Backstage photos and photo with materials are now available through Patreon. If you like my projects and you wish to help me make bigger and more better projects please feel free to contribute. Link: www.patreon.com/user?u=5557620 Similar Fidget Spinner on ETSY store: www.etsy.com/ru/listing/522126230/fidget-spinner-handmade-copper-brass?ref=listings_manager_table
Whoever hates this is disrespectful this dad was kind enough to make a request for his son. Me personally I know my dad wouldn't do this, but I know he worked hard for his son to make this that I really sweet does anyone agree?
It's wonderful to see that such a simple thing can still fascinate young people. Now we just need to figure out a way to get them outside and do something active,
Just wondering if you have a lathe? You could put the copper pipe rings on a wooden mandrel at a low speed to perform the sanding and polishing. Would have saved yourself a lot of time and manual effort. Just a suggestion.
If you don't have that handy dandy deburring tool you can use a marble, bigger than the pipe, and a piece of sand paper. You put the sand paper on the pipe opening (grit down) and the marble on top and work it back and forth until the pipe is deburred.
dont say bad things to people do not dislike this youtuber cause he worked so hard to do this and showed you guys how to make it do not follow people that hates other people even tho they are poor and they need help go up to them and say do you need help then bring hem somewhere safe so they dont get hurt and to be sure do NOT follow BAD PEOPLE then your not gonna be part of Gods children be good to evryone in every contry 😄
Professionally done, the efficiency is very well. I recently made a tutorial on a diy fidget spinner (on my channel) but I wouldn't say it's as perfect as this one.
my only dislike of this video was the cleaning of the bearing with a wd40 I've been long boarding long before these became cool and one of the worst products to use on bearings is wd40 its not a lube but rather just dries out all the lubricant in the bearing (and yes cleans out all the rust and dirt left within the bearing as well) I just wonder how much better that spinner would've span if the bearings had been relubricated afterwords..... beautiful spinner all in all and just fun to watch huge thumbs up from me 😁
nice to see your still around man , btw I'm still working on those 3D model versions of your lamps I'll make sure you get a link to them so you can enjoy them there too p.s. steampunking is hard on pc's XD
Oh this looks kinda easy you only need a metal pipe, a blow torch, a special pipe cutter thing, a thin metal rod, bearings, sandpaper, a towel, a little bit of metal polisher and maybe some acetone. Easy ;-;
Un vídeo muy trabajado muy currado y el spinner muy bonito y bueno que, yo si lo viera en una tienda y me pusieran este vídeo para saber como los hacen lo compraía sin dudarlo, muchas gracias.
Wonderfully made!
I'm not really into spinners. But thats just a beauty!
Its a little rough while spinning, you coud have heaved it.
Can we all just acknowledge this guys super fast sanding skills!!! Whoa !!
Backstage photos and photo with materials are now available through Patreon. If you like my projects and you wish to help me make bigger and more better projects please feel free to contribute. Link: www.patreon.com/user?u=5557620
Similar Fidget Spinner on ETSY store: www.etsy.com/ru/listing/522126230/fidget-spinner-handmade-copper-brass?ref=listings_manager_table
Banjo Show ii
Banjo Show Кому взаимную подписку.Я очень стараюсь подпишитесь.
Adrian Moraru ne abonăm reciproc?
MIy naym is Joshua 🏡😇🤕😎🌈💰🔫📲📟🗡🏹🛡🏰⛲🏀
Banjo Show dude what's the music name
You probably made your kid the king of the playground! Nice job!
this video doesn't deserve dislikes it deserves likes because this guy works hard and is professional at making stuff so undislike and like it NOW.
nah
i just got a brain tumor reading that
lol
haha lol that's not funny brain tumors are a serious thing I HAD A BRAIN TUMOR EVER SINCE I WAS 5
i like yor videos
Thats some serious hardwork
This channel deserves more subscribers
Excellent job. I really respect attention to detail like cleaning up the solder joints. And the drawer pulls, very nice.
Now that is the first actually good diy spinner I've seen :)
This, sir, is art! I am amazed. This is not your average $5 spinner. Well done!
Who watched this DIY but didn't actually do it?
