Thanks for sharing. Parametric design is perfect. I should stop making paper drafting and go try digital. Water sprayer is a great idea. Stitching and edge finishing tutorial is so clean and understandable. As an hobbyist, i learned and use these techniques a few years ago still find the video enjoyable for me. Every second of it is enjoyable and full of valuable information. I should say this is the one ultimate leather works tutorial to cover nearly every aspect of this craft. Never stop being yourself. Thanks again.
Well looky looky who that wheel picked Rob. It actually picked my comment below yours, but that’s cool. Which one do you want? Shoot me an email (on the about page of my channel) and I’ll ship it out to you! :). Cheers Rob!
Just found your channel. Love all your designs and info. The wife will not be happy when she sees the delivery guy coming - at least until she sees what i made. Thanks.
Hi, that magic wheel picked your comment! Tell me which one you want and I will send it out to you! You can shoot me an email on the about page of my UA-cam channel! Thanks!!!
when turning at corners, do not use a diamond punch, but use an ordinary awl by stretching a simple hole. Also do not use a die-cut punch, make a hole in the corner only with an awl. in this case, after the sewing, the rotation will look more neat.
@@ThisIsHowIMadeIt Whe do it because the leather would not rip in the round corners. And with a round hole in the corner you can make always the same stitch in the corners. So if you see the front of the wallet the corners are always symmetrical. Al this is in the case for those small wallets. If you have longer corners with 3, 4 or more diamond holes you can use the diamond. In the small corners you have to turn to fast. I hope you understand my native language is Dutch. Greetings from the Netherlands
@stefaandeconinck1531 I do! Thank you for the tip! I do think the computer does a good job at “following” the path. If the path is long, it may be several holes…. If it’s short it may be a single but it would be turned correctly. I can definitely see the benefit of doing by hand…
Oh, I am a Cricut person. Flirting with getting a laser engraver, though. Is it time to consummate the relationship…? Now I know to use a bit of water when burnishing edges. Thank you! Love the designs. Thank you for sharing.
Very nicely done, I also have an OMTECH but without all of the upgrades. Your review of the XtoolP2 showed a lot of features that I wish I had available. Thank you for the in-depth on making the wallets, I haven’t done any leather work yet. I have downloaded a design for a no sew leather bag that will be my first project. I have been making leather labels for my wife’s bags and have always had trouble cleaning off the soot, l will now finish that first before engraving. Thanks for the tip.
I sure have been wanting a good pattern for wallets men will actually use. I appreciate when you make them svgs for cricut maker. I was gifted some real leather that is awesome, but I don't know the weight buy since it's so flexible. I'm thinking it won't be good for this. I love how my key west clutch ended up with some stiff faux leather. Thanks for great patterns and instructions!
You are so welcome! I am serious about circling back and seeing what I can get done on the maker for the stitching lines. If you measure how thick the leather is - there are online charts in mm that will tell you the weight.
I just got my Xtool but been sicker than a dog and not unboxed it. lol. my GF decided to throw a shoe so it's been quiet, until I feel better to put the belt back on. Ooh, going to grab the skelly design at your shop tho
Just the patterns on the Etsy shop, the artwork I found and either licensed or it was free. Can’t remember, but I don’t put art up on Etsy unless it’s something I made from scratch :)
Thank you. I read from another leather making guy that is better to wet leather and damp with a cloth excess water and to dye the leather after the engraving or cut to minimize burn and odors.
I have seen that from a lot of people - who also frequently wash the leather with soap and water after. Just so much easier to finish the leather first....
Have you found any replacement bottles for the sprayer you got? I know you said you had three so you probably don't need a replacement. I was getting ready to order it and did not see a replacement as an add-on. Always a great vid.
Just saw this sorry. I have not seen replacement. And I just checked and the price of those things have gone way up and most are out of stock…. I’ll have to look for other options and try something else…
I have 2 major issues with using a laser to cut out patters, maybe you can help me with them. My first issue is using lighter color thread to stick up the project. Because of the char in the stitch holes, the thread comes out stained as it cleans out the holes. This makes it so I can't use anything but dark brown or black thread, which is a real bummer. The other issue I have is, the first thing people do with leather goods is immediately smell them to get a whiff of that great leather smell, however when using a laser all they get is that horrible burnt flesh smell that we all know so well from using a laser on leather. Have you noticed either of these issues, and how have you overcome them?
I have been using a 20w diode over the last several weeks and it works great. I’m sure it would work…. Would recommend keep your leather thinner, maybe a 4oz max for clean 1 pass cuts
As I get older I am becoming increasingly appreciative of genuine hand-made stuff. Fantastic vid.
Thank you very much! I agree!
Your first new video since I subscribed. I am not disappointed! 👍🏼
Thank you!
Thanks for sharing. Parametric design is perfect. I should stop making paper drafting and go try digital. Water sprayer is a great idea. Stitching and edge finishing tutorial is so clean and understandable. As an hobbyist, i learned and use these techniques a few years ago still find the video enjoyable for me. Every second of it is enjoyable and full of valuable information. I should say this is the one ultimate leather works tutorial to cover nearly every aspect of this craft. Never stop being yourself. Thanks again.
Thanks so much!
As always Tim these are amazing
Thanks Rob! I hope you win :)
Well looky looky who that wheel picked Rob. It actually picked my comment below yours, but that’s cool. Which one do you want? Shoot me an email (on the about page of my channel) and I’ll ship it out to you! :). Cheers Rob!
Great video Tim! Cool designs - especially the skulls!
Thanks Andrea!!
Thank you for sharing. I've always assumed the kerf of the laser would be too much for stitch holes but great to see its possible
Seriously SO much great info, even if you aren’t using a laser cutter. Thank you for sharing!
