EASILY Fix A Bent Crankshaft On An Engine
Вставка
- Опубліковано 6 лип 2024
- Taryl's 2018 Halloween Extravaganza begins with "A Haunting In Podunk". Taryl inherits a haunted old part and bad things begin happening around the shop. After the intro and before the ending, Taryl goes over how to properly fix a bent crankshaft on a small engine. Hit something in the yard with the push mower and now it's vibrating? We gotcha covered. Taryl goes over a couple different methods on how to straighten the crank as well as what else to look for when you hit something. Another fun and educational how-to video from your pals at Grass Rats Garage! And as always, There's Your Dinner!!
Be sure to pick up some Taryl Apparel here! Shipping Worldwide Daily.
www.tarylfixesall.bigcartel.com
Follow the gang on Facebook & Instagram too! @tarylfixesall
/ tarylfixesall
/ tarylfixesall
Subscribe to the channel and be on the look out for a brand new how-to video every Sunday morning @ 9 am Central! - Навчання та стиль
Pick Up YOUR Taryl Apparel Today! (T-Shirts, Mugs and More!)
www.TARYLFIXESALL.BIGCARTEL.com
Perfect for the GRASS RAT in YOUR life! Now There's Yur Dinner!!
T x vrg
"that jumped off of push rod"? I had one and adjusted valves, 2nd time they ran the machine it slung the rod and almost got someone hurt standing near it! A hole the size of a cross cut 2x4!
Did I do something wrong? Set valve lash according to Honda!
I'm sorry, "NOW, Theres Your Dinner"
You're the best guys!
"A gold nugget"?
Or a "butt nugget"?
🤔
I retired from the military and was inspired to start a small engine repair business thanks to Taryl. It’s going great. People are happy with my work and I’m happy to still be serving others.
Taryl is one of my heroes.
The man is a wealth of knowledge and positivity.
That's awesome brother. Same here now just waiting on the state to process my paperwork. I'm tired of getting the shaft working for the man. Hope business is going well any hip pocket tips?
My Dad mowed the yard up until 1969 and 1970 during this period he taught me how to fix the old 3 and a half horse power Briggs and Stratton 22 inch push mower. Like hammering the shaft back straight and replacing the key after I hit something. By 1970 I was 11 years old and was given the yard mowing forever ! LOL ! Love all your vids Taryl very humorous ,entertaining and educational.
I found a perfect like new engine on a power washer and tried using it on my mower. It worked great except not only when I hit something did it get the timing all screwed up because it had the pointless lgnition, but I found the shaft to bend at the drop of a hat because it was not made as strong as lawn mower crankshaft .
Wife heard video in the background and says, "what in the hell are you watchin!?"
FredFlintstone21 😂😂😂
I would have said..."Dear its an edimicational video"
wilma said what?
@@ultrakool she said, "Dinner time Fred!"
😭😭
Being a video creator myself I know the time and effort that's goes into making videos. You guys keep up the good work!
Taryl your videos are awesome I don’t even have lawn equipment that needs fixing but your videos are entertaining and it’s awesome you get to do this with your son! I wish you all the best in life for all the free dinners you give away and laughter for the souls good luck bro
Still laughing about the mower from the nudist colony. Funny as hell.
Lotta bent cranks there lol.😄
Once again another great video. I'm definitely going to order those sleeves. I really could not justify buying that jig that you used. In the last 15 years I've only had one bent crankshaft and that was one my own mower. The mower was about a month and a half old when my wife did not listen and went out into the yard and tried to mow over top of their decorative rocks that made a pass to the garage. 2 weeks before she bent the shaft she took out the lawn mower blade. And two weeks later she took out the motor. Fortunately I had a good used motor on someone's mower deck that could not be saved. So I have a lawn mower with a brand new body with a 20-year old motor.
Like always I enjoyed your video.
Taryl is a Genius when it comes to keeping the dirty jokes clean and still being able to get his point a cross LMAO.
truuueeeee
I used the hammer method today to successfully straighten a crankshaft on a Honda push mower! Thank you, Taryl!! Also, congratulations to your camera person, who does an outstanding job.
