So detailed, straight to the point, chilled vibes, and attention to detail .... Good job brother I'm glad that I found your channel I'm actually in the process of a s40 rebuild myself. It's good to have a great reference like your vids ... Keep grinding brother I might need some help down the road... Appreciate your time and effort ✌️... Subscribed
HELL YEA! It was a great experience and oh man! it gets up and goes a lot faster with all new bearings. Please let me know if you need help I can provide some advice!!
Thanks for this video bro, I am going to be replacing the ISB and possibly the rest of the bearings on my B000 here real soon for my Boosted Vitara build 🙂 cheers
Thanks for the video man, shows me some details that other youtubers didn't explain.. My big question is (hopefully the wording is correct) when you are installing the gear stacks, do you need to have the transmission in neutral? Not only where the shift linkage goes but the stacks themselves..? idk maybe there is only one way for the gear stacks and forks to be lined up when it goes back together and the case is sealed up? I just find that when I have everything lined up and put back together, I can go thru the gears and spin the input shaft but when I get to 4th gear the selector ring (on the gear stack) doesn't want to fully go up and into 4th gear.. Sorry this is hard to explain when I barely know what's going on in this damn thing lmao
Hey brother. I'm about to put my transmission back together after replacing the isb, what gear should I be in when is installing the interlock guide bolt? That's the only part that is making me nervous. Thank you for your awesome videos.
The interlock bolt is tricky!! What I did was slowly turn it in by hand with a 1/4in ratchet. While watching on the inside of the trans to ensure it fits in solid. Look closely at my video, along with looking at yours. Put the bolt in and out you'll see where its supposed to seat. Only truly goes one way, trans should be in neutral I guess when you assemble it.
Dude! You just gave the confirmation ive been searching hours for !!! I broke the plastic oil guide plate while pulling the needle bearing out. Come to find out the part is discontinued.. I've seen the next gen has the same part but different part numbers and the dimensions are different. But I see you used it in this video!
Mine has a leak near the speed sensor I have no idea where it comes from the mechanic told me that it comes from the oil seal inside but I can't imgagine that the oil is leaking from the outside near the speed sensor of the tranmission. I wanted to send some pic but I cannot make or private message you. Please help. Thank you so much.
Are the synchros for the y7 the same as the y8? I’m trying to find the rebuild kit and they all say ex but I assume they are the same internally except for the gear teeth count.. any help would be appreciated 😅
Hey man great video I did everything here but when I put it back in the car it whines in reverse and I saw like if it wanted to get stuck while in reverse and idea what it could be?
@@slimesspeedshoptv im not sure it was still on the jack stand when I tried it but I was a loud whine and I saw that the cv axel were kind of getting stuck im not sure if that was normal
@@slimesspeedshoptv yes i did it goes through all the gears and reverse but as soon as I release the clutch in reverse it whines loud and all of this is while in jack stands I didn't put the wheels back on because if there was an error I could fix it I don't know if that make a difference but I also notices while on the jack stands it moves forward in reverse is that normal I don't know if that happens because it was in the air on the jack stands
@@hernanhinojosa6596, in a different video they explained that the reverse whine is due to the reverse gear being a straight cut rather than the angle cut like the forward gears. It's probably loud because you have it out and it's not being muffled by the engine and fire wall.
Did you mesure the thrust clearance for mainshaft and differential ? If so did you use the honda tool to do it ? (The OEM references for those who are curious: 07GAJ-PG20110 07GAJ-PG20120 07GAJ-PG20130 ). Im trying to know if its possible to do it without the honda tools. Great video
Thank you for those numbers. I was looking to see if this was done in the video as well. I'm just going to get the tools myself and follow the service manual.
What country are you in? Certain "assembly lubes" work fine. You could use just engine oil if you had nothing else. You can't order the grease online and have it shipped?
google this my friend! "Bushing Seal Driver Set" for the price I went with the largest kit available. You're gonna thank yourself when you need the size just a liiil bit smaller.
Did you replace the 13 bolts that seal the bell housing to the trans housing ? The head of these bolts look much more solid than the stocks one. May i ask you the reference ? Are they from honda ?
