Laterally POPPING OUT Dents! | Done Same Day!
Вставка
- Опубліковано 15 жов 2021
- Today in San Jose California I'm using PDR and collision procedures to remove a dent from a Toyota Camry. Repairing a panel with lateral pulling tabs to save the customer money and reporting a claim on his insurance. The dent done the same day.
Training Email Me
tinyurl.com/36529zkp
PDR Training secretpdrpaintlessdentrepairtr...
Collision Tools
pdr-training-tools.com/en/
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-paintless-dent-...
dentdiscountmobileandbodyshop...
www.yelp.com/biz/dent-discoun...
www.yelp.com/biz/dent-discoun... - Авто та транспорт
I could watch this video 100 times and have all those tool snap still not get anywhere close to that result. This takes a VERY skilled eye to know the angles to pull, how hard to pull, where to hammer, ect, ect. Extremely skilled art here. You can tell this dude has been doing this for a very long time.
The Swiss watch makers of the bodyshop world.
it's a hoax sheet metal does not shrink without extreme heat this guy is playing you his just out to sell tools that even if u buy, u cannot achieve that level of perfection.
😭@@mashamambea5704
This shop is a couple of miles from me and I've used it twice. Both times produced good results. There's this pesky pillar in my condo's parking garage. Anyway, what a surprise and joy to see this on UA-cam. He really is that good. Take it from a customer.
Super result. How is this even possible to repair ??? I am shocked by the result of the work!!! You are a super master... I'll never be like that. Thanks for the repair reviews. I watch and learn. 👏👏👏
Thank you
I've been doing pdr since the early 90s and I've NEVER seed a master like you. You have mad skills my friend.
Really good body workers are honestly like magicians.
Thank you for your comment
I could've painted a new fender and blended the door multiple times in the time this job took. Still incredible to see dents manipulated by hand and the end result speaks for itself. Impressive sir.
That is just the paint though, the dents are going to have to come out either way
Thank you for your comment
@@greengoat5654 dood body men. buy new parts lollll
Yeah, but now you've got a paint system that is different from factory. You may have to blend into the bonnet or risk a mismatch. You've also got to remove door top trim (with risk of rippling it) and handle (or mask around and have lacquer peel later) and soft mask the lacquer all around the door. You've also got to rust protect the inside of the wing and align for all gaps. Then in three years time your paint blend will start to show because refinishing paints are literally a different product to production paint. Then you've got the cost of the wing (assuming it's available), time off road, energy costs for your oven and environmental costs. Most of all, the value of the car after this sort of PDR to this quality is completely as it was the minute before the accident. A multiple painted car is never as nice and therefore never worth as much as something with 100% factory paint.
I'm not even a dent remover type dude, but I love watching these videos. Always shocked at how good his results are.
No doubt this is mostly skill, but having the right tools is what it's all about. 👍
such wise words , you should buy a steinway grand piano , obvious you can play like a master
All said and done, most of the tools on display here are his own builds.......ll
This dude can "read" the twisted metal like I would read "Fun with Dick and Jane". 🤓
i have watched a few of your videos now. REALLY IMPRESSED with the quality of the repair and your work. its really good.
Great work Clark! glad to see you are still smashing those dents out of the park, no dent has a chance going up against your skills. 💪👊
Thank you Jake for stopping by I appreciate all your comments.
How’s the dent business going on your side of the planet?
@@DentDiscountPDRBodyShop Unfortunately I've been unwell since Dec 2020 but hopefully now back on the mend, most of my customers are prepared to wait for me, so I think I will be pretty busy when I get back!
All the best, you are doing some amazing work that is very entertaining to watch. Keep safe 😉
Wow my friend!!
I’m glad to hear you’re back on the road to healing up.
I’m 52 I’m paying closer attention to my stress and eating habits.
I am big on the placebo effect how you can trick your body into health.
You take good care stay in touch.
