1st Gen CRV Custom Fog Light install using 03-07 Honda Accord Fog Lights
Вставка
- Опубліковано 24 жов 2021
- Tutorial on how to install fog lights from an 03-07 Honda Accord and custom fitting then onto a 97-01 1st Gen CRV. It’s a commonly done install in the RD1 groups. The fog lights fit well when install properly. Here’s a link to the parts used in the video and a discount code for Coilovers on MaXpeedingrods.com
Discount code: MooreUS
8% off ⬆️⬆️⬆️
Link to Fog Lights
www.ebay.com/itm/For-2003-200...
LED light bulbs
www.ebay.com/itm/4-Sides-H11-...
Follow me on Instagram :
just1moorehonda...
Follow my Honda Garage page on Facebook
This video is for reference purposes only.
Disclaimer: Due to factors beyond control of Moore Projects, I cannot guarantee against improper use for unauthorized modification of this information. Moore Projects assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Moore Projects. - Авто та транспорт
Love the wheel and fender flare set up looks awesome
I just bought a 2001 Honda CR-V 140,000 miles giving me some great ideas thank you sharing this video 👍
Thank you for this! Looking forward to the projector headlights video!
ua-cam.com/video/6KVpwsFWrUg/v-deo.html
Retro fit video is posted. Sorry for the wait
The wide body look is so badass
Thanks dude. I agree 👍🏻
awesome video! I got so many ideas from this it;s a great video. when I got the one I have the bumper was cracked, hanging off and looks horrific, so i repaired it, i tried several things on it and i hit the jack pot a couple of times. I had just got it and was not looking for parts or anything yet, it's still just a week new to me actually. but NOW I can see whats up. when I do go pull parts from the jungle i am going to get all kinds of goodies and make this thing look wicked. That plastic the bumpers are made of can be welded DELUXE reinforced and put back together. I have the 4 foot long black zip ties and I used a small torch to put a blasted hole in the shape of star right back in the bumper. I was amazed at how well it accepted molding this way, in places i used JB weld clear super pro super glue just to keep the seam fire rolling and I clamped and used ice and water to col down spots so I could weld in other spots and cut back what I didn't like. so i was thinking , from everything i just saw here, I will pull whole parts and add to them, so that i do have factory looking holes that fit the lights I pick! i mean, it will be a sick looking custom frame the light pops into, the other bonder i was using was BLACK ABS glue, I leaned this stuffs ability to make tabs and form connectors on hard to find parts for my 99 gold wing. having abs plastic to meld into your work by drilling holes on spare parts and collecting the shavings is a great way to build up solid tabs and ridges that you can carve down to what you want with an oscillating saw and dremmel. then sand the outsides to make a smooth finish so it looks like it was all factory stuff. thumbs up on this one man. thanks.
I just bought my first Gen and the original owner had made these same cuts for the same style headlights and left it to me to install. Wish me luck!
Good luck!!!
Those fog lights look nice 👍
Yes, it was very nice lamp installation n d wires, thanks for the good idea, goodah!!
Round fenders bro 🔥🔥
Looks so good
I agree!
Great video bro
Glad you enjoyed it
Tape the edges and run a beed of seem sealer or a type of eurathane around it which will smooth the edges off
Good job 👍
Thank you
Thanks for sharing 👍
Thanks for watching!
Hey thanks for the video I have a 2004 but I don’t like the front bumper can’t that be upgrade thanks
Look cool 👍
Fire 🔥
Came out looking nice. Like factory marker lights. But since they are mounted upside-down, isn't the light aimed up rather than down in the road?
When I drive with them on at night the actually shine with good coverage around the vehicle. They shine more on the edge of the road than in front. They do have some adjustments, but hard to get to once the bumper is installed…
If you run the red wire off of the positive wire for the low beam headlights then the fog lights will go off when you brighten your headlights like a factory fog light does
This is true! Good note
hey there i have the same make and model , crv how much would charge to install them on my car.
Hello, nice looking fog lights... I also like the front bumper's spoiler, what cars use them, I mean how to search one of these spoiler? Thanks ..
Jack the car up and put it on jack stands. That's very funny. I too watch mighty car mods.
Where did you get that grille
For the positive and accessory wires what is the piece called at end of wire to make fit in those connections
Bullet connector is round Or spade connector is flat
Hey man. Awesome video. Just curious what did you do on the stock airbox behind the passenger side fog light? Did you put it back? Or you left the two openings open or did you plug them? Thanks
I didn’t put it back. It only is there for keeping the intake noise down. I left those open. It still has to go thru the filter before it goes to the engine
@@MooreProjects what do you use to block those hole? thanks, also i saw some people say remove air intake resonator will lose power too
@@mhz1000aa I never plugged the holes. No lose of power or gas mileage. I still get 21 mpg. No issues in the rain either.
Can you please tell me what did you use for that front bumper chin? I just bought a 97 CRV and I want to install something like that on the front
2005 Jeep Cherokee front valance
www.ebay.com/itm/NEW-Front-Bumper-Lower-Air-Deflector-for-2005-2007-Jeep-Grand-Cherokee-5159125AA-/351385692996?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
What happened to your bumper support???
This work is so clean! I want to make custom headlights like this for my Ls400 but my skill level wouldn't be like this.
What model is that bumper from? On my crv I have the bumper from rd2 with the round fog lights, but this one looks more aggressive and nice! Would you be kind enough to let me know what bumper that is?
