If I'm leaving the Monsoon amp, but have basically the same NVX kit you have, do I use the wires coming to the midbass as my input on my crossover and then run new wires to each speaker from the new cross over? Can the tweeter be installed in the factory location with the factory grill covering it?
Do you sell these speakers, adapters, etc? If so, do you sell an entire collection of all the speakers, tweeters, crossovers, amplifiers, connectors, etc. for a 98-02 F-Body? I’m wanting to replace all the speakers, head unit, factory amp, and upgrade to something better sounding. My speakers are basically blown. I’ve been searching but getting confused on what I need. If there was one big option to buy it all together then I would be a happy customer. Let me know. Thank you
Crossovers are required if they come with the speaker set. They protect the speaker from frequencies it cannot handle. You can alternatively find a speaker set with integrated crossovers to eliminate the need for an external setup like ours.
I got a pair of speakers and just soldered the stock connector to them and put them in the car do you think that would cause my tweeter to not work? because they don’t seem as loud
If you have the monsoon amplifier still in operation, generally that Monsoon amp put's out it's power around 2 ohms for this channel, and depending on how you have it wired, it may be 4 ohms. Raising the impedance will lower the sensitivity making the speaker sound quieter. What we did on this Firebird is we also added a 5 channel amp and bypassed the monsoon amplifier for much better volume and performance.
@@ProvoBeastAudio all I did was take out the mid range speaker and connect those 2 wires to the speaker. Stock tweeter and no crossover, do you think if I hooked up the stock tweeter connection to the high connection on my aftermarket speaker would make it louder?
Remove your door panels and on the top black weather stripping (where the window goes down into the door when you roll it down), remove all the staples holding the black trim on. The staples didn’t let the the plastic contract with the cold and heat so the plastic would crack instead. Replace all the staples with zip ties, you will need to drill out the staple holes to make them bigger. Then reinstall and it won’t get any worse. I was lucky enough to stop mine before the cracked. I’ll get my video uploaded to UA-cam one day showing how I did it.
@@noesparks337 I had a small crack on one of mine. I got it pushed back together like it should be. Used tape on the front side to hold it together, then took JB plastic adhesive and glued the crack on the backside. Kept the crack together. Not near as noticeable, something to try until you find new door panels. Those can be a dick to find depending on color. Good luck
A crossover separates the high and low signals and blocks the chosen frequency to keep from killing the tweets with bass signals, or to keep from killing subs with distortion from high frequency signals.
The firebird has its own crossover for the tweeters
Can confirm
What size n kind are the tweeters
If I'm leaving the Monsoon amp, but have basically the same NVX kit you have, do I use the wires coming to the midbass as my input on my crossover and then run new wires to each speaker from the new cross over? Can the tweeter be installed in the factory location with the factory grill covering it?
Where do you put the tweeter in the door on a Camaro?
In a firebird door swapped in
Can you do a video on bose systems. I have a 96 camaro rs with bose system. I I like to replace my door speakers.
What is the size of that NVX Tweeter or model number? TY!
Do you sell these speakers, adapters, etc? If so, do you sell an entire collection of all the speakers, tweeters, crossovers, amplifiers, connectors, etc. for a 98-02 F-Body? I’m wanting to replace all the speakers, head unit, factory amp, and upgrade to something better sounding. My speakers are basically blown. I’ve been searching but getting confused on what I need. If there was one big option to buy it all together then I would be a happy customer. Let me know. Thank you
Has anyone mounted tweeters in the A pillars or dash? I don't like the stock soundstage at my feet.
What amp did you use or what do you recommend? I'm running a pioneer touch screen head unit
Can I run those front speakers with tweeters without the crossover? No interest in a subwoofer.
Crossovers are required if they come with the speaker set. They protect the speaker from frequencies it cannot handle. You can alternatively find a speaker set with integrated crossovers to eliminate the need for an external setup like ours.
I got a pair of speakers and just soldered the stock connector to them and put them in the car do you think that would cause my tweeter to not work? because they don’t seem as loud
If you have the monsoon amplifier still in operation, generally that Monsoon amp put's out it's power around 2 ohms for this channel, and depending on how you have it wired, it may be 4 ohms. Raising the impedance will lower the sensitivity making the speaker sound quieter. What we did on this Firebird is we also added a 5 channel amp and bypassed the monsoon amplifier for much better volume and performance.
@@ProvoBeastAudio all I did was take out the mid range speaker and connect those 2 wires to the speaker. Stock tweeter and no crossover, do you think if I hooked up the stock tweeter connection to the high connection on my aftermarket speaker would make it louder?
Thanks for the vid. New firebird owner. My only gripe is we all have cracked doors XD
Remove your door panels and on the top black weather stripping (where the window goes down into the door when you roll it down), remove all the staples holding the black trim on. The staples didn’t let the the plastic contract with the cold and heat so the plastic would crack instead. Replace all the staples with zip ties, you will need to drill out the staple holes to make them bigger. Then reinstall and it won’t get any worse. I was lucky enough to stop mine before the cracked. I’ll get my video uploaded to UA-cam one day showing how I did it.
@@Bird-dl7xs i seen a video of that somewhere. Mine were cracked when i got it. So i gotta find new door panels and modify those before they crack
@@noesparks337 I had a small crack on one of mine. I got it pushed back together like it should be. Used tape on the front side to hold it together, then took JB plastic adhesive and glued the crack on the backside. Kept the crack together. Not near as noticeable, something to try until you find new door panels. Those can be a dick to find depending on color. Good luck
What's a crossover?
A crossover separates the high and low signals and blocks the chosen frequency to keep from killing the tweets with bass signals, or to keep from killing subs with distortion from high frequency signals.
He nice if you helped out the camaro guys that don't have separate tweeters