Love watching these vids! I’d love for us to be able to sit down for about a week and build gearboxes. I love the tech side, but I’m just not that good at it. I’ve tried many times, must take a good talent lol
That lonex spiral bevel and pinion is absolute magic! I'm using a g&g bevel gear in my dsg build, and while I find that it is quieter than shs/zci bevels, I still get the slight bevel whine. Definitely gatta give one of those spiral sets a try!
The split gb is pretty convenient! Though I wouldn't recommend it for a cyma plat base if you plan to use the built in qsc, stresses are going places I'm not comfortable with, gotta do something about that... Originally I just wanted to be able to crack the upper off real steel style 😂
These two came with the Aztech cylinderhead and by magical coincidence they gave me just the right amount of spacing! Before you choose to put pads in, consider if you want to shim from the piston or the cylinder head; both have ups and downs, but if you decide to shim from cylinderhead, you can grab neoprene or sorbothane pads for aoe correction. I get mine from Brillarmory, but they're available from a bunch of airsoft retailers. If you know your stuff, you could even get them straight from McMaster! If you need a specific uncommon hole pattern, I suggest getting the blank pads and poking them yourself. NOTE: while both are squishy, sorbothane is squishiER and will compress under spring load so plan for that when you shim using either of the two
sweet thank you i already own a alpine white vector for a while and i wanted more out of it loved to see a full break down or explaining if possible as i am not a seasoned mechanic
they're mainly crappy ferrous cans so I've thrown those away at this point, but eventually I plan on rewrapping the armatures for the neodymium motors to use in low budget builds!
Yep alignment. Especially on higher stress builds or even just higher rpm motors, the motor can actually get forced or jump off the bevel and the pinion will start skipping and grind teeth off. Main reason why I'm a huge fan of v3 gbs, caged motor.
Is too high? You mean it doesn't entirely slot in? I would just cut off or file down the excess material off the offending sides until it roughly matches the marks I made around 4:50 Any fine tuning of motor alignment from there should be done by shimming the motor screws
@@j-airsoft Thanks for the response! Love your teching videos, they are very informing and fun to watch :) I started teching and I keep learning new things, and your videos alone helped me visualize what I was mostly told on forums and vids :D Keep up the great work!
Aluminum tape/foil tape, but it also gets messed up if i ram the motor in without thinking. If you put it about halfway down the tower, the tower gets a chance to straighten out a bit more before the tape hits the gearbox chamfers, lessening the chance it'll get messed up
@@j-airsoft I’ll definitely have to try that instead of covering the whole tower with foil tape. I’ve been covering the tower after I tape it in silicone grease and it sorta helps
@@michaelmarsh5619 it leaves a lot to be desired and i suggest not using it for long range accuracy builds or dsgs unless you're ready for a challenge, but it's cool
@@m.bintangatmajabenzema9905 I always remove from pickup side. In my head I don't want to risk letting the piston go earlier because the tappet release is constant no matter which side you remove. Chance of compression before tappet has sealed. Others have success doing it their way too.
The nozzle on this guy spins quite a bit, so you'll need a 50mm anti reversal latch to go with its 12:1 tappet plate. (It's April 1st. Nozzles don't have anti reversal latches.)
@@m.bintangatmajabenzema9905 i actually didn't get any with that one, I just wanted to try the t238 mid build and forgot it was lower rpm. Piston weighs like 18g, idr
That random cycling had me rolling! 😆
What an amazing work on this Airsoft Gun... You got serious techniques indeed
Love watching these vids! I’d love for us to be able to sit down for about a week and build gearboxes. I love the tech side, but I’m just not that good at it. I’ve tried many times, must take a good talent lol
That lonex spiral bevel and pinion is absolute magic! I'm using a g&g bevel gear in my dsg build, and while I find that it is quieter than shs/zci bevels, I still get the slight bevel whine. Definitely gatta give one of those spiral sets a try!
I love your tech vids
What were the gear ratios please, u make perfect content
❤
Very nice. Sprial dsg+leviathan+brushless is def the current aeg meta. I might have to get a split gearbox now i usually use reglar retros
The split gb is pretty convenient! Though I wouldn't recommend it for a cyma plat base if you plan to use the built in qsc, stresses are going places I'm not comfortable with, gotta do something about that... Originally I just wanted to be able to crack the upper off real steel style 😂
I look so complicated but I would love to learn
Quick question for ya, where would I be able to get those spacers to put into my compression system for alignment? Love your videos btw!
These two came with the Aztech cylinderhead and by magical coincidence they gave me just the right amount of spacing!
Before you choose to put pads in, consider if you want to shim from the piston or the cylinder head; both have ups and downs, but if you decide to shim from cylinderhead, you can grab neoprene or sorbothane pads for aoe correction. I get mine from Brillarmory, but they're available from a bunch of airsoft retailers. If you know your stuff, you could even get them straight from McMaster! If you need a specific uncommon hole pattern, I suggest getting the blank pads and poking them yourself.
NOTE: while both are squishy, sorbothane is squishiER and will compress under spring load so plan for that when you shim using either of the two
@@j-airsoft I really appreciate your expertise on this. Thanks so much!!
how to make the sound like this? is it the sound of a motor or gears or other details?
need sound like this)))) help
Too bad i cant get spiral lonex set. Damnn it sounds do good
What was happening when you first started to fire it and it engaged an "auto mode" spinning non stop? HAHAHAHA Great vid!
