Thanks for the info, just purchased a Haibike Trekking 4 High 500. Have tried it out today and love it, found out a few of these things myself but found your video helpful 👍
Hi, ive got a hardseven 6 and yesterday was the first time ive used it in the dark. When i turned it on i couldn't see the screen because it wasnt lit up. I noticed on the video that that one isn't lit up either. Is there a way to turn the blue backlight on and off? Cheers
I Have an haibike with motor pw-x3, can you explain me please how to use walk mode. I cannot understand the procedure because my english is so and so. Thank you for the video
If it has this sideswitch control you just hold down the button with an image of someone walking with their bike. The bike will then push itself along. :)
Does this display have an internal watch type battery. The display on my bike is not working properly, dimly lit or doesn't turn on and I've seen where the Model B control has a watch battery but I can't find any reference for the Model A control.
No it doesn’t have an internal battery, it could be the automatic backlight feature that is not working. Perhaps take the machine to be serviced at your local Yamaha Haibike specialist.
Hallo, eine Dragw bitte;, über dem Modus high steht noch expw extrapower, wie kommt man in diesen Modus? Bei meinen haibike alltrail wird es angezeigt u bei meinem trekking bike das auch dasselbe yamaha Display hat, gibt's diese Funktion nicht. Frage mich eben wann das einschaltet o.überhaupt?, doch sonst würde es doch nicht dort stehen bei anmachen des Displays. Vielleicht weiß jemand einen Rat, würde mich freuen. LG aus Hessen 🚵♂️🚵♂️🤙🏼
They come in a variety of lengths and should come with enough cable and a plug to go into the frame just behind the head tube. The bridging cable from the controls to the motor is normally separate and reused when the controls are replaced. It runs from The motor where it is plugged in up to the head tube area on the ebike. Here it is connected to the sideswitch controls.
On the ODO screen hold down the up and down arrow together and the screen will flash km or mph. Scroll to the one you want then press and hold down to save it. Switch off and back on again and it should now be sorted.
I just got my Haibike trekking 4 and i have an issue with the pedal assist, it works fine for 5 seconds after turning the bike on but then after that it just doesn't work anymore. Any tips?
Lovely bike! I would recommend checking with the shop you got it from, and ask have they serviced it correctly initially. Sounds like a speed sensor error maybe. If you are local to our Shoreham store bring it down for a service. Hope that helps.
Press and hold the down button for a few seconds and the info screen will change. It will move between range, trip and total distance. Once the info has changed press and hold again to scroll to the next piece of info.
Hi there, I have recently brought 2 kids overvolt's with the pw-te motor they have this display, the walk button doesn't do anything and they can only get assist if they stand and pedal there hardest if they try to cruse along they only get to 5 mph if they ride my wife's trek rail with the bosch motor they can easily do 15mph any ideas? Is there bikes set up wrong?
The junior e-bikes have no auto mode, no walk mode and are limited to 12.5mph instead of the normal 15.2mph. This is to be expected on a junior EBike and is not adjustable after market as I understand.
Only works when lights are wired to the motor using the dedicated light cable (hidden with the motor wiring loom cables). Press for on and press again for off.
Okay, this is from memory so excuse me if I get it wrong: On the ODOMETER screen press and hold both the arrow up and arrow down buttons simultaneously. Try it pressing the buttons closer to the screen and you may find it easier. Once you have accessed the screen kmph will flash, you can then singularly press up or down to get it to change to mph and back to kmph. Once it is on the one you want press the power off button to save. Hope this helps!
No although there are instructions online for opening the built in diagnostic system to clear down error codes as I understand it. We use the Yamaha dealer software though to reset the ebike after multiple faults (as it will likely shut down or have limited power). You could remove the battery, refit it a few minutes later and see if that helps. I have seen some errors on Yamaha resolving from battery removal and refitting. Best to take to your nearest Yamaha ebike dealer if problem persists.
Okay, this is from memory so excuse me if I get it wrong: On the ODOMETER screen press and hold both the arrow up and arrow down buttons simultaneously. Try it pressing the buttons closer to the screen and you may find it easier. Once you have accessed the screen kmph will flash, you can then singularly press up or down to get it to change to mph and back to kmph. Once it is on the one you want press the power off button to save. Hope this helps!