I just took the factory bolt out and went down to my hardware store and bought the same ones. I think I torqued em to like 30lbs so they're not a special bolt!
these transmissions are known to have the countershaft bearing come out, if you watch my disassembly video the bearing was 1/3 of the way out which is why I started this rebuild. Punching the marks into the trans helps mush the metal and keeps the bearing snug in there. I prolly did way too many punches but it looked cool so I did it.
I would be down. My friend did the powder coating for me, I just went to hardware store and bought $20 of all new bolts to seal it up before I blasted it.
It’s been really refreshing finding this channel. Great music, smooth assembly, and a ton of info!
thank you man! enjoy the show
First proper Honda manual transmission rebuild I have watched on the web. Congratulations, and thank you for the quality content.
So detailed, straight to the point, chilled vibes, and attention to detail .... Good job brother I'm glad that I found your channel I'm actually in the process of a s40 rebuild myself. It's good to have a great reference like your vids ... Keep grinding brother I might need some help down the road... Appreciate your time and effort ✌️... Subscribed
HELL YEA! It was a great experience and oh man! it gets up and goes a lot faster with all new bearings. Please let me know if you need help I can provide some advice!!
so much free knowledge ! appreciate your vid !
Thank you very much! :P
Excellent job, congratulations on the cleanliness and care with the assembly. greetings from 🇧🇷☠️⚙️🏁
thanks bud! Glad you enjoyed it !!
The papi Miller playing 😩🤌🏾
I can't believe I can't turn this off... Fun to watch!!
Sick video bro. Thanks for taking the time to share the knowledge!
Thanks for this video bro, I am going to be replacing the ISB and possibly the rest of the bearings on my B000 here real soon for my Boosted Vitara build 🙂 cheers
I like how you installed the transmission. I have some problem with mine i hope you can help me out.
man you are very talented
Fire ass videos man, keep up the good work
thank you bro! Trying to push a lot of random car content so stay tuned !
Thanks for the video man, shows me some details that other youtubers didn't explain.. My big question is (hopefully the wording is correct) when you are installing the gear stacks, do you need to have the transmission in neutral? Not only where the shift linkage goes but the stacks themselves..? idk maybe there is only one way for the gear stacks and forks to be lined up when it goes back together and the case is sealed up?
I just find that when I have everything lined up and put back together, I can go thru the gears and spin the input shaft but when I get to 4th gear the selector ring (on the gear stack) doesn't want to fully go up and into 4th gear.. Sorry this is hard to explain when I barely know what's going on in this damn thing lmao
Dude, that was amazing.
thanks!!
Hey brother. I'm about to put my transmission back together after replacing the isb, what gear should I be in when is installing the interlock guide bolt? That's the only part that is making me nervous.
Thank you for your awesome videos.
The interlock bolt is tricky!! What I did was slowly turn it in by hand with a 1/4in ratchet. While watching on the inside of the trans to ensure it fits in solid. Look closely at my video, along with looking at yours. Put the bolt in and out you'll see where its supposed to seat. Only truly goes one way, trans should be in neutral I guess when you assemble it.
Dude! You just gave the confirmation ive been searching hours for !!! I broke the plastic oil guide plate while pulling the needle bearing out. Come to find out the part is discontinued.. I've seen the next gen has the same part but different part numbers and the dimensions are different. But I see you used it in this video!
Damn slime you a pro (young thug voice) lol
Amazing work! First full rebuild for a d16 tranny i see! Ima be using this video for sure when i rebuild mines!
Mine has a leak near the speed sensor I have no idea where it comes from the mechanic told me that it comes from the oil seal inside but I can't imgagine that the oil is leaking from the outside near the speed sensor of the tranmission. I wanted to send some pic but I cannot make or private message you. Please help. Thank you so much.
I know this video is 3 years old but where did you get the seal driver tools?
Are the synchros for the y7 the same as the y8? I’m trying to find the rebuild kit and they all say ex but I assume they are the same internally except for the gear teeth count.. any help would be appreciated 😅
Hey man great video I did everything here but when I put it back in the car it whines in reverse and I saw like if it wanted to get stuck while in reverse and idea what it could be?
mine whines in reverse too but work perfect, does it work fine?
