AMR Turbo installed and Dyno Tuned - TURNED ALL THE WAY DOWN
Вставка
- Опубліковано 1 жов 2024
- automafiaracin...
amr turbo installed and dyno tuned TURNED ALL THE WAY DOWN
Buy Your Performance Parts From the Mafia: automafiaracin...
Facebook: / automafiaracing
Instagram: / automafiaracing
We use UA-cam Buddy to help our Channel: www.tubebuddy....
#AutoMafiaRacing #PartsPassionPerformance #AMRorDIE #MafiaTuned #VeteranOwned #JoinTheFamily
Auto Mafia Racing LLC, and Auto Mafia LLC are in no way telling you to attempt these mods, or to drive, or do what we do. Please consult a professional mechanic prior to doing any work on your vehicle. We will not be held liable for any actions taken due to the viewing of these videos.
Tags: Auto Mafia Racing Auto Mafia Drag Racing Parts Passion Performance Dyno Tuning auto mafia racing,auto mafia,parts passion performance,dyno tuning,drag racing,mafia tuned,turbo v6,auto mafia racing tune,amr turbo kit,turbo v6 mustang 3.7,v6 mustang turbo kit 3.7,ford mustang 3.7 v6 turbo,single turbo v6 mustang,turbo 3.7 mustang dyno,amr turbo kit 3.7 mustang,is it safe turbo a 3.7 mustang,daily driver,daily driver turbo v6 mustang
Hell yeah brother, love to see people living my dream. Did a lil more research and imma save up a bit and get this mf kit.
Do it
Max hp on 93 octane gas ?
600+ rwhp and tq automafiaracing.com/collections/turbo-kits
Just for the people that live in smog required states/areas , do you think you could take one of the Catted Y pipe turbo cars and test it to see if it will indeed pass a smog test , that DOESNT require the sniffer that California uses? Id be very interested in that and im sure other like me would be as well 👍
I am the owner of the first ever EPA approved mustang. My tags actually expire pretty soon and so I will be getting my emissions tested. I’ll respond to your comment here when I get it done and let you know how it goes. So far I am in love with the kit, it’s been an absolute blast.
Not entirely sure since we dont have smog testing here, but it will vary state by state.
You would need to have all 4 o2 sensors installed and working. Im sure we can make the car idle correctly to pass and it has an epa approved catylitic converter so why not.
@@noahjohnson3285 , Sounds good man , I appreciate it 👍
Nice work, exhaust sounds terrible though. Love my n/a full exhaust
Lol all exhaust sounds terrible on decel on our dyno. Its just the metal
It's hard to get higher than 91 over here :/ how much this kit could get on 9/10 psi?
We can still make 500+ on 91 octane, we just have to add more boost.
How much power can be pushed with the built 3.7’s?
No built 3.7s have lived very long. We are going to see if a rods and piston build will live to 800 rwhp or so, then sleeve a block and go further.
@@automafiaracing , What is the most common 3.7 engine failure you see?
Anyone find a decent exhaust setup on this yet? I LOVE the kit but Im trying to keep the raspy bees note down. WIsh i could keep the toned sound of shorties oof
Don't judge by the sound on the dyno. Even big blocks sound raspy
How much out the door is this setup? Is this available for a 2013 v6 convertible automatic? I like the conservative tuning for daily purposes as well!
Yes it is available. 📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
Approx how much to ship a car to you guys from Los Angeles CA?
Probably $800-$1200
@@automafiaracing ok cause I rather get my stuff done right the first time rather than risking it out here
Good point. Ship her on over.
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
That flow master kit sounds good way better then many other kits more bass and deep sounds then raspy crackles adult exhaust
Agreed. The roush mufflers are not our fav
Would this setup work for a 2015 Ford Taurus 3.7?
Probably with some adapting
@Auto Mafia Racing How long do you think a kit like this could hold up on a 2012 mustang 3.7 that’s daily driven currently at 140,000 miles?
The kit will last a long long time. We have turbo cars with over 200k miles
Can’t wait to get a kit for mine, how much does the full kit and install cost?
@@automafiaracing I love miles 🤣
That’s perfect H.P for me, I daily drive my stang.
Piece of cake
@@automafiaracing I need to get my car to u guys.
Yeah 450 is perfect. You’re gapping 5.0s at that level.
How much does this kit cost
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
Can’t wait to see this car in the future !
Its going to be awesome.
I'd like to see the weight of these cars with the kit. I boosted my coyote and it felt like it weighed 5k. I'd drive one of these v6s if I could get at least 500 rwhp
Our engine bay kits easily make 500-600 rwhp. And the kit weighs 125 lbs
@@automafiaracing k member and front core support could help negate some of that and just about break even.
Do the S550s have a MAF sensor?
No they have a MAP sensor in the intake.
@@automafiaracing That's speed density right? Do you think one is better than the other for tuning or performance?
Its 5.0 think ik who own this car dont live far from him
It's a 3.7.
Its a 3.7L V6