Awesome job Aaron, I love Truman boots. I own that same boot but with the 20 last, one of my most comfortable boots. I use otter's wax with that boot, really restores the wax flesh look.
That’s a great product, I used a little bit of mink oil cause the costumer wanted to take care of that. How do you size on the 20 last comparing to 55? Thank you!
@@AaronG2480 I size down 1/2 size from my Brannock size. Since I am 9.5 Brannock, I ordered 9 in Truman (79 and 20 last). I love the 20 last, so comfortable (I like toe space)
@@patrickmiao1698 If I'm a 10 Brannock, that needs toe space and wears darn tough merino wool socks which would you recommend on the 79 last? I wear a 9.5D in alden Indy. Waiting on my first PNW boot white's MP on the 5050 last and they suggested 9.5E.
Life got really busy again, and I have fallen behind on your videos. But that's okay. It means I have a bunch of your videos I get to watch!!! Anyhow, you did a great job as usual on these boots, and I look forward to catching up on what you've been up to! ✌
@@AaronG2480 check out some of the boots I have posted on my channel. One day you’ll get them in the shop! I think the first pair will be the JK forefront my work boots. I just picked up the amazing shoes by quan the shoemaker.
Awesome Job, those boosts looks great. With leather filler your used, is there any concern it might squeak with the leather midsole ? I see some times brands like Nicks will use a thin slip sole in between thicker leather layers.
Nice work. I think/hope Trumans currently use cork filler instead of rubber/foam. I love the Vibram V100s even if they're a PITA to install. Aaron, do you have any experience installing Dr. Sole Tumaz soles? Are they a comparable alternative?
Hey can you do a video on what soaps and conditioners you recommend for certain leathers? Personally I own oro legacy moc toe and iron ranger amber harness. I think I’ve seen a few where you mention some but I can’t find that video.
Fiebing’s saddle soap and Cadillac leather conditioner is what I mostly use You can also use -Bick 4 -Venetian shoe cream I highly recommend Red Wings Neatsfoot oil blend (Leather cream)
Great video! Two questions: at 8:00 you're driving screws. Yeah? And I wish you would show a shot of them at the very end, all finished. Because I bet they look amazing.
@tonymoore2100 Trumans don’t have screws, it’s actually the type of soles what uses screws in this case the vibram 100 Non of the Truman Boots have Vibram 100
why the thin piece of leather instead of cork is that why you didnt hammer the middle of the leather mid sole cause it would have curved in cause the gap was to much
The leather I used is as thick as the (foam) the boots come with. Reason I didn’t hammer the (midsoles ) is because I always press the welt first and then I hammer the midsoles Soles Just didn’t record that part. Leather is better than cork,some times I use it even though I don’t get pay for it. 99% of the times I use (cork ) BTW the fact that you saw (the gap you mentioned) Is because the Welt was not totally flat yet. If you pay attention you’ll notice that when I showed the boots the soles are just normal (flat) Cheers
Trumans usan cuero un poquito más grueso que Red wing y( siempre) traen Leather midsoles la variedad de cueros es más amplia y cuestan algo más de dinero, la verdad me gustan las 2 pero soy más de suelas suaves o wedge soles. Nicks son extremadamente gruesas en su cuero un poco más caras que Truman,hasta ahorita no tengo ningunas pero las eh visto y la verdad no son para todos, no solo por que sea gruesa la piel le gustan a todos. Saludos
Truman Java Waxed Flesh. Everyone needs a pair of these boots.
Those things are tanks now! 💪💪
*Wow incredible work for this customer! You really brought them back to life!*
Que linda pátina tienen las botas y como siempre un gran trabajo Merlín. 💣💥👏🏻👏🏻👏🏻🐐🧙♂️🫡🍾
🍻🧙♂️🖐🏻👊
Awesome job Aaron, I love Truman boots. I own that same boot but with the 20 last, one of my most comfortable boots. I use otter's wax with that boot, really restores the wax flesh look.
That’s a great product, I used a little bit of mink oil cause the costumer wanted to take care of that.
How do you size on the 20 last comparing to 55?
Thank you!
@@AaronG2480 I size down 1/2 size from my Brannock size. Since I am 9.5 Brannock, I ordered 9 in Truman (79 and 20 last). I love the 20 last, so comfortable (I like toe space)
@@patrickmiao1698 If I'm a 10 Brannock, that needs toe space and wears darn tough merino wool socks which would you recommend on the 79 last? I wear a 9.5D in alden Indy. Waiting on my first PNW boot white's MP on the 5050 last and they suggested 9.5E.
Love your work, good job!
Fantastic craftsmanship 👍 👌 👏
Those came out great!! Really like that look
Life got really busy again, and I have fallen behind on your videos. But that's okay. It means I have a bunch of your videos I get to watch!!! Anyhow, you did a great job as usual on these boots, and I look forward to catching up on what you've been up to! ✌
😅 Hey it’s nice to hear from you MAB
Thanks a lot for watching the videos!
Beautiful job, as always.
Thank you! Cheers!
Beautiful Job!
Thank you!