Thank you! The UA-cam algorithms did not like it :)
Those are awesome brother.. Very good detailed information... Glad to see u back keep it up brother....
Much appreciated
Beautiful work. Can't wait to get my laser!
This was a very good video. Packed with a lot of info. Thank you for explaining how you do your work!
The detail on these is amazing. Thank you for the step-by-step instructions on how to design!
Just found your channel. Love all your designs and info. The wife will not be happy when she sees the delivery guy coming - at least until she sees what i made. Thanks.
Careful, my wife’s closet is absurd now…
Another awesome step by step and detailed instructional video for very marketable products. Thanks for sharing your talents.
Glad you enjoyed it!
Hi, that magic wheel picked your comment! Tell me which one you want and I will send it out to you! You can shoot me an email on the about page of my UA-cam channel! Thanks!!!
when turning at corners, do not use a diamond punch, but use an ordinary awl by stretching a simple hole. Also do not use a die-cut punch, make a hole in the corner only with an awl. in this case, after the sewing, the rotation will look more neat.
Love your work. This is the 3rd of 4th pattern set I've bought. Your video's are great and very helpful. Thank you for what you do.
Thank you very much!!
Excellent tutorial!
Hi there, about the diamond stitch, I am a saddler and work always with diamond stitches. You beter use a round hole in the corner.
Interesting…. Why is that?
@@ThisIsHowIMadeIt Whe do it because the leather would not rip in the round corners. And with a round hole in the corner you can make always the same stitch in the corners. So if you see the front of the wallet the corners are always symmetrical. Al this is in the case for those small wallets. If you have longer corners with 3, 4 or more diamond holes you can use the diamond. In the small corners you have to turn to fast. I hope you understand my native language is Dutch. Greetings from the Netherlands
@stefaandeconinck1531 I do! Thank you for the tip! I do think the computer does a good job at “following” the path. If the path is long, it may be several holes…. If it’s short it may be a single but it would be turned correctly. I can definitely see the benefit of doing by hand…
Oh, I am a Cricut person. Flirting with getting a laser engraver, though. Is it time to consummate the relationship…?
Now I know to use a bit of water when burnishing edges. Thank you!
Love the designs. Thank you for sharing.
Thank you! The software for xtool is very similar to design space. I think every Cricut user is on some path to a laser :)
Very nicely done, I also have an OMTECH but without all of the upgrades. Your review of the XtoolP2 showed a lot of features that I wish I had available. Thank you for the in-depth on making the wallets, I haven’t done any leather work yet. I have downloaded a design for a no sew leather bag that will be my first project. I have been making leather labels for my wife’s bags and have always had trouble cleaning off the soot, l will now finish that first before engraving. Thanks for the tip.
Thank you! I think that is a lot of peoples first leather project! Send pictures when you are done!
I sure have been wanting a good pattern for wallets men will actually use. I appreciate when you make them svgs for cricut maker. I was gifted some real leather that is awesome, but I don't know the weight buy since it's so flexible. I'm thinking it won't be good for this. I love how my key west clutch ended up with some stiff faux leather. Thanks for great patterns and instructions!
You are so welcome! I am serious about circling back and seeing what I can get done on the maker for the stitching lines. If you measure how thick the leather is - there are online charts in mm that will tell you the weight.
I love your wallets! Nice colors!
Great Video, I like all the detail. I need to get a xTool P2 laser.
There is a discount code in the description if you do…
Awesome job on instruction. I have also wanted to work with leather.
Go for it!
Thanks for the Video. Great Work!!!
Thank you too!
Have you thought about a pouch design? For renaissance fair or medieval look. Thanks
Great video. What brand of denatured alcohol do you use? Thanks for sharing!!!
Whatever was available on Amazon actually. No preference. Seems to work fine
Which stitching post or pony, on Amazon, do you recommend?
Great videos. Well explained.
How thick of Veg-tan leather can that P2 cleanly cut through? Will it go through 8-10oz with a clean cut?
Easily
I just got my Xtool but been sicker than a dog and not unboxed it. lol. my GF decided to throw a shoe so it's been quiet, until I feel better to put the belt back on.
Ooh, going to grab the skelly design at your shop tho
Just the patterns on the Etsy shop, the artwork I found and either licensed or it was free. Can’t remember, but I don’t put art up on Etsy unless it’s something I made from scratch :)
Thank you. I read from another leather making guy that is better to wet leather and damp with a cloth excess water and to dye the leather after the engraving or cut to minimize burn and odors.
I have seen that from a lot of people - who also frequently wash the leather with soap and water after. Just so much easier to finish the leather first....
Have you found any replacement bottles for the sprayer you got? I know you said you had three so you probably don't need a replacement. I was getting ready to order it and did not see a replacement as an add-on. Always a great vid.
Just saw this sorry. I have not seen replacement. And I just checked and the price of those things have gone way up and most are out of stock…. I’ll have to look for other options and try something else…
Can any of your leather designs be cut out with a 20 w diode
I’ve seen plenty of people cut leather with diodes…. No direct experience tho…
I have 2 major issues with using a laser to cut out patters, maybe you can help me with them. My first issue is using lighter color thread to stick up the project. Because of the char in the stitch holes, the thread comes out stained as it cleans out the holes. This makes it so I can't use anything but dark brown or black thread, which is a real bummer. The other issue I have is, the first thing people do with leather goods is immediately smell them to get a whiff of that great leather smell, however when using a laser all they get is that horrible burnt flesh smell that we all know so well from using a laser on leather. Have you noticed either of these issues, and how have you overcome them?
Do you think this could work on a 10W diode laser?
I have been using a 20w diode over the last several weeks and it works great. I’m sure it would work…. Would recommend keep your leather thinner, maybe a 4oz max for clean 1 pass cuts