This model looks so damn good! One thing I love about your videos is that you share the paints (by showing the actual bottle) you use. Thanks, Brent. Your videos rock, my dude!
Came here to be angry about this video claiming to paint models in 20 minutes. Figured out it was instead about painting models for 20 minutes. Great job!
of course zoomers are angry, when are you never complaining? (especially westerners) can you even hear yourselves? youtube was originally a website to upload free random stuff like cat videos, its FREE videos, no one owes you anything yet you have to leave angry comments because they don't meet YOUR specific opinions/ideology, jump into the video, watch, if its not your thing leave, whocares what it claims or not claims what the title states, "how DARE this doesn't mean my expectations" (as you insult a random stranger) typical westerner, its like instagram, if there's cute animals jumping a rope, you people have to say its animal abuse (face palm)
Absolutely love it! I stubbled across your channel after getting my first 3d printing and looking for inspiration on painting plague-infested skin in large figures. Love the words and the painting still looking for the plague-infested skin but your pinkly might just be where I need to start. Thanks
Excellent, as usual, sir. You have a way with gore that keeps it from being over-bearing and yet expresses the violence of the character perfectly. Thank you for sharing!
That model looks badass! What a masterpiece! I’m just getting into 3d printing and I never really painted models before it seems really overwhelming for me.
It is such a privilege to watch a master practice their craft. Your video showed up in my YT recommendations and I am so glad it did. Liked and subscribed. I am transitioning to the world of retirement and was thinking about what comes next. I have several statues and figures, but they are all bought. The idea of creating my own and then developing them through the painting process is very compelling. I will watch all your videos and learn all that I can. Thank you for sharing your passion and your creations.
MIG 191, MIG 194, MIG 195, one of these three would be my guess, probably the 195 yet the three colors are almost identical when painted on. A good tip is when you buy paints, either write down their ID numbers in a notepad or simply categorize them with photos. I label my paints holder with their model numbers on each paint holder slot to avoid these situations. Great job, as always, love the work. Your the only YT painter that I can sit through the entire video without skipping, etc. Your my fav model painter and I love all your vids.
Thanks for the tutorial, especially the use of colors for the skintone is very interesting. I also love the models from CA 3D studio. Can anyone tell me if they are presupported? Can't find anything about supports on their website.
damn, i really need to learn this way of painting, my painting of sculptures always ends up like a mess. You got yourself a new subscriber. Keep it coming buddy, i love it.
Interesting choices on the flesh tones! I never would have tried that combination on my own and I didn’t think it was looking quite right while you were building it up but the end results are amazing. That model looks absolutely fantastic and makes me want to take a crack at doing a Red Sonja.
Absolutely love these videos. Your techniques are simple yet have beautiful results. Finding Groundeffected and CA 3D studios has been a game changer in modelling. I can't wait to unlock ALL of the models that CA 3D studios has available to supporters. There are so many and they are all exquisite!!! Thank you all for the great content! On a side note, it is interesting to see so many paints and washes that I already use for armor modelling such as the ammo metal and tamiya wash. Quick tip on the wash, it is an enamel so if you do happen to get it somewhere you don't want, some enamel thinner will clean it up without ruining the acrylic paints underneath! Mud splatter techniques used in armor modelling would also work well for blood splatters. Add some paint to the brush, dab excess off, then use a toothpick to pull the bristles back and let them fling onto the model.
Great job you did there, congrats! By the way, I don't know if you mentioned it before but I would like to know what brand/model of airbrush and compressor you use. Thanks
Another get model! Do you cure your parts just a bit? Easier to remove supports and other little imperfections and give the parts a complete cure after?
I remove supports and usually any bits I can see with gloves then I cure for a short time and then clean up the parts and then cure them again after brushing with alcohol because I don’t want any little bits in my paint or on the surface. It’s a long job but it’s worth it
Um usually do like a 3 min cure then I prep them and then a 5 min. It’s gonna depend on your curing machine though cos they don’t all produce the same intensity of light
I just bought a 6th scale April O' Neil figure from someone and I was wondering how long does it take to print something like that? This is a custom figure that will also be painted
I don’t know anything about 3d printer but love your work my question is where do you buy the blueprints to make the se action figures ? Is there many website for this or people selling them
At 11:13, I am pretty sure you are using, Ammo's METALLIC Silver A.MIG-0195, pretty sure of it as their metallic steel MIG-191 looks not that silvery...Pretty sure that it's their silver. Hope that helps. They only have matt aluminum, which could also be it, but then again, it looks pretty silvery to me.
