Same. Just bought the 120 . Had it out a few times now and love it. I don't get water coming up through the scuppers, I think its just the 106 that will do that?
First person I've seen show the water in the bottom. Seems fine in the summer although fishing for 4+ hours with wet feet seems like it would get annoying.. but when its 40F out that would be bad... im usually wearing sneakers in my current kayak at those temps
Great video. I bought the same boat a year ago and definitely agree with the pros/cons you’ve mentioned. My biggest complaint is the water that gets in while standing and that waves will break over the bow if it’s very windy. You definitely will get a little wet when using this kayak haha. Overall though the kayak is excellent and in my opinion the pros 100% outweigh the cons. You did a great job showing anybody who is interested in buying one what to expect
Thanks! And yeah, completely agree. Every kayak is going to have some negatives but definitely feel like I got more than my money's worth with the Topwater.
Great review and excellent mods. I recently sold my Big Rig with the idea of buying a Topwater 120 PDL. I can't wait to get it and add some of your mods. Where did you get the jump seat? I was considering upgrading to the predator seat but your idea may be even better and more economical. Tight lines!
Thanks Mike! $35 from Academy Sports and Outdoors. Here is a link. www.academy.com/shop/pdp/marine-raider-low-back-boat-seat-112936840#repChildCatSku=112936858 A few things to know. It ships with some long screws already inserted into in the base of the seat. Be sure to remove them or yeah, it feels like you are sitting on two screws. Also, put some foam / thick duct tape over the metal brackets and over the screws on the back so it does not tear up your Topwater seat.
Thanks! Not usually. Sometimes when you get really big waves while you are traveling away from the wind but those are usually the times I question whether I should be out on the water or not.
Great. video. I just purchased the 120. I'm really interested in your kayak cart. Looks simple but effective. Can you post a video on how you made it? Thanks.
Thanks! I ordered the rod holder, screws, and gasket from Old Town customer service. I believe with shipping it was $10 or $15. Sorry, don't have a video on how I installed it. It is the normal rod holder just inserted in the other direction. Only thing to watch out for is rudder cables.
Enjoyed the review. Just ordered a Sportsmans 106 Paddle Model. Some of your tips will be helpful to me. Maybe consider the peddle model in a couple years. What type transport wheels are you using, they look lower than most that I have seen? Thanks
All good kayaks. The Predator is faster for sure but I think the Topwater/Sportsman is more stable. Have yet to hear of anyone turtling their Topwater but have heard of several doing it in their Predator. Good luck with your decision.
Great, informative video! Random question. How wide is tour cooler? I’ll be getting this kayak shortly and want to know how wide of a cooler I can put in the back. Thanks in advance!
Great video & meaningful mods. I got my Topwater 106 PDL last summer & have slowly been making mods myself. Installing a forward facing rod holder this weekend. What fish finder do you use & how do you have it connected? Thanks!
Thanks! I have a Garmin Echomap 93sv. I attached a piece of wood to the bottom of the Garmin mount then screwed and zip tied a scotty mount to that. I used the Hobie through hull wiring kit to run the cables into the hull.
I simple screwed it straight to the kayak with some stainless steel screws. The short sections of conduit are zip tied down to the front piece. with a small screw through the front edge of the pvc conduit down into the hdpe material to help keep them from sliding.
the biggest concern is transport I have a small pickup with cover I want a kayak with pedals I used to paddle a lot in Hawaii but due a injury pedal be better for me now. how heavy is the kayak, and can you raise the pedal drive so it can be transported easier?
Hey Tommy, it is easy to transport. The drive can be lifted up so it is above the bottom of the boat and it can be easily removed. It weighs about 15 lbs. The boat without the drive is around 75lbs. I car top it so would be even easier to transport with a pickup. Just set one end up on the tailgate lift the other end up and slide it into the bed. The most you are lifting is around 35 or 40lbs.
Question, I really like the seat idea but the seat you put unit has that aluminum frame with the hard corners in the back, don’t those corners tear the material in the original seat? Thanks
There are some close ups of it at the 9:00 minute mark. Just made out of 3/4" pvc tubing and elbows. Spray painted it all grey after building. The back section is simply screwed into the top of the kayak with some long stainless screws. The front piece is just 3/4" pvc tubing straped to a piece of 1/4 hdpe cutting board material. Used zip ties for that and a small flush screw at the front tip of each tube to keep it from slipping forward. Also heated the end that you put the rod tip into with a propane torch and flared it out some by pushing a socket extension that had a flared end on it. Hope that helps.
