the plates work? Really dont want to have to dremel anything if i dont have to
Hey. That’s an option. But not required. We sell adapter plates you can use and you just use it like a shim
Anyone know what light is being used on the thumbnail picture?
It's actually not a light, it's a Recover Tactical S&W M&P Shield Picatinny Rail Adapter
Can I install these sights + plate on a Shield Plus CA version?!
If the gun is optics ready yes
Great video man !!!!
Thank you
are this holosun dot sights fit the 30 super
The 407k and 507k will mount directly to the slide on the 30 super carry shield plus without an adapter plate vs the 9mm version.
Can you mount a sight on the M&p shield ? (Not the +)
Shield 9
If your slide isn't milled to be optic ready then you will have to send it off to have it milled or go with a dove tail plate. I have the dove tail but wish I had went ahead and milled my slide. It raise everything up a little to high for my liking plus I had to change my sights
The closed emitters are not purged with nitrogen are they?
Yes
Great video!
Thank you
What material is the eps plate?
Aluminum
How come the Vulcan has a dot instead of a chevron?
We’re not exactly sure. It puzzles us also
Great video! Thanks for that info. You need a bigger 🎤 though
👍Thanks dude
Yvw
I don't like the way the dot floats around in the glass. Can't get used to that.
Thanks
Yw ty
Must be nice to work for Holosun
To clarify, there’s no affiliation other then we sell their products
@@freedomgorilla1 LOL
XS Big Dot is better than them all.
So, you claim the best price available. I just bought a Holosun EPS Carry MRS Green. Your price is $429. I paid $418 INCLUDING tax. Maybe check your competition before making such claims.
We offer our items at the lowest price allowed by the manufacturer and we price match if you find someone violating the price or offering it lower. We’re very confident in our lowest pricing. Thanks for the comment.
Can you get me a owners manual for the holosun eps carry green dot. I have been unable to download it. If you can please let me know and I’ll send you my email address.
Very informative. Thank you.
Glad it was helpful!