I use a old toothbrush for splatter, drawing my finger over it. I use it for mud on vehicles (sometimes mixed with baking powder for thickness) or thinned black for oil drippings. I also did it for the spots on bamboo trees. It can be used for the small spatters of blood too.
hi, can you tell me the name of the knife you used for the scratch model? no matter how much I looked, I found model scalpels with a thin blade everywhere
Bro I just wanted to paint a low poly cloud strife statue, came here for tips, and just got completely side tracked watching the whole thing. Incredible work!
So Glad I stumbled on your channel. Model kit builder as a kid and wanted to get back into the hobby. WoW! STL Resin Printing is ... AMAZING!! Just got my first printer station Mars Ultra and I'm having Fun Fun Fun learning all of this. Hope to be as good as you one day a goal to strive for. Your talent is inspiring, Thanks for sharing.
Love CA 3D, as soon as I joined, I suggested a Cyberpunk Ciri in the Discord, and now we're getting one!! Great work on Red Sonja, she's one of my favourite characters.
Incredible, I had to pause the video in many places to take in all the detail, that chaotic blood spatter made all the difference. Another inspirational classic, thank you (and thank you).
@groundeffected I'm looking to get a Elegoo Mars 5 Ultra and am wondering if it's too small of a 3D printer to do these types of prints. Build size is 153.36 x 77.76 x 165 mm³, is this enough or should I look at getting something bigger?
This model looks so damn good! One thing I love about your videos is that you share the paints (by showing the actual bottle) you use. Thanks, Brent. Your videos rock, my dude!
Came here to be angry about this video claiming to paint models in 20 minutes. Figured out it was instead about painting models for 20 minutes. Great job!
I was angry too!!😡 but yes, I love his painting technique!!
of course zoomers are angry, when are you never complaining? (especially westerners) can you even hear yourselves? youtube was originally a website to upload free random stuff like cat videos, its FREE videos, no one owes you anything yet you have to leave angry comments because they don't meet YOUR specific opinions/ideology, jump into the video, watch, if its not your thing leave, whocares what it claims or not claims what the title states, "how DARE this doesn't mean my expectations" (as you insult a random stranger) typical westerner, its like instagram, if there's cute animals jumping a rope, you people have to say its animal abuse (face palm)
Hulk. What size brush to paint eyes? Where to get it from? What kind of airbrush and paint tip please?
02 for eyes iwata airbrush 0.4 tip
Absolutely love it! I stubbled across your channel after getting my first 3d printing and looking for inspiration on painting plague-infested skin in large figures. Love the words and the painting still looking for the plague-infested skin but your pinkly might just be where I need to start. Thanks
Excellent, as usual, sir. You have a way with gore that keeps it from being over-bearing and yet expresses the violence of the character perfectly. Thank you for sharing!
Excellent, you knocked the eyes out of the park. Love this model and great job. thanks again
Glad you like it!
May I make a panel line painting on my own? In my country it does not exist :(
Yea just use white spirit and oil paint it’s very similar
Love to know the settings for the GKtwo
That model looks badass! What a masterpiece! I’m just getting into 3d printing and I never really painted models before it seems really overwhelming for me.
It is such a privilege to watch a master practice their craft.
Your video showed up in my YT recommendations and I am so glad it did. Liked and subscribed. I am transitioning to the world of retirement and was thinking about what comes next. I have several statues and figures, but they are all bought. The idea of creating my own and then developing them through the painting process is very compelling. I will watch all your videos and learn all that I can.
Thank you for sharing your passion and your creations.
MIG 191, MIG 194, MIG 195, one of these three would be my guess, probably the 195 yet the three colors are almost identical when painted on.
A good tip is when you buy paints, either write down their ID numbers in a notepad or simply categorize them with photos.
I label my paints holder with their model numbers on each paint holder slot to avoid these situations.
Great job, as always, love the work. Your the only YT painter that I can sit through the entire video without skipping, etc. Your my fav model painter and I love all your vids.
Those flesh tones and the boots are cool. Nice looking model man.
Just finding your channel, I got a Saturn 3 ultra. I hope I can get some nice prints out of it. Your paint work is amazing!
excellent Idea with the blood splatter love your work
best Red Sonja I have seen so far, and the the Gold thingy is a shield.
Was about to go searching for a video like this, and there it is sitting right in my home feed.
By far MY FAVORITE!!! Love this Character!!! Makes me really want a 3D printer now!!!
