Why Grey Knights Are the Best Army to 3D Print
Вставка
- Опубліковано 27 чер 2024
- Thanks again to my Patreon Aliakai for the chat, check out her channel here - / @aliakai
Join this channel to get access to perks:
/ @battlebrothersam
If you want to support the channel further please pledge to my patreon.
/ battlebrothersam
Amazon Affiliate Links to stuff i use(As an Amazon Associate I earn from qualifying purchases you do after following this link - at no extra cost to you):
Printers / Wash Cure
Phrozen Sonic Mighty 8k - amzn.to/3D2VY2P
Phrozen Wash And Cure Station - amzn.to/44ycDHd
Phrozen Aqua Grey 8k Resin - amzn.to/3rejC9T
Sunlu ABS Like Resin - amzn.to/3pLy3BQ
Airbrush Kit (The kit I use)
Fengda Kit: amzn.to/3Tdsar5
Follow me on Twitch - / battlebrothersamyt
This video was inspired from channels like Midwinter Minis, Goobertown Hobbies, WintersSeo, Say Hi Paul, Squidmar Miniatures, Miniac Painting, Black Magic Craft, Real Terrain Hobbies and Geek gaming scenics.
Become a Patreon and get access to the discord community! www.patreon.com/battlebrothersam
I also had the Grey Knights on the brain. Dry brushing on that base layer over a black prime is very satisfying.
If cold weather is affecting your prints, have you tried a heater? There are USB rechargeable hand/pocket warmers. They are not much, and do not produce a lot of heat, but in an enclosure they can raise it a few degrees. I like the ones that have multiple settings.
I found putting it in hot water for 5 minutes work
@@nischal711 Not gonna lie, took me a solid minute to wonder why you would put a printer in water...
@@RoseKindred yeah I meant the resin bottle
Sunlu do a 3d printer enclosure, £30 for a heatproof tinfoil box that keeps your goo toasty - I’ve been using in the garage at -2C and not had a failed print yet!
i m a beginner in 3d modelisation i really like that but i have some problems to print my creations. In resin print, are supports easiers to remove? I buy a glue for sticking my differents pieces but it dosent work. What is the glue you are using? Thank you.
did anyone got a link to where I can find the Gry Knights on 3d cult or makers cult? cuz I want to print them (just the fraction name on these platforms would be good too.)
Thank you
They do!
I've got a 2000pt army ready to go with exactly those models!
Can you tell us briefly the painting steps you took.
They turned out a really great tabletop standard and I want to try it out on a few
I wonder how the smoke was painted in the first mini to have that blue effect
How do you do not to get little holes when you remove the supports? Sometimes even hot water doesn't do the trick...
You guys NEED to look at DMG Minis for Silver Wardens.
pretty sure he did a video with DMG
I'm pretty sure they are the wardens
@@garethnicholson7515
Awesome. Definitely looks like it. I'm on DMG Minis Patreon, and he posted a note that he might be redoing the entire CAP kits this month on Patreon for all the past models, including the Silver Wardens.
You probably know all this, but for those who don't, his Dreadknight is absolutely amazing. It makes GW's look even more silly than it already does. Putting it together was like building a professionally made model kit.
He even made an add-on for it that converts it back into a baby-carrier version (which I literally have printing right now on my Saturn 3 Ultra). The cloak alone made the print job take 4 hours due to the height!
In his Silver Wardens edition of the GW "baby-carrier" Dreadknight add-on, you can make the Grandmaster inside have no legs - with hoses and wires instead connecting to the torso of the Dreadknight. It makes the baby-carrier Dreadknight make more sense - like a way for the maimed Grey Knight to work alongside his brothers despite being legless, but not quite broken enough to be entombed in a Dreadnought.
Sorry for the book-length response. I'm just pumped about these bad bois.
@@Lesardah I have the knight just trying to finish him up. His models are great
@@garethnicholson7515 I printed several so I could try it the Artis Opus Nemesis Dreadknight method. (Base with drybrush, shade, then drybrush over shade).
If you post it anywhere, HMU when you finish. Would love to see it.
lets goo! grey knights are dope
These are a decent army to print in my opinion. My main is eldar but i did always like the knights and these kits are amazing plus the big dude. Play wise has opened up a bit since a recent points reduction allowing for more unit's on the field especially if like me you take all terminators
can you share the link to the 3D files?