I've been working on small engines for fun my entire life, I never knew a tool existed to straighten cranks, I've always just replaced them learn something every day.
In truth the device does not "straighten cranks", is straightens the output shaft of the engine.
Yes the output shaft is physically connected as an extension of the crankshaft, however, the output shaft is an extension listed separately on most parts breakdown lists.
Most engines, with the exception of the small engine such as we are discussing, do not have an output shaft, but rather usually have an output flange of some type.
News Now Riverside Sgt Rock in truth there is always a stick in the mud
This is better than TV - Theres an Oscar out there for you guys, and so educational - real world stuff too, Hammers the works. Love it Mr Dactyl
I always look forward to the Halloween videos you guys make. They are some of my favorites!
One of the best vids on this site. I’ve scrapped bunches of engines before I learned this trick. I found a really long blade adapter at the scrap yard, and have straightened several cranks now. You da man Taryl 🤟🤟
Picked up a free mower to get it running. Cleaned carbs and changed gas and oil and it fired up but vibrated violently. I learned in this vid how to check the crank and how to straighten it. I banged so hard with the sledge that it tore out the motor mounts. Gave me a good reason to buy a welder and I welded new steel to the deck and made new solid mounts. After a little spray paint I now have a pretty sweet mower! You guys rock!
Thanks Taryl and crew, great stuff. I needed my "Taryl" fix
All the small engine repair vedios are generally informative however Taryl your vedios are the best!!!Best in all categories 2nd vedio I watched won't be the last!!!
The most entertaining media on the INTERNET. You guys are FABULOUS!
Can't stop watching your videos
Hi Taryl. Our small engine teacher in high school never showed us this tool. I watch your videos to learn more than I ever did
in high school shop. oh maybe because I was out riding my dirt bike? and chasing girls. Lee from gretna nebraska again.
you are the best small engine video on you tube. Thanks
I'm subscribing after this I've been fixing stuff for 45 years and worked in Sears service and still learned lots
Taryl I had small engine class in high school and thats how the shop teacher showed us, the same way you remove the flywheel. And thats how I still remove a flywheel, hammer & pry bar. Thanks for all the info you share and great videos.
Great video, I’ve never seen that done before 👍👍👍
You can use a dial indicator to actually show how much the shaft is bent. If enough time is spent the shaft can be bent back perfect
A Podunk Poltergiest!! Thanks for the great vids! 🍺🍺
Great video, I don't own a lawnmower yet enjoy seeing small engines worked on
I LOVE THE FUNNY EPISODES ON THIS VIDEO. I LOVE THE PARANORMAL. GREAT SKITS ON THIS ONE TARYL.
NOW I JUST GOT TO GO BACK AND WATCH THE REST. LOL..
Another fine Podunk Production, Thanks
I'm learning so much,I might not ever use everything I've learned but its always good to learn stuff. And there your dinner!
YES!!!!! Education and Entertainment by Taryl!!!!!
These videos are solid country gold !!
Thanks for another funny and informative video Taryl. The wife and I both enjoy them.
Love your videos. Very informative and entertaining.
Glad I got to see the crankshaft straightening machine in use. Love the Halloween time skits too. Thanks boys!
I watch a crapload of utube videos for some time and hands down you are the best you are funny but you are a pro. I own a small engine repair shop in the Napa Valley Calif and repair a load of equipment. I prefer 4 cycle but do it all.Thanks and keep up the good work.
It is a amazingly nice change of pace to be able to watch someone with real knowledge that fixes things correctly I've watched videos upon videos of people doing things wrong telling people its right. Keep up the great work!!!
Dude your videos are the best! I watch just for entertainment and then a bonus I get to learn...
love your videos. keep up the awesome work.