I don’t remember any of the movies but I read some comics when I was younger I mostly remember the covers!
Thanks for the tutorial, especially the use of colors for the skintone is very interesting. I also love the models from CA 3D studio. Can anyone tell me if they are presupported? Can't find anything about supports on their website.
They are presupported in 1/12th or something. They aren’t supported in 1/6th
thank you very much! @@Groundeffected
2:38 do i hear jort storm in the background?
Dude I changed to using the Chaos Black spray and the difference between that primer and the other ones is so notable.
It’s so good. Just make sure to shake it well and it should treat you right.
I'm just starting airbrushing but I hope one day i'll half as good as you. That's just amazing
damn, i really need to learn this way of painting, my painting of sculptures always ends up like a mess. You got yourself a new subscriber. Keep it coming buddy, i love it.
Interesting choices on the flesh tones! I never would have tried that combination on my own and I didn’t think it was looking quite right while you were building it up but the end results are amazing. That model looks absolutely fantastic and makes me want to take a crack at doing a Red Sonja.
Souf Afrrikan?
Absolutely love these videos. Your techniques are simple yet have beautiful results. Finding Groundeffected and CA 3D studios has been a game changer in modelling. I can't wait to unlock ALL of the models that CA 3D studios has available to supporters. There are so many and they are all exquisite!!! Thank you all for the great content!
On a side note, it is interesting to see so many paints and washes that I already use for armor modelling such as the ammo metal and tamiya wash. Quick tip on the wash, it is an enamel so if you do happen to get it somewhere you don't want, some enamel thinner will clean it up without ruining the acrylic paints underneath!
Mud splatter techniques used in armor modelling would also work well for blood splatters. Add some paint to the brush, dab excess off, then use a toothpick to pull the bristles back and let them fling onto the model.
Turned out incredible thanks for sharing!
I'm across the pond in Ireland, and the cold is killing my prints! might look into this!
Great job you did there, congrats! By the way, I don't know if you mentioned it before but I would like to know what brand/model of airbrush and compressor you use. Thanks
Oh it is in the description. Nevermind me then. Cheers, man.
Haha glad you found it
Spectacular! Thank you for the very detailed explanations!
Amazing. Red Sonja looks awesome
Another get model! Do you cure your parts just a bit? Easier to remove supports and other little imperfections and give the parts a complete cure after?
I remove supports and usually any bits I can see with gloves then I cure for a short time and then clean up the parts and then cure them again after brushing with alcohol because I don’t want any little bits in my paint or on the surface. It’s a long job but it’s worth it
bloody talented fella ! amazing - hank you for sharing your talents
what did you do or use for the seams when super gluing together? thanks! awesome outcome man.. ill never get that good.. thinking about starting lol
How long do you cure the models for the first time and then the second?
Um usually do like a 3 min cure then I prep them and then a 5 min. It’s gonna depend on your curing machine though cos they don’t all produce the same intensity of light
I love Red Sonja and love how you painted that model... Subscribed!
Thanks for the sub!
Awesome job. I really love how you do the flesh tones. I have to try your method and see what result I get.
How do you get all your parts to fit so clean. I am always filling gaps between parts
What size printer is needed, to print 1:10 & 1:6 sized statues an diorama. I would like to print and paint models as you do.
A lot of sculptors but their models to fit most printers but the ideal size is the mid range like gktwo or sonic mighty etc
I just bought a 6th scale April O' Neil figure from someone and I was wondering how long does it take to print something like that? This is a custom figure that will also be painted
what primer should i use for the crow .stl its nearly all black ,both shiny and matte.
You dont use air varieties of vallejo? I noticed you used normale ones. Do you thin them all ? Thank you
I don’t know anything about 3d printer but love your work my question is where do you buy the blueprints to make the se action figures ? Is there many website for this or people selling them
They are linked in the description of this video
How does someone learn to do this stuff. I’ve always been fascinated by painted models but I have no idea where to get started.
At 11:13, I am pretty sure you are using, Ammo's METALLIC Silver A.MIG-0195, pretty sure of it as their metallic steel MIG-191 looks not that silvery...Pretty sure that it's their silver. Hope that helps. They only have matt aluminum, which could also be it, but then again, it looks pretty silvery to me.
I am pretty sure you right. I am also sure it had the word shiny in the name. But I can’t remember
I have Red Sonja on DVD. Cool to see this model made.
amazing job, amazing model.
Thank you very much!
That Spider-Girl in your collection. I need it. Did you make the file to print it, or did you download it from somewhere?
