Backstage photos and photo with materials are now available through Patreon. If you like my projects and you wish to help me make bigger and more better projects please feel free to contribute. Link: www.patreon.com/user?u=5557620 And if you want a similar fidget spinner you can buy it on my ETSY store: www.etsy.com/listing/525580772/steampunk-fidget-spinner-handmade-copper?ref=listing-shop-header-0
The only acceptable fidget spinners are those hand made from quality materials by a talented craftsman. Most people don’t know this, but that’s how “fidget spinners” began. Simply being called Torque spinners. You should name this one: “planetarium perpetuity” It reminds me of two stars dancing in each other’s gravitational field. Excellent work, my friend.
How did you get the smaller inside bearing to fit in the larger bearing without coming loose? I seen no solder or glue.. Also how did you get the copper ring to stick outside the larger bearing without coming loose? Again no glue or solder? Looks like you sprayed lubricant??? Is it just pressure fit?
What are you spraying on the small bearing and the large ball bearings before pressing them into place? Is it something that chills them to shrink them to allow you to press them into place?
@@BanjoShow how much does it shrink? So I commented a few minutes ago asking about how it fits. It expands when it warms up? This seems very complicated to measure the original fitting hole for bearing. What if we make the hole just a little to large...
Ok, how did you get the two knobs to screw together? Impossible, they are both threaded the same and you cut a piece of threaded rod from the supplied screw and used that.. Think about it. Everything else was really nice, good job on the build. Let me know about the knobs though. Was one reverse thread?
Backstage photos and photo with materials are now available through Patreon. If you like my projects and you wish to help me make bigger and more better projects please feel free to contribute. Link: www.patreon.com/user?u=5557620
And if you want a similar fidget spinner you can buy it on my ETSY store: www.etsy.com/listing/525580772/steampunk-fidget-spinner-handmade-copper?ref=listing-shop-header-0
Banjo Show h
Banjo Show you just made a factory grade fidget spinner
Banjo Show dm
Banjo Show amazing video.. thank you for sharing....🐴🐶🐴🐶🐴🐶🐴🐴🐶🐁🐀
Banjo Sho
The only acceptable fidget spinners are those hand made from quality materials by a talented craftsman. Most people don’t know this, but that’s how “fidget spinners” began. Simply being called Torque spinners.
You should name this one:
“planetarium perpetuity”
It reminds me of two stars dancing in each other’s gravitational field.
Excellent work, my friend.
That's awesome.. Fidget spinner.. making...😉😉😉😉😉
DE PLUS EN PLUS FORT DE PLUS EN PLUS BEAU BRAVO CONTINUEZ
And another viral video was born
Excellent work Banjo!!!
Thank you)))))
Awesome mate! Very beautiful
Thank you!
Amazing Steampunk fidget spinner. Great for my next build.
you Are making The best FIDGET spinners
:))
Awesome!
this is the Best diy fidget spinner ever if i have moyen i will buy it from you
sami LIFE HACK u will spend 130$ on that I could make that for like 10$ at home!
Cutting the first part was so satisfying
I know some awesome guy... He is making all that amazing vintage and steampunk stuff...
Guess what, it´s you!
this is the most steam Punk'd fidget spinner and it's awesome
omg this is fidget spinner form yhe heaven 😩👌
Awesome and beautiful and I subscribed the channel
wow ! work of art .
Very inventive and creative, congrats...Cheers Sean
Thanks
Really beautiful work, bro!
Thanks!
Very nice spinner. Excellent
I like your fidget spinners
fantastic 👍👍👍
nice work dude
Awesome spinner.
waaauuuuu.....it's really cool and awesome
that's awesome!! nice job!!
Dude you have a beautiful mind. :)
Thats pretty cool!!!!!!!!!
Great video, beautiful spinner, nice work...
Thank you)
Very nice fidgetspinner
okay, this is way better than what I was expecting lol
good for u!
James Andonian you are bad at your job
wow!!!!
I loved!!!!
Thats really cool
Gorgeous!