Sounds like you are on trip or odometer and not range. Otherwise it could be a software issue and you may need it looking at by a certified dealer with Yamaha diagnostics like ourselves.
It could be a screen failure, you can test this at your local Yamaha ebike dealer using their diagnostic tool. If it isn’t the screen it may be software related and could require an update once again that is probably sortable with the diagnostic tool the dealer will have downloaded in conjunction with their special dealer key.
Hi, i have a Haibike and i don’t understand why i can’t use the Auto mode or the last EXPW function. Anything helps./ I did the same as you, maybe i need to remove the battery or do some diagnostics from the computer ? Thanks.
Not all motors have the EXPW function or the walk mode or auto function. For example the junior size Yamaha models from Haibike and Lapierre. You should ask the store you purchased from to confirm the features your machine should have.
Perfectly explained just what i was looking for, thank you
Glad it helped!
Smashing, thanks, just bought a Haibike Trekking 5 and wondered how to reset the trip counter. Much appreciated.
Glad it helped!
Thanks for the info, just purchased a Haibike Trekking 4 High 500. Have tried it out today and love it, found out a few of these things myself but found your video helpful 👍
Thank you for your kind words! Hope you enjoy your purchase. :)
Thank you excellent clear and to the point
You're welcome!
Great vid, thanks!
Glad you liked it!
Hi, ive got a hardseven 6 and yesterday was the first time ive used it in the dark. When i turned it on i couldn't see the screen because it wasnt lit up. I noticed on the video that that one isn't lit up either. Is there a way to turn the blue backlight on and off?
Cheers
Could be a fault with the led backlight. Best to take it to your local Haibike dealer with a copy of your original receipt if it’s under 2 years old.
I Have an haibike with motor pw-x3, can you explain me please how to use walk mode.
I cannot understand the procedure because my english is so and so. Thank you for the video
If it has this sideswitch control you just hold down the button with an image of someone walking with their bike. The bike will then push itself along. :)
Does this display have an internal watch type battery. The display on my bike is not working properly, dimly lit or doesn't turn on and I've seen where the Model B control has a watch battery but I can't find any reference for the Model A control.
No it doesn’t have an internal battery, it could be the automatic backlight feature that is not working. Perhaps take the machine to be serviced at your local Yamaha Haibike specialist.
Hallo, eine Dragw bitte;, über dem Modus high steht noch expw extrapower, wie kommt man in diesen Modus? Bei meinen haibike alltrail wird es angezeigt u bei meinem trekking bike das auch dasselbe yamaha Display hat, gibt's diese Funktion nicht. Frage mich eben wann das einschaltet o.überhaupt?, doch sonst würde es doch nicht dort stehen bei anmachen des Displays. Vielleicht weiß jemand einen Rat, würde mich freuen. LG aus Hessen 🚵♂️🚵♂️🤙🏼
This means your Yamaha motor is likely not a pw-x3 or pw-x2 version so expw mode is unavailable.
I’ve just bought a new display because my old 1 smashed can u just unplug the old 1 and plug the new 1 in or do u need to buy the cable aswell
They come in a variety of lengths and should come with enough cable and a plug to go into the frame just behind the head tube. The bridging cable from the controls to the motor is normally separate and reused when the controls are replaced. It runs from
The motor where it is plugged in up to the head tube area on the ebike. Here it is connected to the sideswitch controls.
Hi my bike is in metric configuration can you tell me how to change it to imperial please? Thank you.. Paul
On the ODO screen hold down the up and down arrow together and the screen will flash km or mph. Scroll to the one you want then press and hold down to save it. Switch off and back on again and it should now be sorted.
I just got my Haibike trekking 4 and i have an issue with the pedal assist, it works fine for 5 seconds after turning the bike on but then after that it just doesn't work anymore. Any tips?
Lovely bike! I would recommend checking with the shop you got it from, and ask have they serviced it correctly initially. Sounds like a speed sensor error maybe. If you are local to our Shoreham store bring it down for a service. Hope that helps.
Is there an app I can connect to the bike?
No, this system is all built into the ebike so no third party apps capable of connecting as I understand it.
Can you use the usb port to charge things like iPhone or bike mount light?
Great question! The port does not currently support charging/powering external devices. The Interface X, Display B & C do have this functionality.
Is this Yamaha Side Switch Type A water resistant / waterproof ?