J's small engine repair
Taryl… Your videos are not only entertaining but very clear in visual demonstration. Thanks camera guy! You also make your points easily understood and even included safely tips like them boys usta doo at Ford…Safety Is Job #1 Anyhoo… You r my “Go To” guy when I need to be working on my Scrub Cadet V-twin LT-1024 machine. I learnt how to rebuild my carbonator, PTO walrus…I mean seal.. and lots of other snappy things. Thanks brosky. You’ve saved me a lot of shiny nickles fixin’ this jewelster! Keep ‘em rolling and I’ll have me sum Taryl apparel yet! I’ll then bee bragging’ on you!
Steve from Annapolis Maryland keep up the good work it's nice to see somebody that takes the time to save someone a lot of money and has although wonderful tools that nobody cares a use anymore you got my vote keep up the good work
Another great video! Humor that is right up my alley.
Thank you for another entertaining video.
DON'T KNOW HOW YOU DO IT. BUT MAN ARE YOU GOOD LOVE YOUR VIDS. THANK YOU.
Used the sleeve and magnet method with a Craftsman w/ Briggs engine. Used a socket instead of buying sleeves. Not the space shuttle remember? Worked perfectly. No more excessive vibrations. Thanks so much for the videos!
Thanks for the tip.
@@deanguando1335 what size socket did you use? Would wrapping old leather belt around the shaft be effective if I can’t source a sleeve? Thanks shaft on my 6.5 Tecumseh lawnboy.
Great Video
That Ronnie deserves more than a Haunting. Much more!!!
Outstanding video.
Another Great Video... Thx ... i had a brand new mower and got it at Sears and i hit a small stump and it was bent so bad it would not start... i took it back to sears repair shop in San Diego and told them what happen and they repaired it in two days and said no CHARGE... i love Sears...
Great job guys thanks
My dad taught me and my brothers how to straighten a crankshaft with a hammer like that 40 YEARS ago, and how to get the flywheel off that way too. SOME PEOPLE CRINGE ON THAT,BUT LIKE A LOT OF THINGS I'VE SEEN YOU DO I'VE DONE AS WELL SINCE I WAS AROUND 12 YEARS OLD! AS YOU STATE A LOT OF TIMES,, IT'S NOT THE SPACE SHUTTLE!! things on small engines are not that CRITICAL!! I'm glad you're doing these videos! MAINLY TO SHOW ALL THOSE BY THE BOOK "PROFESSIONALS" that you DON'T NECESSARILY HAVE TO HAVE TONS OF MONEY INVESTED IN ALL THOSE FANCY TOOLS JUST TO WORK ON THINGS!! MANY OF TIMES I'VE USED A DRILL AND A FILE TO TRUE UP A VALVE, I'VE ALSO USED THE SANDPAPER TRICK ON THE SEATS, a lot of the bolts and such DOESN'T HAVE TO BE "TORQUED" yes the head bolts,yes the rod bolts,but some of the other bolts just snugged up,does just fine!!
Taryl you are a very clever mechanic !
That was a greaat DINNER!! Thanks
I have been binge watching your videos for a few days now and I"M IN TEARS LMAO when you intentionally hit something to bend the crankshaft!!!!!!!!
Taryl your videos always make me laugh....and the repairs Aint bad either
Thanks Daryl, fixed lawnmower cuz of your show. Can u do a show comparing 2 machines side by side, pros and cons? Keep up the good e pisodes😉
I thought Ronnie was still banned! Great video! Can’t wait for next week new video!
Taryl yours and al blades channels are the only one i watch the vids to the end no matter the length 💯👍
Great Video! Looking forward to watching the GIE video. Great job on repairing the time waster....
Wiss said vary funny. Thanks for showing us the way to get them straight up .good class .
I like this there should be a part 2.
T....you are nuthin short of AMAZIN!!!!!
that is pretty cool taryl--yeaaaa.
i have neverr seen anything like that--prettyyy cool
Fantastic work! Thank you
Great video as always, Taryl
Excellent Taryl. Thank you.
another great video , thank you guys
Nothing like Quality Parts from your local Wisconsin engine dealer...🏃💨___👻🎃💀(Taryl and Junior doing the"TWO STROKE"🏃💨)HAHAHA!!.
