THAT REALLY WAS A QUICK ONE, CAN'T WAIT TO SEE ANOTHER ONE OF YOUR CAN- COMMUNICATION VIDEOS, I END UP LEARNING SO MUCH LOVE TO SEE CAN DIAGNOSTICS FROM ANOTHER AUTOMOTIVE TECHNICIANS POINT OF VIEW THANKS FOR YOUR TIME !!!!
Good job. Probably the best advice for DIYers is to give it a shot yourself first, but don't start throwing money and parts at it if you're not sure what the problem is. I've thrown a few cheap parts at my cars in the past, mainly a €15 fusebox and a €10 accelerator module, and a fuel filter (which did turn out to be the problem). Sometimes it's worth throwing a part at the car to narrow down the problem, and it may even be worth it with something like glow (or spark) plugs since they're a consumable part anyway. My Peugeot dealer once tried to throw an ABS module at my car, for €850+labour, but I said "absolutely not", and I later figured out it was a dirty, blanked, EGR valve (the previous owner had reflashed the ECU to prevent an engine warning light so I didn't have any errors to follow). But I wouldn't be throwing a €150 module at the car unless I was really sure about it..
I like your videos and appreciate the time you spend making them. Can you please drop the background music from the videos? I think is better for everyone to hear your voice, than to hear the music. Thanks for sharing your knowledge.
it all deepens on he persons level of skill Garry as there may have been a dead short that killed the fuse . but all that matters is the customer is happy with the job
I find you videos are really interesting but as I am slightly hard of hearing, the background music is overriding your voice. Obviously me increasing the volume doesn't help.
I have replace abs unit for my car santa fe 2007, 2.7, 4WD, EPS, abs type s/w 60303 ver 0204. And bleed air from wheels. The problem. Is clunk sound Inside abs unit when press break at low speed. No signal abs light, the abs working good as break, the problem only the clunk sound. So please could you advice me how solve this problem. Thank you very much for your help.
THAT REALLY WAS A QUICK ONE, CAN'T WAIT TO SEE ANOTHER ONE OF YOUR CAN- COMMUNICATION VIDEOS, I END UP LEARNING SO MUCH LOVE TO SEE CAN DIAGNOSTICS FROM ANOTHER AUTOMOTIVE TECHNICIANS POINT OF VIEW THANKS FOR YOUR TIME !!!!
Good job. Probably the best advice for DIYers is to give it a shot yourself first, but don't start throwing money and parts at it if you're not sure what the problem is.
I've thrown a few cheap parts at my cars in the past, mainly a €15 fusebox and a €10 accelerator module, and a fuel filter (which did turn out to be the problem).
Sometimes it's worth throwing a part at the car to narrow down the problem, and it may even be worth it with something like glow (or spark) plugs since they're a consumable part anyway.
My Peugeot dealer once tried to throw an ABS module at my car, for €850+labour, but I said "absolutely not", and I later figured out it was a dirty, blanked, EGR valve (the previous owner had reflashed the ECU to prevent an engine warning light so I didn't have any errors to follow).
But I wouldn't be throwing a €150 module at the car unless I was really sure about it..
I like your videos and appreciate the time you spend making them. Can you please drop the background music from the videos? I think is better for everyone to hear your voice, than to hear the music. Thanks for sharing your knowledge.
Agreed! It was really hard to hear. And I also wish they use an appropriate mic as there's a lot of echo!
Great content being lost due to the audio.
Thanks Gary,, much appreciated,, 👌
in my experience, common rails never had a problem to start without glow plugs over 0° C 🤔 thanks for your videos!
Never seen it as well
Classy 👏🏻👏🏻👏🏻 excellent fault diagnosis there 👍🏻
it all deepens on he persons level of skill Garry as there may have been a dead short that killed the fuse . but all that matters is the customer is happy with the job
just found your videos good content thanks in my world fuse fairy normaly swaps them around in the fuse box
Must have been one of the more determined fuse fairy’s being it was a maxi fuse 😂
Good video but maybe drop the music so we can hear 👂 you lol 😎❤️
Xe nước bạn đẹp quá
It’s really hard to hear you which is a shame because of the knowledge you’re showing.
I find you videos are really interesting but as I am slightly hard of hearing, the background music is overriding your voice. Obviously me increasing the volume doesn't help.
I have replace abs unit for my car santa fe 2007, 2.7, 4WD, EPS, abs type s/w 60303 ver 0204. And bleed air from wheels. The problem. Is clunk sound Inside abs unit when press break at low speed. No signal abs light, the abs working good as break, the problem only the clunk sound. So please could you advice me how solve this problem.
Thank you very much for your help.
Mmm, wondering what happened to the original fuse……
The fuse fairy can be a tricky one! What data program are you using? Thanks for the video.
On that one I used Autodata
Does make you wonder why the previous owner took it out and didn't replace it.
Or put back in the wrong location?
Man after my own heart I need a small part to fix job it's in my pocket , problem is at weekend put clothes in wash oh dear 😳
where abouts are you ??....im ne3
Team Valley