GMC C5500 BRAKE ROTOR AND CALIPER REPLACEMENT HOW TO!!
Вставка
- Опубліковано 14 жов 2024
- Hey guys today I am working on a GMC C5500 and I will be changing the brake rotor and caliper I hope I can help you when you watch the video and what your doing thanks and if you can subscribe to help me out I would really appreciate it thanks have a bless day #brake #rotor #caliper
Bro, you just shed plenty of light on this process for me. Thank you!
No problem thanks for the feedback have a blessed one
Having problems finding a new brake hub were did you find one awesome video thanks
Sorry for taking so long to respond but most of the parts I got from Napa auto parts did ofto oder some..and thanks
A respectable job .
Did you replace the oil seal in the hub and the axle flange gasket ?
The spindle bearing nut procedure is “77 ft lbs while turning the hub and bearings then back off the nut 90 degrees and retorque to 18 ft lbs “
And did you put any gear oil in the hub before you reinstalled it ?
I do believe that those specs are for Greased Bearings which are on my front 4X4 . Someone did post the specs for oiled bearings/rear.
I had trouble with my fronts did those several times then just increased the torque on them until they stopped backing off. One side did need a new ratcheting nut??? that was it was called?sorry have forgot right now.
I was going to comment on this. It has to be seated then backed off.
I had marked mine with the white steel markers, using two crescents to lift and guide the axle in that last 3 inches.
Sorry where is your new driveshaft seal. Should be cleaned as well if your going to use RTV. Which Should work as well.
As well should use brake clean on that new one.
I did do the one man brake bleed method. With a 2 liter pop bottle (washed it out right away with water let it dry for a week ) Put 2something inches of brake oil and then bled them into the bottle worked well. Do pump most of the oil out of the chamber before starting so that new oil will not be wasted mixing with the old oil.
I put the old seal couldn’t get the new one till a few days after we need the truck and the road
👍👍👍👍👍good job
Thanks 🙏🏾
Hi there, I have a Kodiak C45400 and I'm having trouble getting the main axle out. I see you use a hammer to knock it loose. I've beaten mine and it still won't come loose. what would you recommend?
You would of to hammer it real hard like your going to break it .get a big hammer if you need to because mine was really hard to get off I just keep hitting it. because it might have some lock around the nut that needs to come loose hope I could help.have a blessed one
Hello, Just curious, Was the rotor damaged, like cracked or warped? When you need just to replace and put NEW brake pads on, do you still need to replace the rotor?
Mine still looks great. I have a 2005 Chevrolet c5500 Kodiak 8.1 Vortec, on a Motorhome chassis.
Thanks!
If it looks good you don’t have to charge it you can just charge the brake pad mine was bad it’s a lot of work to get the rotor so if you don’t ofto just leave it have a blessed one how it’s all work out good for you
So I have a 2008 gmc 5500, What is the tourque sequence i have the same style nut as you have in this video. Someone said 77 ft lbs then back of 90 then tourqe down to 18 ft lbs. is That correct??
Sorry don’t remember it’s was like a year ago but it’s somewhere around 80 to 90 I did
Wat size socket did u use for the brake caliper
Sorry I forgot
WHAT TOOL # IS THE PULLER? I BOUGHT 1 BUT THE "CLAWS" AARE TOO THICK TO GET IN THERE.
It don’t have a size and the one I used and it was too small but I make it work sorry I couldn’t help
@@karlonarcher7918 a friend came over with a heel bar that worked pretty good.
How many qt does the rear take gear oil
Not sure I didn’t take all of it out only take like one qt out for what I was doing
The manual says 7 Qts. Didn't take that much just fill it to the filler bolt on the diff.
Где можно купить суппорт, колодки и диск тормозной?
Mine are NOT going to rust into where they were I kopper Koted the H*** out of them so no more rust????
any chance you have the part number?
No, but I got it from Napa if that help
That is NOT Fair! Yours came off easily!
I really had to work at mine, replaced a baggie of them???10 of the cone ??whatevertheyare called???
It was work for me too
Terrible music, thank you for the information tho.
Anytime 👍
I don't know about this guy , he ain't working on my truck
No problem good to know have a blessed one 🙏🏾
he never worked on trucks