9
@@DentDiscountPDRBodyShop Yes, you look after yourself, this trade certainly takes it out on your body. Looking forward to watching your next challenge, catch up soon! 😉👊
That was a nice job you did, I'm just getting into this art, I was recently introduced to it and I was amazed by all the different techniques there are I'm lucky to have an old car here to make dents and practice on, it's amazing. Keep your crowns down and the lights on. Cheers from Jacksonville Florida 🌞
Right on James thank you for your comment
You been gone a while! It’s great to see you back! Blown away by this one ☝️ yet again you have accomplished a level of PDR that others wouldn’t touch! Class!!
Thank you I really appreciate that
I love that you are helping to save the planet by not fitting a new panel, not using paint and other things. Its just your skill and time and some glue. This is a fantastic method.
Thank you
That voice:
"Welcome to America's most wanted."
This is really amazing work, saving materials in the process. I enjoyed the video!
Amazing work! Thats true craftsmanship there, and it seems to be a dying art. Most shops around here would have replaced the panel and not even tried to fix the dent. You're a magician!
Awesome , missed you brother , welcome back
Missed you to my friend. Thank you for your comment
@@DentDiscountPDRBodyShop
How can one get these tools to buy?
Manofsteelpdr.com
The tools are on my website
Thank you for subscribing
I appreciate your comment
This is awesome. PDR can be hit or miss, in terms of price and skill. This guy takes his time to get great results. This takes a lot more skill than just to replace the panel and repaint. Might even be able to airbrush the remaining paint scuffs.
Dude the paint came off on the fender so they need to paint the door fender hood so can match the color is Pearl
You’re a master of the trade. Very impressive to watch 👍
Been watching you for a year learned so much thank you so much!
"I'm placing one hand on the handle and the other close to the tip.Leading, guiding the tip on every remaining low spot" - legendary words by the man of steel.
I can't believe the result!!!👏🏻 Amazing and skilled work!
Even if I had all those tools, couldn't get the result of this master - not even close.
It's a hoax sheet metal stretches on impact without heat it can never shrink back.
@@pcm7315 I agree, I couldn't either. Ken is the Picasso of PDR.
BRAVO, BRAVO, as usual totally awesome work. Perfection at it" s finest.
I run a fleet of cars on Turo and Getaround. I have been watching your videos and repairing the dents on all of my cars by myself lately. I'm not doing a very good job to be honest. But every time I do a better job than last time. I hope to be able to do it as good as you 1 day. Thanks for your videos.
Your welcome
Amazing work dude. I appreciate you for your work.
Wow! I'm a body tech over in North Carolina, and watching you work really has me itching to stock up on pdr tools and chase that paper! Keep up the good work 💪🏻
“Chase that paper?”
@@carpballet Money is made out of paper.
I’m in North Carolina can u fix mines ?
Trabalho espetacular. Está de parabéns. Muito bom. 👍🏾👊🏾
Every time I see your dent challenges i think there is no way. You impress by fixing the mess every time in the end.
I love these videos. You are by far the best PDR guy on UA-cam. I can fix some pretty bad damage, but nothing like you can. 💪😎🇺🇲
Thank you Ice Age I really appreciate that
Great to see you fit and well, been missing your awesome videos
👍😎🤘
Thank you my friend I really appreciate that
Sem palavras.vc está de parabéns!👏
nice to c u come back. another wonderful job.
I am 73 years old and need to make a extra income. I have really enjoyed your programs.
Thank you Wayne for your comment
Esse metal é alumínio ? Parabéns pelo trabalho 👏👏 excelente ✨
Insane!! This is a true art!!!
@Ezell Broome wtf are you talking about?!?
Brilliant to watch, nasty dent which normally would have been a wing replacement. Excellent skill you have, fantastic result, great video, Alex.
Thank you Alex for your comment
Really professional advice and I will say don't do it by yourself if you don't understand this video but if you pay attention you can do it by yourself and be safe
Always wondered how that was done without any body filler ,primer,paint...
Very great work, congratulations Master!!
Bloody brilliant job mate, there would be heaps of panel beaters watching.
Incredible work there, amazing skill and so much better than replacing/painting.