Kinda excited to see how Raven turns out now!
I use a old toothbrush for splatter, drawing my finger over it. I use it for mud on vehicles (sometimes mixed with baking powder for thickness) or thinned black for oil drippings. I also did it for the spots on bamboo trees. It can be used for the small spatters of blood too.
I'm a bit of a clumsy painter, so blood effects come natural. Love the paintjob (as usual), the skin and leather look amazing!
What a skill man! So amazingly everything you did here... I can't believe the quality
Love the subtle SAFFA humor. great vid mate.
Where can we get the model? I can't seem to find a link to it in the description. I like it a lot. :)
Would you please share me the branch of brush you're using mate ?! Please also give us the eye painting processes !!! You do it so easily lol
hi, can you tell me the name of the knife you used for the scratch model? no matter how much I looked, I found model scalpels with a thin blade everywhere
You’re at the top of your game son! 👏🏻
Awesome, I will use your work to help me paint my version of Red Sonya!
Excellent work as usual dad
All I can say is WOW!!!
Wow ! I think that's your best paint job thus far .
can these models from the patreon be scaled up? to 1/4 or 1/5?
Hello word box old friend... I agree about CA 3D sculpts they are great and also represent a VERY good value.
You’re the king of painting models. Awesome work man
Can I ask what type of paint is best for resin 3D figures
New to 3d printing but are resin printers only good for model type printing?
I’m looking into getting a 3D printer. Does this one cure the models as well as print them?
Fantastic Staute and Paint!!!!! Awesome
I need that Red Sonja in 1/4 scale!!! Do you do commissions?
Amazing! What scale was this printed in?
Amazing models and painting, you got a New subscriber
Thank you !
is there a way to paint a 7 inch model statue
Bro I just wanted to paint a low poly cloud strife statue, came here for tips, and just got completely side tracked watching the whole thing. Incredible work!
That Rogue statue is awesome. Do want 😊
you've outdone yourself!
That looks perfect.
So Glad I stumbled on your channel. Model kit builder as a kid and wanted to get back into the hobby. WoW! STL Resin Printing is ... AMAZING!! Just got my first printer station Mars Ultra and I'm having Fun Fun Fun learning all of this. Hope to be as good as you one day a goal to strive for. Your talent is inspiring, Thanks for sharing.
Had to subscribe after watching a couple videos. Great work dude!
how long is your first cure and second cure time?
can we buy your finished models
great video as always! hav you thought about making a full on online course for painting human models? i would love to enroll to it!
Love CA 3D, as soon as I joined, I suggested a Cyberpunk Ciri in the Discord, and now we're getting one!! Great work on Red Sonja, she's one of my favourite characters.
Oh sweet! I saw this STL just recently and thought it looked cool. I'll save this video for watching later. Thanks 😊
siiiiiiiiiiick, absolutly stunning
Très beau travail !
Incredible, I had to pause the video in many places to take in all the detail, that chaotic blood spatter made all the difference.
Another inspirational classic, thank you (and thank you).
I've learned so much from your videos! Just having trouble getting Vallejo paint in South Africa :(
Nice finish
Absolutely stunning
what scale did you print Sonja? great video
that looks amazing, wish i could paint like that am not very good...
Excellent work as always. I have her scheduled to print this weekend. Th eyes and the blood splatter really add intensity to this model.
Bravo Laddie!
An impressive job well done my friend.
Tom Cesarz
I.L.M. Retired
I have a question: How long is your painting process from start to finish? Also, beautiful work. Love watching your videos!!
It says 20 minutes in the title
@@jessehavok4181but is that real or fake ? paint in 20 min ?
@@jessehavok4181 The video is 20 minutes, not the process.
Boy does she look pissed. Great techniques. I am snagging the pink/purple thing.
god your prints look so good!! i have a hard time getting the support marks off and not loosing details from sanding
How do you prepare pla pieces? Is not the same as resin ones.
It’s almost exactly the same. Sand, prime, paint
another banger... great work bro.
Это великолепно просто! Красавчик! Я получил огромное наслаждение от просмотра👍
Thanks dude.
What are those things holding the 3d print pieces?
Either broken paint brush handles or crocodile clamps
@groundeffected I'm looking to get a Elegoo Mars 5 Ultra and am wondering if it's too small of a 3D printer to do these types of prints. Build size is 153.36 x 77.76 x 165 mm³, is this enough or should I look at getting something bigger?
you inspired me to make my own figurines and paint them thank you :)