Buena noche. Desde la CDMX..te felicito x darle vida a todas esas botas
🖐🏻👊🙏
They look Awesome! Thanks for sharing.
Thank you for watching 🙏
Me encanta esa suela🔥🔥
Yo la odio 😂😂 es extremadamente trabajosa
Great boots. Your work is amazing
Thanks a lot Qltyboots
You're really a good cobbler!
🙏 just trying my best
Chido! Buen trabajo Aaron, como siempre.
Gracias!🍻
Buen trabajo y que reconfortante resulta ver tus vídeos. Saludos !
Gracias Andrés!
Damn your so good and humble. Where can I donate? I don't live in LA
Voy a mandarte mi par de IR’s!
Como siempre un trabajo excelente eres un buen zapatero puro de 10 de 10
Muchas Gracias
El maestro🔥🔥🔥
🙏🖐🏻👊
Espectacular hermano! Ahora me dio ganas de poner esa misma suela en mis 8111 de trabajar pero color honey 😂😂
No por favor 🙏
😂😂😂😂
Nice you do it again Aaron
La verdad Que si te la rifas primo💪🏻👍🏻 saludos desde phx 👍🏻
Saludos Sosa muchas gracias! 🖐🏻👊
Those boots sure are covered in allot of sno-seal or some kind of dubbin, wow. I think those soles are going to outlive the boots!
Yeah They’re actually the Waxed flesh ones.
Amazing job
🙏
@@AaronG2480 check out some of the boots I have posted on my channel. One day you’ll get them in the shop! I think the first pair will be the JK forefront my work boots. I just picked up the amazing shoes by quan the shoemaker.
Beautiful repair
How I wish you are near me
Awesome Job, those boosts looks great. With leather filler your used, is there any concern it might squeak with the leather midsole ? I see some times brands like Nicks will use a thin slip sole in between thicker leather layers.
Nice work. I think/hope Trumans currently use cork filler instead of rubber/foam.
I love the Vibram V100s even if they're a PITA to install.
Aaron, do you have any experience installing Dr. Sole Tumaz soles? Are they a comparable alternative?
I’ve done a couple of pairs
Is just another lug sole
(Dr.sole)
The new Truman Boots use cork instead of (foam )
Thanks 🙏
Hey can you do a video on what soaps and conditioners you recommend for certain leathers? Personally I own oro legacy moc toe and iron ranger amber harness. I think I’ve seen a few where you mention some but I can’t find that video.
Fiebing’s saddle soap and Cadillac leather conditioner is what I mostly use
You can also use
-Bick 4
-Venetian shoe cream
I highly recommend Red Wings Neatsfoot oil blend
(Leather cream)
@@AaronG2480 awesome thanks for the feedback! Can’t wait to contact you for mine to be repaired!
Would it be possible to keep that colour on the midsole at 8:49 ?
ANDO ...... ESTRIÑIDONNNNNN CIRILO
Bien matonas, te quedaron.
Listas para matar viboras saludos Silver!
Great video! Two questions: at 8:00 you're driving screws. Yeah? And I wish you would show a shot of them at the very end, all finished. Because I bet they look amazing.
I did use screws
Forgot to take a picture of that
Thank you
@@AaronG2480 I didn't know bootmakers used screws! I guess you learn something every day...
@@tonymoore2100 you’ll see that mainly on PNW boots such as
Nick’s
Wesco
White’s
@@AaronG2480 I didn't know that! I have a couple pairs of trumans but never looked to see if they had screws
@tonymoore2100 Trumans don’t have screws, it’s actually the type of soles what uses screws in this case the vibram 100
Non of the Truman Boots have Vibram 100
why the thin piece of leather instead of cork is that why you didnt hammer the middle of the leather mid sole cause it would have curved in cause the gap was to much
The leather I used is as thick as the (foam) the boots come with.
Reason I didn’t hammer the (midsoles ) is because I always press the welt first and then I hammer the midsoles Soles
Just didn’t record that part.
Leather is better than cork,some times I use it even though I don’t get pay for it.
99% of the times I use (cork )
BTW the fact that you saw (the gap you mentioned)
Is because the Welt was not totally flat yet.
If you pay attention you’ll notice that when I showed the boots the soles are just normal (flat)
Cheers
Can you please tell your thoughts on the Truman Eugene soles? Are they soft enough or should I go wedge?
To me they are a bit hard
I personally like wedge or soft soles over rubber soles, but that’s just me
Some people love rubber soles, is not my case
@@AaronG2480 thank you so much. Love and watch your work.
Como te gusta los Truman’s comparando a los Redwings o los Nicks?
Trumans usan cuero un poquito más grueso que Red wing y( siempre) traen Leather midsoles la variedad de cueros es más amplia y cuestan algo más de dinero, la verdad me gustan las 2 pero soy más de suelas suaves o wedge soles.
Nicks son extremadamente gruesas en su cuero un poco más caras que Truman,hasta ahorita no tengo ningunas pero las eh visto y la verdad no son para todos, no solo por que sea gruesa la piel le gustan a todos.
Saludos
Great job as always Aaron! I love watching your videos.
Thank you David I really appreciate your support