Had to recalibrate the cycle sensor😂
@@j-airsoft ohh understood hahahaha 😁
Muito top
Tô querendo montar uma, só que aqui no Brasil é muito caro as peças
How can i find a tuner like you in Indonesia😂
kinda odd but i wanted to know what part are used in the dsg vector bulid
i recently saw ur videos and i fell in love with a dsg vector
Glad you like the Vector! You can find my parts in this video's description~ ua-cam.com/video/FwiNOXyndKk/v-deo.html
sweet thank you
i already own a alpine white vector for a while and i wanted more out of it
loved to see a full break down or explaining if possible as i am not a seasoned mechanic
I finished it! ua-cam.com/play/PLOQxGRqn9AUMMSdjf4HfGn8OJGSBMSoDE.html
Stock gearset was 13.65:1 12T
bevel/pinion 30:10
spur/bevel 39:10
sector/spur 28:24
What you think about new aster v2 se looks like they upgraded it well godd fir dsg or still perun better?
I've never installed a GATE before, mainly because I hate using GCS, so I can't give you a good answer
Where can we contact you if we would like you to upgraded our gearbox?
My discord contact info can be found on my home page, but I may still decline the job
For some reason it doesn’t work
what spring are you using and why closed cylinder?
sp150, xring doesn't like ports
*If it were to actually slide past them
What did you do to get the O type pinion on a D type shaft?
ua-cam.com/video/TWe0Y931i7w/v-deo.htmlsi=5iWU63k1bAavKXT6
what do you do with all those motors lol
they're mainly crappy ferrous cans so I've thrown those away at this point, but eventually I plan on rewrapping the armatures for the neodymium motors to use in low budget builds!
What is your favorite piston head to use?
fps softair cnc pom heads
Hello how i need to set up warhead and jefftron?
Exactly the same as a normal motor.
what’s the tape wrapped around the motor for?
Alignment
Yep alignment. Especially on higher stress builds or even just higher rpm motors, the motor can actually get forced or jump off the bevel and the pinion will start skipping and grind teeth off. Main reason why I'm a huge fan of v3 gbs, caged motor.
@@atlasvltor7260 good to know i never knew that
@@jovannyfeliciano6604 yeah he does sweet job. You should try that too, it makes aeg sound much better and efficient
Hey J, what do you do if the motor grip is too high to match the lower receiver?
Is too high? You mean it doesn't entirely slot in? I would just cut off or file down the excess material off the offending sides until it roughly matches the marks I made around 4:50
Any fine tuning of motor alignment from there should be done by shimming the motor screws
@@j-airsoft Thanks for the response! Love your teching videos, they are very informing and fun to watch :) I started teching and I keep learning new things, and your videos alone helped me visualize what I was mostly told on forums and vids :D Keep up the great work!
What tape are you using? I’ve been using some thin duct work tape and it’s a pain in the ass lol. It always kinks up
Aluminum tape/foil tape, but it also gets messed up if i ram the motor in without thinking. If you put it about halfway down the tower, the tower gets a chance to straighten out a bit more before the tape hits the gearbox chamfers, lessening the chance it'll get messed up
@@j-airsoft I’ll definitely have to try that instead of covering the whole tower with foil tape. I’ve been covering the tower after I tape it in silicone grease and it sorta helps
@@j-airsoft also how do you like the aztech tappetless cylinder head? Been thinking about getting one
@@michaelmarsh5619 it leaves a lot to be desired and i suggest not using it for long range accuracy builds or dsgs unless you're ready for a challenge, but it's cool
did u end up leaving the piston with all of its teeth?
I've taken eight teeth off! Although the sectors are only 6T in my current config for CQB FPS. Just in case I need more output in the future.
@@j-airsoft thx for the response i just watched the later vid and saw that thanks for the info
@@j-airsoftwhere you cut the sector? release or pickup?
@@m.bintangatmajabenzema9905 I always remove from pickup side. In my head I don't want to risk letting the piston go earlier because the tappet release is constant no matter which side you remove. Chance of compression before tappet has sealed. Others have success doing it their way too.
@@j-airsoft nice,thnks for replying
what gear ratio??
~17:1
Yo what bevel and pinion do you use on majority of your builds?
Lonex spiral!
@@j-airsoft great im going to try it. Is it compatible with shs/rocket airsoft gears?
@@Fame_Maker yep! I'm using the rocket 16:1 spur and 18:1 rocket dsg here
How long is the nozzle ARL
The nozzle on this guy spins quite a bit, so you'll need a 50mm anti reversal latch to go with its 12:1 tappet plate.
(It's April 1st. Nozzles don't have anti reversal latches.)
I was looking at this like an idiot wth were you doin
I want
hehe
What gear ratio and what rpm warhead?
Using the 16;1 spur making it a 17;1 set. (17.76;1), 3 * 3.7 * 1.6, bevel spur sector
52K @11.1 Warhead (Now a 33K T238)
@@j-airsoftnice work..crisp trigger..but wait..52k with 16:1 dsg??its not to fast?how bout the gun now?
@@m.bintangatmajabenzema9905 it WAS 52K, I swapped in a T238 for ~58RPS
@@j-airsoft yeah i mean.. with ultra speed wh motor you not worry bout pme?
@@m.bintangatmajabenzema9905 i actually didn't get any with that one, I just wanted to try the t238 mid build and forgot it was lower rpm. Piston weighs like 18g, idr
Can i put a PTS EPG onto a stock cyma platinum too?
Yes, you should have no issues with alignment either. Great grip
@@j-airsoft Thx
Is this gun drop in ready for the gate aster or gate titan?
all V2 shells are, but don't Gate 😅
@@j-airsoft I would like to use a gate since they use the app
@@Daly0_ gate is not the only one with an app
@@j-airsoft what mosfet and app do you use
@@Daly0_facts I just got this gun and was gonna go gate….. please tell the juice daddy