@@slimesspeedshoptv im not sure it was still on the jack stand when I tried it but I was a loud whine and I saw that the cv axel were kind of getting stuck im not sure if that was normal
@@hernanhinojosa6596 ill need a little more info to really help... maybe you installed the shift forks incorrectly? Does it go through all the gears?
@@slimesspeedshoptv yes i did it goes through all the gears and reverse but as soon as I release the clutch in reverse it whines loud and all of this is while in jack stands I didn't put the wheels back on because if there was an error I could fix it I don't know if that make a difference but I also notices while on the jack stands it moves forward in reverse is that normal I don't know if that happens because it was in the air on the jack stands
@@hernanhinojosa6596, in a different video they explained that the reverse whine is due to the reverse gear being a straight cut rather than the angle cut like the forward gears. It's probably loud because you have it out and it's not being muffled by the engine and fire wall.
Nice work really clean
would you share the transmission document? Thanks
Where can I buy the plastic shims amine are completely destroyed
What year Honda did this transmission come off of? and What's the difference on the other Desires transmission s...?? Thanks!
Looks like candy 🤩 v nice
thank you boog! thank you!!
That was perfect and the cleanes great video keep up the good work 👏
Great video!
thank you!!
Did you mesure the thrust clearance for mainshaft and differential ?
If so did you use the honda tool to do it ?
(The OEM references for those who are curious: 07GAJ-PG20110 07GAJ-PG20120 07GAJ-PG20130 ).
Im trying to know if its possible to do it without the honda tools.
Great video
no I just put it all together. The only thing I changed was the diff so I did check that clearance between axle seal and bearing. Was all good.
Thank you for those numbers. I was looking to see if this was done in the video as well. I'm just going to get the tools myself and follow the service manual.
@@seekerofthetruths step by step. I spent so many hours going over the manual before picking up the wrench. Hopefully this video can help you!
I have a hard time finding white lithium grease in my country. Is there any alternatives to lubricate oil seals ?
What country are you in? Certain "assembly lubes" work fine. You could use just engine oil if you had nothing else. You can't order the grease online and have it shipped?
What is that tool that you used to punch the barings in with? It had numbers on them..
Tell me a time stamp to stop at and I can tell ya, I use a lot of different tools!
Good video brochacho!
thank you sir!
Hi bro, where do I get the manuals you use in the video greetings from Chile
hey man! email me SlimesSpeedShop@gmail.com I can send you the exact document I got. google as all the free shit!
@@slimesspeedshoptv ok brother i will do it right away
Hey bro , amazing job, I need to rebuild my trans, whered you get the paperwork with all the specs
Great video man 👏
Can I know what a name of special tool that you use to put oil seal and bearing... please reply🥺
google this my friend! "Bushing Seal Driver Set" for the price I went with the largest kit available. You're gonna thank yourself when you need the size just a liiil bit smaller.
Did you replace the 13 bolts that seal the bell housing to the trans housing ? The head of these bolts look much more solid than the stocks one.
May i ask you the reference ? Are they from honda ?
I just took the factory bolt out and went down to my hardware store and bought the same ones. I think I torqued em to like 30lbs so they're not a special bolt!
Part number for the axle seals ?
So is there a shim between the differential the trans housing?
Do you need to use that specific locktite? Or can I use regular red locktite
Where did you get the rebuild kit and the breakdown sheets from?
Why did you hit marks at 4:12?
these transmissions are known to have the countershaft bearing come out, if you watch my disassembly video the bearing was 1/3 of the way out which is why I started this rebuild. Punching the marks into the trans helps mush the metal and keeps the bearing snug in there. I prolly did way too many punches but it looked cool so I did it.
Excelente
Gracias !! :D
So you rebuild for people
Or a snap ring?
hey man I'm curious, how is that transmission holding up since?
cheers 🍺
Un video colocando aceite
obrigado!!
Shit can I send mine to you
I would be down. My friend did the powder coating for me, I just went to hardware store and bought $20 of all new bolts to seal it up before I blasted it.