I cant find info... do I need transparent cover or not ?
It isn’t waterproof, it is water resistant and best to be able to ‘breath’ to let condensation evaporate, so I would avoid covering it.
Thank you very much for the info
No worries!
How do you display the total miles the bike has done
Press and hold the down button for a few seconds and the info screen will change. It will move between range, trip and total distance. Once the info has changed press and hold again to scroll to the next piece of info.
Hi there, I have recently brought 2 kids overvolt's with the pw-te motor they have this display, the walk button doesn't do anything and they can only get assist if they stand and pedal there hardest if they try to cruse along they only get to 5 mph if they ride my wife's trek rail with the bosch motor they can easily do 15mph any ideas? Is there bikes set up wrong?
The junior e-bikes have no auto mode, no walk mode and are limited to 12.5mph instead of the normal 15.2mph. This is to be expected on a junior EBike and is not adjustable after market as I understand.
How do you use the light button
Only works when lights are wired to the motor using the dedicated light cable (hidden with the motor wiring loom cables). Press for on and press again for off.
How do I get display to show mph. I've tried pressing up and down at same time but it don't work? Thanks
Okay, this is from memory so excuse me if I get it wrong: On the ODOMETER screen press and hold both the arrow up and arrow down buttons simultaneously. Try it pressing the buttons closer to the screen and you may find it easier. Once you have accessed the screen kmph will flash, you can then singularly press up or down to get it to change to mph and back to kmph. Once it is on the one you want press the power off button to save. Hope this helps!
Is there a means of checking stored fault codes?
Only by a dealer using the diagnostics software as I understand it. The last three errors are saved on the motor.
What speeds are associated with each assist mode?
15.2mph is the max legal speed with assistance. The assist modes are more about the percentage of assistance based on your efforts.
Mine won’t turn off Anyone know the solution I am taking the battery off at the moment
That sounds like you should take it to an authorised dealer to look at. You may find pressing the on/off button on the battery works.
Hi, is it possible to do a hard reset on these?
No although there are instructions online for opening the built in diagnostic system to clear down error codes as I understand it. We use the Yamaha dealer software though to reset the ebike after multiple faults (as it will likely shut down or have limited power). You could remove the battery, refit it a few minutes later and see if that helps. I have seen some errors on Yamaha resolving from battery removal and refitting. Best to take to your nearest Yamaha ebike dealer if problem persists.
How do I change the setting from kph to mph please.
Okay, this is from memory so excuse me if I get it wrong: On the ODOMETER screen press and hold both the arrow up and arrow down buttons simultaneously. Try it pressing the buttons closer to the screen and you may find it easier. Once you have accessed the screen kmph will flash, you can then singularly press up or down to get it to change to mph and back to kmph. Once it is on the one you want press the power off button to save. Hope this helps!
Range stays on zero in all modes can you help please.
Sounds like you are on trip or odometer and not range. Otherwise it could be a software issue and you may need it looking at by a certified dealer with Yamaha diagnostics like ourselves.
Sir error 12 ebike sduro 2.5 Yamaha any solution
Best to take it in for diagnostics at your local Yamaha specialist. They will be able to carry out cross swaps to get to the right conclusion.
suddenly my bike the EXPW mode does not show. Does anyone know why?
It could be a screen failure, you can test this at your local Yamaha ebike dealer using their diagnostic tool. If it isn’t the screen it may be software related and could require an update once again that is probably sortable with the diagnostic tool the dealer will have downloaded in conjunction with their special dealer key.
Thanks 👍👍
No problem 👍
I have the screen flashing on trip mode how do i reset the computer
Could be a software issue needing diagnostics at your local dealer.
Ah, so that's how I reset the trip counter on my bike, I do not have any manual or guide for the control so I didn't knwo.
Glad it helped!
how to unlock the expw mode
It’s only available as an option on PW-X2 and PW-X3 motors.
Hi, i have a Haibike and i don’t understand why i can’t use the Auto mode or the last EXPW function.
Anything helps./ I did the same as you, maybe i need to remove the battery or do some diagnostics from the computer ? Thanks.
Not all motors have the EXPW function or the walk mode or auto function. For example the junior size Yamaha models from Haibike and Lapierre. You should ask the store you purchased from to confirm the features your machine should have.