That's rly good
finnaly something better than some bad kids project
Really creative
This is very good diy project this almost looks like i real fidget spinner
I like that 👍👍
im not into fidget spinners but thats pretty cool
oh my God what a fidget spinner ; )
5:00 I feel like that watch is cutting off your circulation
your awesome man
ما بقدر احكي عنك غير فنان👏👏👏👏👏
How did you get the smaller inside bearing to fit in the larger bearing without coming loose? I seen no solder or glue..
Also how did you get the copper ring to stick outside the larger bearing without coming loose? Again no glue or solder? Looks like you sprayed lubricant???
Is it just pressure fit?
Que belleza banjo show, saludos desde Chile
that's one antique fidget spinner
This is Art
bro looks sick wish they sold that but try to make the caps a bit smaller
Amazing! This item is already sold in your ETSY store. Will you be making more?
Due to the large number of orders, there is a delay in the production of spinners. Today or tomorrow I will put up for sale.
This was amazing
WOW I LIKE IT
WOW it,s my favourite
Dope video
Es. Increible👍
What are you spraying on the small bearing and the large ball bearings before pressing them into place? Is it something that chills them to shrink them to allow you to press them into place?
El Chick it's wd40
No this is a nitrogenous spray to reduce it in diameter
Banjo Show
Thanks! What is it called, and where do you get it?
@@BanjoShow how much does it shrink? So I commented a few minutes ago asking about how it fits. It expands when it warms up? This seems very complicated to measure the original fitting hole for bearing. What if we make the hole just a little to large...
Ok, how did you get the two knobs to screw together? Impossible, they are both threaded the same and you cut a piece of threaded rod from the supplied screw and used that.. Think about it. Everything else was really nice, good job on the build. Let me know about the knobs though. Was one reverse thread?
Best Damn Whatchcallit I've Seen > Truly A Piece of Art ! Enjoyed Watching It being Created > Thank You !
Perfect!!
Thank you my friend!
use unshielded ball bearings! makes a big difference
Why?
+Ron Butler less friction
James Andonian entierro demauel Enrique lazo
this is genius
Nice!!! High quality homemade!! #Iluvbanjoshow
Братуха, чем меньше диаметр подшипника , тем лучше. Меньше сопротивление , поэтому дольше вращается... Ну, это я так, вдруг ты не знал 😉
Как обычно, очень круто, но хочется чего то по маштабней😀
В скором времени выйдет новое видео про кальян думаю вам понравится ;)
Banjo Show это хорошо, буду ждать. Надеюсь проект будет очень интересным
very very good
cool fidget spiner
the spinner looks like some thing you can buy
Liiiit dope
MY NAMES BANJO!!! OMG 😲
Hello Banjo 😉
now that's a but feel I love it can you pease do more
what about where to buy the supplies
You good of the maker spinner
Awesone!!
Again the Greeks show the world how to do it right!
mann, ist das ding wunderschön !!! und danke für die arbeitstechniken.
Danke)
Bhaskar Rao
awesome show...
Bitta !
Lucian Caliman. !genial!
The ancient spinner!
Muy Buen Trabajo
You are superb mind-blowing awesome
awesome..😵
I DON'T MAKE IT BUT I LIKE
What's the average spin time on these ones?
Looks like mid ages weapon :) seriously, how heavy is it?
Spinner of gods
Will anymore of these be made?
вообще крутой, а некоторые на стяжках херачут, лайк
Спасибо)
what u putted for bearings
Awesomeness
Please tell me that what was that spray
What does the WD-40 do?
How can you do this type of project
You did get that dremel! +1
i made it this thx
bro
I did make it it so cool an d good and so smooth
what are you spraing on it
This is Freezer Spray I use it to reduce the items in size and They fit in their place.
amazing
Quantos VC cobra para fazer uma para mim de cobre....
good idea
Paramesrames Ramesh To
how can a purchase one of this?
Purchase link is in the description.
your metal lube, i want to know what is it
Keren banget coeee
Nice