George Harvey every one does that
George Harvey me
George Harvey me
George Harvey me
George Harvey i havent... yet 😂😂😂
looks like many glorious wedding rings had a child with a full metal body fidget spinner. wonderful. simple but complex. love it.
Good spinner
But how to make it?
Did you even WATCH the video??
GengarDoesNotAgree SoLeave Well Im pretty sure they did. The UA-camr just didnt go into enough depth for it to be a "how to.."
R U BLIND?
trolled😂😂😂😂
Valerio Samo
b
Compressed air test! push it to the max. Thanks for sharing.
А в оставшийся отверстия можно светодиодную подсветку поставить
Хорошая идея)
Serious DIMA WTF
Если не понятно всегда можно воспользоваться переводчиком
Serious DIMA Кому взаимную подписку.Я очень стараюсь подпишитесь.
wut?
Whoever hates this is disrespectful this dad was kind enough to make a request for his son. Me personally I know my dad wouldn't do this, but I know he worked hard for his son to make this that I really sweet does anyone agree?
1:03 the flash
Ekags d
Ekags YASSS!! I WAS LOOKING FOR THIS COMMENT!!
Ekags
This guy is working hard for his videos.
Don't dislike.
Who else was playing with thier fidget spinner
While watching
ME! HOW DO YOU KNOW
SuperXon 201 cccccdbdfd
DudeGamer TV fuck
😒😒😒😒
What A Hand Make Spinner...This Is The Best spinner ever i seen
who watches diy videos but never does them?😃
This Fidget Spinner is beautiful and works very well, I enjoyed it.
Я так понимаю я один русский?
)
нас уже 3ое)
4-веро )
+1 )
Alen B. vi o
It's wonderful to see that such a simple thing can still fascinate young people. Now we just need to figure out a way to get them outside and do something active,
wow, cool fidget spinner
beautiful music, amazing hand craft, great attention to detail, beautiful design..... for a fidget spinner
but in all honesty this was enjoyable to watch and the spinner looks great!
*algum BR aqui?*
Breno Cavalcanti eu porra
Breno Cavalcanti xablau carai
Breno Cavalcanti pimba
Breno Cavalcanti Nóis
Também faço vídeos. Se alguém quiser dar uma olhada... :)
What a beautiful work, maybe the best design I have seen. And maybe the longest spinning time :)
your hand is a fidget spinner
Emix 24 wut
exactly what I thought when he was sanding in circles lol I kinda chuckled, funny I'm not the only one
Flavia Alessandra 9
24k subs? And over 1 mill views? Under 19 hours??? You deserve a round of applause
Read The description, it was the request of his son👏
So pretty!
عاشت ايدك
هِګر ګلأّشٍ يا اخي الراكل اجنبي كيف يفهم عربي
هِګر ګلأّشٍ alluh akbhar :v
كذا كويس
نعم انها المخدرات
هِګر ګلأّشٍ هالناس كيف بنفكر
awesome man . u can cut the empty rings from where they touch the side bearing so it would look like a tri spinner.
it beatiful
This is super nice. It looks great and it doesn't seem too hard to make
Who's watching this with socks on?
XxGigixX me
who cares
this is far better than the ones people buy. also it is a good looking one
When you can't afford a fidget spinner..
but you can afford a 300 dollar tool kit
The materials used to make this amazing spinner is more than 10$ but it is actually worth it!
Mohammed Dabbagh If you have skill
sAvi0r chRisT is t
please explain the tools he used that add up to 300 dollars...
thanks for uploading this video on UA-cam and now anyone with interest in do it yourself can catch-up with one on one steps
есть кто русский???
Нет
Настя Лукина Sou do Brasil e você é de onde? ?
hola
I made one myself, It actually came out decent, Thanks for the tutorial.
god dog
Thanks to you man!u worked really hard.
amazing work man
loving it and you
I enjoyed your build process
Just wondering if you have a lathe? You could put the copper pipe rings on a wooden mandrel at a low speed to perform the sanding and polishing. Would have saved yourself a lot of time and manual effort. Just a suggestion.
That's so amazing.I'm so amazed by that.