And the lip under the bumper!! Please
Where did you get/ make the front spoiler. Awesome job
It’s off a 05-07 Jeep Cherokee. Bought it on eBay for like $40. Had to cut slits in the factory bumper to install. Used self tapping screws to hold.
where you get that grille from
Hey looks good what type of rims an an tire size you on that one am getting ready lower mind an was trying to get the right rims an tires thanks
Thanks. They are Jeep Wrangler wheels. These came off a 2015 but they come off of many year models. They are 17x7 +44 offset. Tires are Landspider 235/50/ZR17 I purchased off eBay. Also have to run an adapter since the Jeep wheels are 5x5 lug pattern. So I’m using 5x114.3 to 5x5 hubcentric 1.25” thick wheel adapters. Also had to order the lug nuts to fit the Jeep wheel studs on the adapaters
@@MooreProjects thanks that was helpful!!
is your valve cover painted or powder coated???
and how did you get it so that your camshaft gears are exposed?
Used a dremel tool to expose the cam gear and yes it’s painted with Wrinkle red paint from Duplicolor. I actually just got it powdercoated with the same color but added a Rising sun decal to it. Check it out on instagram @just1moorehonda
Humm. I'm a big rd1 guy. You should do stock rd1 fog iights. Less cutting in bumper cover,
4 rivet nuts in stock hole location. Bam....
And blind less traffic! Still a decent look.
Got any vids or pics on how you did the mesh on the bumper? I’ve seen videos on the grill but never the bumper
I don’t have a video. But I’ll give you idea, I used honeycomb mesh sheet from eBay. And used a dremel tool with a cutting wheel. And then cut the pieces a little oversized and pressed them in to place
I though about plastic welding it into place
So no bolts, zip ties, plastic glue? Just worked with bending them?
@@coolpeepkoolaid correct. Just made them a little over sized and fit them in by hand. They haven’t fallen out yet lol it’s been almost 6 months
What size rims and tires that looks really good
The tires are 235/50/zr17
Wheels are Jeep wheels 17x7 +45 offset with 1.25 wheel adapters from 5x114.3 to 5x5 for the Jeep wheels to fit
yoo what tint percent is your crv at I want mine to be just like it!
15%
Where did you get the front lip from?
eBay. 06 Jeep Cherokee front valance
Where I can get the bumper lip
eBay $40 05-07 Jeep Cherokee lip
👍👍👍👍
Where did you get the grill from?
Made it myself
Hey Matt. Where did you get the front grill. Looks cool.
I made it myself. Out of a honeycomb mesh sheet off of eBay. Did some cutting with a dremel and used the factory screws
@@MooreProjects Tidy work. Well done.
Tires? And rims?
What kind of front lip is that from ?
2006 Jeep Cherokee lip
Need a video at night
Do u need spacers to mount those wheels on Crv?
Yeah I’m using 1.25” adapters from 5x114.3(CRV) to 5x5 (Jeep)
Also you will need new short lugs nuts to mount the adapters. Since the threads are different on the adapter.
its a great idea and would have looked good if the holes weren't way over sized, looks super ghetto and cheep
Where did get the lower bumper paces?
eBay. Look up 06 Jeep Cherokee valance. Slight trimming on the valance piece needs to be made to bend and slots need to be put on CRV bumper to fit flush. Easy to do tho
Thank you sir
Do have a video of how you did the lower bumper pace?
Where u get the fenders
Cheap universal set off eBay
I have another video showing how to install them also. With the links in the description for the parts
Where did you get your projector lights
eBay
ua-cam.com/video/6KVpwsFWrUg/v-deo.html
You ever posting video bout retrofitted
Yeah I have it ready to post. Sorry I haven’t posted it yet. I wanted to add one thing to it first. I’ll post it up for you tomorrow
ua-cam.com/video/6KVpwsFWrUg/v-deo.html
New retrofit video is posted
С какой машины противотуманки? Скажите пожалуйста
What size &brand of the wheels looks like jeeps
2015 Jeep Wrangler wheels. 17x7.5 +42 offset. Using 1.25” wheels spacers from 5x4.5 to 5x5 adapter
Running 235/50/17 tires
От какого автомобиля противотуманные фары?
Здравствуйте подскажите с чего эти фары
10:50 wiring
What fender flares did you use on this CR-V?
Cheap $40 universal ones off eBay. I have another video of the install on my channel. It should have a link in the description
@@MooreProjects j
Blue tape people. Come on!!
Can you send a link to the parts you used for the headlights? Trying to figure out what i need to retrofit HIDs and projectors looking at ddm hid bulb kit 35w with morimoto mini d2s 5.0 projectors but even that is gonna run 400$ seems kinda high lol
I said the same thing. These work fine and only cost me like $75 lol
www.ebay.com/itm/2-5-Honeycomb-Bi-xenon-HID-Projector-Lens-Blue-Devil-Eyes-Headlight-Retrofit-/234159611807?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
www.ebay.com/itm/2-5-Honeycomb-Lens-LED-Angel-Eyes-Halo-Ring-Bi-xenon-Projector-Headlight-Tuning-/114766827390?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
www.ebay.com/itm/Lasfit-H1-LED-Headlight-Bulbs-Kit-High-Low-Beam-Cool-White-6000K-Bright-Wireless-/124567057623?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Is that civic wheels..? 🤔
Jeep wheels
👍👍👍🇦🇿👍
Thank you!!
You’re wiring seems to confuse me. I have a blue white and black wire. And you ran two grounds
I gotta be honest bruh I hate those fender flares. You really needed a bigger size. Would only be like 40 bucks to order a set of 890mm
That’s alright we all have opinions. I wish they were all the same size as the rear ones since those sit perfect with the wheels. Maybe one day I’ll order an extra set and swap them out
Капец колхоз, жесть просто. На герметик все посадил. Просто жесть!
I put a quick release bumper on mine so I can put it off on a hurry 😂