Was hoping that Death guard won the poll, as I want to start up a DG army, but trying to work out what they are called on stl files is a little tricky, same with a Chaos Brigand knight, trying to find these things is hard 😞
It really isn't. All you need to do is search for death guard and most stuff would come up.
@battlebrothersam I’d go out on a limb and say if you get no response, they may not want to be featured. Normally that’s a pretty straightforward clue. Smooth.
What files are these?
Well i'd say Tyranids would be the best army to print. but the top creator was nuked, i wonder why.....
Quit moaning, the files are easily found if you’re not a mong.
Because GW are litigious, they were too close to their ip, and the creator used copyrighted keywords.
they gave permission to be in his video, it's not Sam's fault they got nuked.
Grey knights are one of the army's I'm doing but I'm converting them into my own 11th legion
And I was lucky I was able to find free files that are really close to the official ones for literally everything I need except for the three named characters the actual grandmaster grandmaster voltas and the leader of the purifiers the one with the demon sword but I have a proxy for all three of them and those three are my Primark unit so far I just have a strike squad and a Terminator squad and a castellan Crowe proxy but when my brother gets more resin I'm going to have him print out more so I can get closer to my thousand point army I just haven't decided if I'm going to do a librarian tech marine or apothecary
Grey Knights are best boys, I'm a book nerd so I gotta simp for them.
Budget custodes
Please don t stop making these videos
So I have to wonder if the sisters work so closely with GK and are as faith driven and devoted as well is there a reason the GK don't look for sisters to serve in their chapter under lesser capacities due to the lack of augmentations?
GK's undergo the same sort of process as Astartes. Only males can accept a progenitor geneseed. Until Games Workshop puts Kathleen Kennedy in charge, anyways.
Grey Knights do lend themselves to 3d printing, since each one is a Big Damn Hero there's a good justification to use non GW armour bodies as Artficer armour base, bedecked with third party weapons and bits.
But if you're doing a series on which faction is best to 3d print.... Orks. Orks iz best. End of. Series over. Done. You're welcome. Where's me consultancy cheque?
You should check out Scylla legion
The real question is where to even get the files :( at least for general models
You keep the dream alive
Where's the best site to find Grey Knights STLs?
games workshop we see you!
brother, best army to 3d print are drukhari, like everyone I know who plays them prints at least half of the army
Brother you want to find the army you want to fully commit to? You want all of them, You will never settle for one 🤣😂🤣
WOAH, the paint job on them looks amazing, great work. not going to lie, this has given me the edge to print a few grey knights.
Death korps for me tbh
Can someone tell me who made these stl's? If the creator doesn't want the smoke for designing them then they should stick to making dnd minis or something
guy already got nuked thanks to this video.
@@flameknightdragon well that can't be true because I don't know who the printer is from this video so gw certainly wouldn't either
I had high hopes but I don't like those sculpts at all, their proportions are all weird.
Hmm, the creator didn't want you to credit him. I wonder why...
it is like every person he showcases from gets nuked.
Armageddon steel legions are best to 3d print)
Sadly none of the stl are quite the level of quality i want them to be, especially compared to the most recent gk model whoch is castellan crowe, which is most likely what the updated range will look like
Look up DMG Minis, he made the whole GK range. Great details and quality of sculpts
Grey Gawr imo are the best
Check out DMG Minis Silver Warden line.
I have quite a few bits from them and their Grey Knights are amazing. I think they're slightly shorter than Primaris, but better proportioned than GW Grey Knights.
Your cryptography skills must be next level. Good job.
Grey knights getting nuked next huh
already happened
@@flameknightdragon indeed
@@flameknightdragonwhole channel is a playbook for gw
The amount of wash you put on those Grey Knights is a crime
That's just how oil washes work :P
Agreed. It needs to be cut by 30 to 50%.
Nah, i understand printing guard saying it is different regiment, but grey knights? Their 3d printed models style is too different.
Wouldn’t you know it, this creator also got a visit from James within the last couple days. Dude, here is you next challenge: Make content that doesn’t flush other people’s livelihoods.
i find it funny that he got no reply from the guy and went through with this video anyway. You know what he got no replay. every STL maker he worked with got nuked
@@flameknightdragon 💯 By now everyone knows it’s the touch of death. And if he leaves the name out of the video, one of the mouth-breathers will happily spell it out for everyone.
Its funny that your random discord patreon supporter happens to have a better mic than you do lol
less of whats her face please