Thank you for your comment
Man you’re work is awesome! I subscribed about a week ago and I’m hooked to your videos. I want to make a business out of this. I just bought some tools and I’m gonna start practicing on my personal cars and friends and families cars that are willing to let me experiment. I’ve been in the automotive mechanical repair field for quite some time but it’s not really doing it for me anymore. I’m ASE certified and completely self taught, my question for you is, should I seek out training or just get straight to it and start honing in my skill? If you do recommend training could you recommend a good program or school? Thanks man keep up the good work!!
Manofsteelpdr.com
If you like one on one training send me an email
Thank you for subscribing
I appreciate your comment
Красавчик 💪
As evry one said I'll replace the wing straight away 😅.
Your skill amazing well done you deserve 5 golden ⭐⭐⭐⭐⭐👌
Thank you for your comment I really appreciate it.
Lots of golden stars very nice
Man of steel.... Your skills are amazing. Great job... Great video and obviously details discussed in video. Thumbs up
the car is made from aluminium foil and plastic.... can't do that with my steel car haha
You do have amazing skills and the turn out is excellent. I have been doing automotive painting from 10 years would replace this fender.Thank you. Is there any way to learn it from you please .Dharmend here all the from New zealand.
Manofsteelpdr.com
If you like to learn send me a message.
I appreciate your comment and question
@@DentDiscountPDRBodyShop I would like to learn and fix my bent fender
I love watching your videos it so satisfying
If I can't do it buy watching your videos I'll message you
The minute that paint was compromised well it will end the same way forever compromised
@@-Nathan87- especially if you live in a winter place where salt roads it's going to rust in a few years
New subscriber. Never seen such a simple and efficient dent repair on such a complex panel. Impressive!
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Definitely a great job, Marstro, I follow you from Hermosillo, Sonora, Mexico, I also do work here, and we never stop learning, ... congratulations! a hug 🤗
👍👍👍👍👍
It's like watching Bob Ross for me. I can't take my eyes off and am amazed at what you can do with the dents... Thanks
Thank you for your comment
Absolutely beautiful work a true craftsman thankyou I hope you are well compensated
Thank you Mel for your comment
Great Work! I’ve been a Bodyman/Painter since 1980 ! And to think the Bondo and puddy I could have saved using this method! 🇨🇦👍
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
gran maestro , admiro su trabajo y gran capacidad para realizar los trabajos , ,,, felicidades maestro ..
Great job! It's amazing the amount of steps that were cut out on that repair. Just cost of the calibration on the front camera if the front bumper came off, the r&I functions, the fender cost, paint and blend time on the tri-coat, etc. I hope you made that money!
Thank you for your comment
I do auto body repair but I've been getting into these Paintless Dent repairs with glue tabs so I am a new subscriber
Welcome to my channel thank you for subscribing
I have been in body shop for 5 years now I can't wait to get in to dent pulling I love it
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Man of Steel at it again! Loving it bro!
Thank you Jeremy I really appreciate all your comments.
First time subscriber and I like the work you're doing it looks real nice and clean lines
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Just had a dent fixed on my car and this video came up in my recommended. Awesome to see how you do this and had to subscribe!
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Thank you for all! There is many thinks to learn.
Thank you for your comment
You have a gift when it comes to PDR.
Well done Sir!
Thank you David I really appreciate it
Tools. Patience. Experience. Artist.
In the order of difficulty.
Love your professional workman ship and attention to detail. I have a nice hit and run car park dent in my rear passenger door. Willing to try to fix.
Thank you for your comment
Hi there I've been a panel beater for more than 20 years and that would of been a new panel all day, I'm amazed that you got the damage out that good without the paint cracking well done on your skills takes a lot of patience
@Ezell Broome you have the wrong person
Cool name and some of the most awesome pulling I’ve ever seen.
Fyi out there if you see a event or go online...porsche...or bmw clubs...paintless dent removal guys are always there...and working..all regions
This was great, not only did it teach but I could watch it in 2x speed and it was normal pace lol
Thank you for your comment
Really amazing repair, Clark!!
Thank you Francisco
I'm new to the channel and definitely new subscriber! Great Work MOS!!!!