Quick question..(feel silly asking)...I purchased the replacement pedals you recommended. For the life of me, I can't figure out how to take the stock pedal shaft off and replace it with the new pedal shaft. Can you assist?
The right pedals loosen by turning counter-clockwise, left pedals loosen clockwise. There should be some UA-cam videos on replacing bicycle pedals. Threw me off at first to not thinking that the threads are different on the left and right pedal.
Sorry, don't have a video on just the rod holder. But if you If view the Topwater PDL 1 year review video on my channel it goes into the horizontal rod holders in a little more in depth.
It’s hands down one the best kayaks on the market, regardless of price range
One of the best videos I have seen regarding this kayak!
Thanks! I appreciate that!
I got the 2021 version pdl120 best kayak ever kinda heavy but once on water it's so stable I caught more fish casting lure and trolling
Excellent! Glad you are enjoying your new kayak. Tight lines!
Same. Just bought the 120 . Had it out a few times now and love it. I don't get water coming up through the scuppers, I think its just the 106 that will do that?
The nail polish bottle for scent is a great tip!
First person I've seen show the water in the bottom. Seems fine in the summer although fishing for 4+ hours with wet feet seems like it would get annoying.. but when its 40F out that would be bad... im usually wearing sneakers in my current kayak at those temps
Great video. I bought the same boat a year ago and definitely agree with the pros/cons you’ve mentioned. My biggest complaint is the water that gets in while standing and that waves will break over the bow if it’s very windy. You definitely will get a little wet when using this kayak haha. Overall though the kayak is excellent and in my opinion the pros 100% outweigh the cons. You did a great job showing anybody who is interested in buying one what to expect
Thanks! And yeah, completely agree. Every kayak is going to have some negatives but definitely feel like I got more than my money's worth with the Topwater.
Good job. Many clever solutions🤙
Nice review. I plan to buy the more padded predator seat when I purchase a Topwater PDL this year.
Great review well done loved it 👍🏼
very informative review. deciding between this and a native
Nice video. Do you plan to do a video on the rod holder? I fish a lot of creeks and small rivers and need a rod holder that doesn't stickup.
Great video. Love the idea about the jump seat and will be looking into that. definitely cheaper than ordering the Predator seat.
Thanks! And yeah if you go the jump seat route just be sure to pad the bottom of the jump seat so it does not tear up your Topwater seat.
Great review and excellent mods. I recently sold my Big Rig with the idea of buying a Topwater 120 PDL. I can't wait to get it and add some of your mods. Where did you get the jump seat? I was considering upgrading to the predator seat but your idea may be even better and more economical. Tight lines!
Thanks Mike! $35 from Academy Sports and Outdoors. Here is a link. www.academy.com/shop/pdp/marine-raider-low-back-boat-seat-112936840#repChildCatSku=112936858 A few things to know. It ships with some long screws already inserted into in the base of the seat. Be sure to remove them or yeah, it feels like you are sitting on two screws. Also, put some foam / thick duct tape over the metal brackets and over the screws on the back so it does not tear up your Topwater seat.
I really enjoy your review, very for informative. Do you ever feel unstable with big wave or side wave created by boat?
Thanks! Not usually. Sometimes when you get really big waves while you are traveling away from the wind but those are usually the times I question whether I should be out on the water or not.
Great. video. I just purchased the 120. I'm really interested in your kayak cart. Looks simple but effective. Can you post a video on how you made it? Thanks.
Disregard. I just found your video. lol. Tight lines.
Great review and tips!!
Great review. Thanks for sharing it with us. Where did you get front facing the rod holder? Do you have a video of the installation?
Thanks! I ordered the rod holder, screws, and gasket from Old Town customer service. I believe with shipping it was $10 or $15. Sorry, don't have a video on how I installed it. It is the normal rod holder just inserted in the other direction. Only thing to watch out for is rudder cables.
Great review
Do you have a video of how you made the horizontal rod holder
Enjoyed the review. Just ordered a Sportsmans 106 Paddle Model. Some of your tips will be helpful to me.
Maybe consider the peddle model in a couple years. What type transport wheels are you using, they look lower than most that I have seen?
Thanks
I guess I should have looked at all your videos I see you have answer to my transport question.
