You didn’t say where On the c bar led hard wiring where did you tap into for the two wires into what others ? I ran my wires on my 98 OBS into the side markers but I get hyper flash and also makes the C bar leds to flash with the blinkers.
ohhh see these are the ones i bought!!! i just commented on your video about the lower lights having wires and not being a plug in play. so the lower lights you connect to the DRL and then for the top lights you connect them to the lower light wires correct?
Thank you! I was trying to figure out if I should wire it to my drls or maybe ignition so they are on at all times. But maybe that's an overkill at night with the lowbeams on?
@Andy Camooch no is just getting power from there. They'll turn on automatically at night with your headlights. During the day you can switch them on with the knob that turns on your headlights. You can run them with or without your low beams on.
I got the same headlights which I installed yesterday. Passenger side works fine Drive side the white led doesn't work, it works when it switches to amber for blinker, but that it as far as the led line goes. Any ideas?? Appreciate it
Got it figured out. After getting frustrated and splicing the same wires over and over, I used better splice connectors. Problem solved. Ones provided gave a crap connection
The top led strip connects to the bottom led strip. The bottom led strip connects to the turn signal harness but you only tap into power nd ground so it doesnt flash when you use ur turn signal
@@DopeTheft Thanks for that. That harness has three wires. Which ones is the power and the ground( black I’m assuming). New to this. Thanks for the help.
Link for those lights?? The L's
"amzn.to/4fd2o18"
amzn.to/3LFc0Eo
I did the same quick connectors on my gmc. Makes everything so much easier
Right ✅️‼️💯
That's embarrassing 😳 I came here to call out that disgusting wiring you got going on here
Both look good
Nice truck bro I just saw a parked at Swift
I like the headlights
Thanks bro appreciate it 🙏
Both look dope G 🔥 there’s no bad decision lol
you got link to the c shape strip lights on the left. im liking those. need to replace my old faded one out
amzn.to/45r4GEL
@@DopeTheft thank you
You didn’t say where On the c bar led hard wiring where did you tap into for the two wires into what others ? I ran my wires on my 98 OBS into the side markers but I get hyper flash and also makes the C bar leds to flash with the blinkers.
ua-cam.com/video/FvHTZC6j7tg/v-deo.html heres a better video i made.
@@DopeTheft
So you run the headlight U bar to the day time running low beam ? And then you ran the bottom turn lense Led too the side marker
Hey bro gud video were did you purchase them new headlight at gracias
amzn.to/3MsKNGn
Pa quick question where are your leds connected too?
Turn sign bulb. Connect it to the brown and black wire.
Which wires did you tie into?? Daytime running light??
Turn signal lights
What do you tap into for the top lights I got both of the ones from the bottom to work but can’t get the top ones to work
The top ones tap into the bottom headlights
question why is my 04 silverado dtr light on the top and not on the bottom like stock silverados?
Thats a good question, idk there always on bottom unless the previous owner modified it
What led bulbs are you running?
amzn.to/3puZuje
Where did u get the connector that you used
They came with the lights but you can get them at Walmart or autozone
ohhh see these are the ones i bought!!! i just commented on your video about the lower lights having wires and not being a plug in play. so the lower lights you connect to the DRL and then for the top lights you connect them to the lower light wires correct?
Yes bro glad my videos helped out
Nice video! Which lights did you splice the LEDs strips into? The daytime running light wires?
Yes dtr brown n black wire
Thank you! I was trying to figure out if I should wire it to my drls or maybe ignition so they are on at all times. But maybe that's an overkill at night with the lowbeams on?
ua-cam.com/video/FvHTZC6j7tg/v-deo.html heres a better video i made. I think i tapped into the turn signal light not the drl
Sweet thanks. I'll watch it after work. So does that mean they only go on when you use the turn signal?
@Andy Camooch no is just getting power from there. They'll turn on automatically at night with your headlights. During the day you can switch them on with the knob that turns on your headlights. You can run them with or without your low beams on.
Where did u get the new chrome ones ?
Amazon bro
I got the same headlights which I installed yesterday. Passenger side works fine
Drive side the white led doesn't work, it works when it switches to amber for blinker, but that it as far as the led line goes. Any ideas??
Appreciate it
Damn thats weird, only thing would be is to double check all ur connects on that side 🤔
Got it figured out. After getting frustrated and splicing the same wires over and over, I used better splice connectors. Problem solved. Ones provided gave a crap connection
Figures, its always a bad connection when it comes to that.
Yo what was the paint code of the blue you had on the truck?
Idr i just know it was a Toyota blue
How are they holding up bro
Love em bro. So far so good
Awesome you've inspired me to do them on mine I'll make a video with my custom work is done
fire video bro! 🔥
Thx bro ‼️✅️🤘🏼
Do you run both top and both led strip wires to the DRL harness on the bottom?
The top led strip connects to the bottom led strip. The bottom led strip connects to the turn signal harness but you only tap into power nd ground so it doesnt flash when you use ur turn signal
@@DopeTheft
Thanks for that.
That harness has three wires. Which ones is the power and the ground( black I’m assuming).
New to this. Thanks for the help.
@@gerardotorres6274 brown power black ground
@@DopeTheft
Thanks. I appreciate your help.
Hm would u charge to get mines working bro ? I’m in az bro lmk
$25 lmk
Ey bro do yours turn on on auto or nah ?
No they turn on with the Headlight switch
Yo what color wires did you use out of the blue black and brown ?
Black n brown
Blue (blinker) to yellows, brown(power)to red and white on headlight and running lights, black(ground) to black
great video, excuse me do you know how to turn on the light nex to turns signal? or what is his function?
Depending on the lights you'll either need a bulb or just connect the wire provided. I believe on these i needed a buld but i didnt have one on.