Got a bolen mower with a 4hp briggs out the dumpster at work. Looked to be pretty nice compared to my old turd. I ordered a 16 dollar china carb , filter and spark plug kit. Put it all on and fired it up. It shook like crazy and i immediately knew it was bent. About 20 mins in after your video and its a lot better.gonna try a lil more. Thanks for the video sir.
I hit something with my push (self propelled) mower and threw out the timing. Like you said it would yank the starter rope out of my hand when I tried to start it ! Also when it kicked back it would spin the bolt loose that holds the blade on and the blade would fall off! I removed the flywheel like you did ( before I saw this video) and was hoping nobody saw me and yell at me for not getting a puller. Lol. I was pleased that you have been doing it that way for years with no issues. When I started watching your videos, I said to myself who is this crazy guy?! But I couldn’t stop watching! Lol. You really know your stuff and make it interesting and enjoyable to watch. Thanks.
thanks again for all the great info very helpfull
Hey Taryl, I'm a washed up actor thinking of getting into small engine repair, got any openings?
You, sir, done made a hilarious and informative vid at the same time- haw!
I should try your first method on a few people, straighten them right out.
KEEP THEM COMING BOYS GOOD STUFF
There was a reason i watched this but i never expected this one to turn into a comedy show…bent cranks that you can’t yank….dear God in heaven i forgot why i even watched this…
You're a god of comedy!
Got an extra machine in our shop with a bent shaft. Now I know how to fix it. Thanks.
Good job TARYL that littke bit of a sheer on tgat pin will definatly make it off time
just ran up on your videos liked it so much i subscribed your a kool dude keep up the great videos
Great video Taryl!
"They're hittin' stuff all the time over there."
Too funny.
I'm too scared to go outside after this...AND, it's the middle of the morning. Need to see how it got Ronnie.
Thanks Tarryl👍
OMG - Funny as hell man! informative too. Love your work.
I tried your fly wheel removal method it works great
an amazing tool, good for you taryl
Excellent video I need this tool.
One tip I use on the crankshaft machine, I take a sharpie and make a mark on the sleeve, so I can tell if I over corrected the crankshaft. I ran into that issue when I first started doing them. Hope to see you at GIE this week.
well I bent the crankshaft on my mower thought I would have to tear it down . But after watching this video I un bent it myself. the mower runs like new again . Love your videos and am going to rebuild my craftsman riding mower .
When you passed that part on the sheyster in the end of the video, it probably would be nice to him since "birds of a feather" and all. lol
Great video! You make very interesting videos
Love the backyard garage humor,
And I mean no disrespect at all. I really laugh my ass off youre funny as he'll and get the job done and done right by any standard
Shane A Chelsea Maine
Well this proves the shaft keyway uselessness of this size. Thanks for the vids, you guys are a hoot.
Great video guys!👍
Dial indicators with magnetic base are about $30 at harbor freight. It will tell you exactly how far the crank is out to .001”. Also I would mark the heigh spot so I get a feel as to how hard I have to hit it to move it a certain amount. Your method is kind of hit and miss but it is effective.
I appreciate all of the videos that Taryl has made and he does a good job on them. The only thing I would change is the background music which is is the same on all of them. Even though it is low after watching serval videos the music gets old. I would just leave the music out except for special effects and then put in whatever music fits.
My thoughts exactly. 👍
Thanks, Man for showing how to on mower have two that shake like Medusa. Will order sleeves and getter done
Ustedes si que saben como hacer un buen video.
Informativo y gracioso.
That’s great information!! The crankshaft straightening machine is awesome. I have to get one! The only thing is, is I’m super nuts in the head with things being perfect. I’d have to get that shaft you did on the machine it perfect. If I didn’t it’d bother me big time.. 🤣😂
Great video.
Use the same technique on your teeth. It straightens your hair at the same time.
Good, instructive video. Who knew that there was such a thing as a crankshaft straightening sleeve?
nice video gang!