If you don't have that handy dandy deburring tool you can use a marble, bigger than the pipe, and a piece of sand paper. You put the sand paper on the pipe opening (grit down) and the marble on top and work it back and forth until the pipe is deburred.
The best fidget spinner ever crafted. Did a great work man. Thumbs up 👍
Nicely done. An attractive and well-functioning FS.
Only 18 hours and already 1 M views. You deserve it mann
you deserve more subs man great video!
three more bearings, i think it is gone spin longer, amazing idea wow ✌👌👍😲😲😲
The best of all ..... Congratulations!
That is one beautiful fidget spinner!
Hey, big thanks for using my music in this video, keep up the cool content man :)
Thank you for the good music)
dont say bad things to people do not dislike this youtuber cause he worked so hard to do this and showed you guys how to make it do not follow people that hates other people even tho they are poor and they need help go up to them and say do you need help then bring hem somewhere safe so they dont get hurt and to be sure do NOT follow BAD PEOPLE then your not gonna be part of Gods children be good to evryone in every contry 😄
Alan Pasion SALUTE U MAN
4 YUR THIS THINKING
That spinner looks cool
Extra, really extra, very good work
Professionally done, the efficiency is very well. I recently made a tutorial on a diy fidget spinner (on my channel) but I wouldn't say it's as perfect as this one.
Ok, now that is a spinner. Beautiful.
Nice, Very Nice !!! The Best (looking) spinner I've seen so far.
This fidget spinner is so beautiful
Sir Banjo watching this video is so relaxing. :)
This is on my recommended that means this video will go viral
Great work and awesome video production. Keep it up!
my only dislike of this video was the cleaning of the bearing with a wd40 I've been long boarding long before these became cool and one of the worst products to use on bearings is wd40 its not a lube but rather just dries out all the lubricant in the bearing (and yes cleans out all the rust and dirt left within the bearing as well) I just wonder how much better that spinner would've span if the bearings had been relubricated afterwords..... beautiful spinner all in all and just fun to watch huge thumbs up from me 😁
The best looking fidget spinner.
I actually think fidget spinners are useless but this crafting with the nice looking shiny metal is cool.
nice to see your still around man , btw I'm still working on those 3D model versions of your lamps
I'll make sure you get a link to them so you can enjoy them there too
p.s. steampunking is hard on pc's XD
I look forward to seeing them.
Дуже гарна річ вийшла! Супер!!!!
Спасибі)
this is what we call perfection 😍
Can you cut the 3 outside of the three empty pipe sections to make a traditional profile?
hermoso realmente hermoso tu trabajo , amos los trabajos bien ejecutados
Nice fidget spiner models!
Oh this looks kinda easy you only need a metal pipe, a blow torch, a special pipe cutter thing, a thin metal rod, bearings, sandpaper, a towel, a little bit of metal polisher and maybe some acetone. Easy ;-;
Wish I could buy this 😍😍😍absolutely class video
120 second Absolutely never seen before 🤘🏻
This video will go viral. Just wait and you'll see!
вау крутой спиннер получился! я смотрел на время он крутился ровно 2 минуты!
very very good👍
Try a bearing-in-bearing (like HARKEN large rigging blocks for sailboats)assembly of the central part. U'll be amazed with spinning time ))
Fantastic job. Very well.. can you turn it into a gyroscope?
dude awesome spinner you made there bro
That is the coolest fidget spinner I've ever seen I mean it's AMAZING the coolest thing in the universe
I have most of the tools but can you tell me exactly everything used in this video please.
Keep up the phenomenal work
what a spiner man i like it
Does anybody know what he uses for the "button" on the bearing?
Un vídeo muy trabajado muy currado y el spinner muy bonito y bueno que, yo si lo viera en una tienda y me pusieran este vídeo para saber como los hacen lo compraía sin dudarlo, muchas gracias.
what you put to the baring
Thats a cool fidget spinnner!!!!!!
What was the the rivet press thing you put in the middle bearing?
i like this Diy video great job!
And one more questions what type of fuel you use to clean bearing
WD-40
what did you use as the buttons i cant get the material link to work
Para que sirven los rulemanes que no giran? solo el del medio es el que hace todo el trabajo.
why do you need 3 more bearings besides the center one?
great suff man you have just given me a good idea thanks