@@dansingletary7891 LOL. Was just going to respond! Glad I could help. Enjoy your new boat. Old Town did a nice job with them.
Great review. Thinking of this kayak or predator. Your video has me leaning more towards the top water/sportsman.
All good kayaks. The Predator is faster for sure but I think the Topwater/Sportsman is more stable. Have yet to hear of anyone turtling their Topwater but have heard of several doing it in their Predator. Good luck with your decision.
Great, informative video! Random question. How wide is tour cooler? I’ll be getting this kayak shortly and want to know how wide of a cooler I can put in the back. Thanks in advance!
AWESOME
Thanks!
I am torn between the 12 and 10 foot. why would I go 10 over 12 and vice versa
Great video & meaningful mods. I got my Topwater 106 PDL last summer & have slowly been making mods myself. Installing a forward facing rod holder this weekend. What fish finder do you use & how do you have it connected?
Thanks!
Thanks! I have a Garmin Echomap 93sv. I attached a piece of wood to the bottom of the Garmin mount then screwed and zip tied a scotty mount to that. I used the Hobie through hull wiring kit to run the cables into the hull.
Maic a video on the rod holders on the said of your kayak
If you view the Topwater PDL 1 year review video on my channel it goes into the horizontal rod holders a little more in depth.
I would like to see how you added your rod holder, because i would like to make it!
I simple screwed it straight to the kayak with some stainless steel screws. The short sections of conduit are zip tied down to the front piece. with a small screw through the front edge of the pvc conduit down into the hdpe material to help keep them from sliding.
I’m looking at getting this boat. Is there a way you could rig a bow mount trolling motor?
the biggest concern is transport I have a small pickup with cover I want a kayak with pedals I used to paddle a lot in Hawaii but due a injury pedal be better for me now. how heavy is the kayak, and can you raise the pedal drive so it can be transported easier?
Hey Tommy, it is easy to transport. The drive can be lifted up so it is above the bottom of the boat and it can be easily removed. It weighs about 15 lbs. The boat without the drive is around 75lbs. I car top it so would be even easier to transport with a pickup. Just set one end up on the tailgate lift the other end up and slide it into the bed. The most you are lifting is around 35 or 40lbs.
Question, I really like the seat idea but the seat you put unit has that aluminum frame with the hard corners in the back, don’t those corners tear the material in the original seat?
Thanks
Oh I just noticed you put something there to keep it from doing that, I was gonna say the seats with the plastic frame might work also.
I have more padding that I put between the topwater seat and the boat seat to prevent this.
Any info on how to build the horizontal pole
There are some close ups of it at the 9:00 minute mark. Just made out of 3/4" pvc tubing and elbows. Spray painted it all grey after building. The back section is simply screwed into the top of the kayak with some long stainless screws. The front piece is just 3/4" pvc tubing straped to a piece of 1/4 hdpe cutting board material. Used zip ties for that and a small flush screw at the front tip of each tube to keep it from slipping forward. Also heated the end that you put the rod tip into with a propane torch and flared it out some by pushing a socket extension that had a flared end on it. Hope that helps.
Quick question..(feel silly asking)...I purchased the replacement pedals you recommended. For the life of me, I can't figure out how to take the stock pedal shaft off and replace it with the new pedal shaft. Can you assist?
The right pedals loosen by turning counter-clockwise, left pedals loosen clockwise. There should be some UA-cam videos on replacing bicycle pedals. Threw me off at first to not thinking that the threads are different on the left and right pedal.
nice kayak! how much for one? now
Thank you
Do you have a video for this horizontal rod holder, I can't find it if you do
Sorry, don't have a video on just the rod holder. But if you If view the Topwater PDL 1 year review video on my channel it goes into the horizontal rod holders in a little more in depth.
@@kayakfishingworks1304 the design looks simple enough but just can't tell for sure the attachment method on rear portion
@@toddduffell5211 Simply used a few stainless screws to screw it directly to the body of the kayak.
I didn’t see you put the rod completely in the yak.
In my initial review of this boat I slid a 7'6" cranking ride completely inside.
@@kayakfishingworks1304
OK, I didn’t get to see it so thanks for letting me know.
How stable is the kayak for fishing standing up?
This is a super stable kayak. I stand and fish in it all of the time. I feel that I would fall off of it before it ever rolled.
Nice hacks!