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
This is a skill that requires talent. Good job. 👍
New Subscriber. Awesome work! I've been watching your videos and learning a lot! Thanks for all the videos and tips!
Welcome to my channel thank you for subscribing
Am very happy to be on your teaching site,man of steel you really a genius sir
Thank you Noris
Awesome this is body work skills advanced and best way I have ever seen for fix dent like that dent , great work here. Amazing. What about coming at dent from other side , ??? In old cars I used to pound out dents , but this was next level dent repair. Pull the metal as well. Force it back to original shape when fender lines up with door like this. Perfect job. Your a professional bodyman , metal worker and more. Thanks for sharing
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Soy nuevo viendo tus videos, tengo semanas viendo a muchas personas haciendo este trabajo, pero tu eres de los mejores que he visto, un gusto, estoy decidido a emprender en este espectacular oficio, se siente satisfactorio ver arreglada cada pieza, y me enseña que no solo es con abollerias pequeñas, tambien se puede trabajar mas complejo, excelente amigo, tienes un nuevo suscriptor.
Albert thank you for your comment sorry for the language barrier
Sir you're an artist , you really love your work , that's why the results speaks it self thaks for the knowledge you share and the tutorials good luck
Thank you
Man you make it look easy...that is talent... beautiful work
Thank you Ben
Amazing work done
Yeah man I am impressed by that I plan on being able to do just as good at work or even better if that's even possible I'm taking the course for this trade and I'm ecstatic about it thank you for your handy tips and know how. you're a boss! "my hat tips to you"
Thank you Douglas
Thanks for sharing your experience with us and the for nice video there was a lot of useful information, highly appreciate it
Right on my friend thank you for your comment
It's definitely a skill not everyone can learn great work.
Great work. Very impressive
I’m new to the channel. I’m now following and subscribed. Amazing work!!!
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
First time seeing one of your videos. Really cool seeing the work you do. I like how you say Man of Steeeeel.
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
Very nice paint of a car. And it still original.
I'm impressed of your skills!
Man of Steel, thank you for a good job done. But how can one get these tools to buy?
Manofsteelpdr.com
The tools are on this website
Thank you for subscribing
I appreciate your comment
New subscriber here! Awesome work there. I would like to learn this trade soon. Bought a small PDR gun, it does the trick for small dents. But thats about it for the moment. Looking forward to see more videos.
Cheers!
Manofsteelpdr.com
I do one on one training emails on my website
Thank you for subscribing
I appreciate your comment
WOW!
We not Not witnessing a master at work, But
"The Master at Work"🙌🏼🍻👍🏼
Thank you for your comment I really appreciate it
I love your videos and I really enjoy them!In this case I was going just to remove the fender and cost me less
Thank you for your comment
Your skills are on another level, a true master....
Thank you
Your the best I have seen. Wish you were near the east coast. Great job.
Thank you I appreciate that my friend
You are very talented!!! Great job
welcome back bud. Love your vids
Thank you I appreciate that
First time I seen this done. Didn't know this was even an option that you can literally buff that out later:). Impressive mate. Liked and subscribed
Welcome to my channel thank you for subscribing
I enjoy watching your videos and eventually hope to learn PDR
Thank you for your comment
Alway a pleasure to watch a skilled craftsman. Cheers.
Adam thank you for your comment
Great Job!! @man of steel, world class at its finest😎
Thank you Abel!
@@DentDiscountPDRBodyShop what type of glue do you use by the way?
I'm new to your post, just want to say that you did a very good job! Keep it up 😉
Lily welcome to my channel thank you for your comment
Great Job, I Have All The Rods PDR Tools Need The Glue And Stick Ons, Great Job Again,
Manofsteelpdr.com
The glue is on the website
Thank you for subscribing
I appreciate your comment
Amazing work!
Professional work, well done
Your voice and manner makes me wanna jump off a bridge. But i have seen you do this that if i had not seen for myself i would have called you a liar. You changed my thinking and raised my skill. Instead of a stud gun the hot glue has been a game changer for me. Good work