Abu Ambassadeur 5000 fishing reel in a bag how to service and reasemble part by part
Вставка
- Опубліковано 7 жов 2020
- This is the latest project to come into my shop in a parts box. Watch to see ow to clean, service and reassemble this older version of the Ambassadeur reel.
I have been servicing fishing reels for over 20 years and am sharing my experiences here. If you enjoy the video, please like it and subscribe to see more.
Questions? Comments? I reply to all.
Thank you for watching - Dennis
email 2ndchancetackle@gmail.com
www.2ndchancetackle.com
Like us on Facebook at Facebook.com/2ndchancetackle - Спорт
I just fixed my dad's old ambassdeur 5000 with your help from this video, thank you!
Glad to have helped Best wishes - Dennis
I appreciate how you talk the entire time and its always something constructive.
Thank you. I try to keep everyone engaged and talk through what I a doing in case the video does not show it clearly.
Best wishes
Dennis
That was awesome. A bag of parts, I think we’ve all been there at some time in our lives.
Yes we have! Thanks for the note - Dennis
GREAT instructional video!!!!thanks for sharing your knowledge on reel repair, especially on how to put them back together.
YW. I appreciate you note and viewership - Dennis
Found one just sitting around it looked cool thanks
Super vid again Dennis,and nicely shows the importance of both experience and having the schematic.
Every day is a school day on here,I am learning so much watching your channel,keep up the great work,really enjoying it.
I appreciate the kind words. Thank you - Dennis
You are the reel doctor Dennis nice job I enjoy watching you repair these reels reminds me of my dad years ago servicing his penn reels
Glad to help with the memories!
Hi Dennis,
Once again you've shown off your amazing competency skills and an ability to make complicated efforts look easy !! Abu danza !!!
Best Regards,
Cons
Many thanks Cons - Nice road trip pics! Be well - Dennis
Thank you so much been a project I have been meaning to get too. An finally found a UA-cam channel that explained it down to the tee. Being a firefighter we need something that’s firefighter proof haha. Again thank you
Glad I could help! Thanks for the note and for watching - Dennis
Another great tutorial, Dennis! Abu also made a red 5000B during the same time frame. They're similar to this one in the video, except they also have a bait clicker. l have a couple of those and they are excellent light to medium catfishing or freshwater striper setups or carp reels.
Thanks for the added input Chester. You know your stuff. These are fighting reels and can handle a lot for the format. Stay well - Dennis
Thanks for doing this one. Mine was my first ambassador and it doesn't work properly after I serviced it earlier this year. I had the schematic but I think I put something in backwards. I just put it aside out of frustration so now I'm getting it back out to work on again. You are a great teacher. Keep up the good work.
Thanks for sharing. Best wishes as to take it apart again - Dennis
Hi Dennis excellent video. I've been hoping you would make a video of the older Abu 5000. I've been servicing that style for a long time. I have several that I use on a regular basis. They are built like a tank. I got my first one when I was 13 and I still use it 44 years later. You can't get that quality nowadays. Thanks for the video.
The fact that you are fishing that reel 4 decades later says it all. Some of today's reels won't make it 4 seasons - Thank you - Dennis
@@2ndChanceTackle I forgot to mention that it was used when I got it from my Grandfather. I'm sure it was well used at that time.
Hello and thanks for the video I just took apart and cleaned my granddads old abu 5000s. I think he would be proud. I am missing the two screws on the right face and one of the compression washers and handle screw. Any where on the internet where I might be able to pick up these last few parts. Based on the serial number and what I know these reels are all from 1970- 1973ish. Again thank you sir this really made my day!
Check on Ebay for Abu parts. There are folks that take the old broken ones and sell by pieces. I don't know of a steady source for the older reels - Thanks for asking - Dennis
I made centrifugal brakes from a WD40 straw for my Abu 5000d, I did have to bore out the holes a little by hand with a little drill bit so they would slide freely, but they work perfectly and you can also use a plastic handle Q-Tip and you dont have to bore out the hole, but it is a thinner material....just a fyi for anyone out there that needs it.
Great tip! Thanks for sharing - Also - coffee stirrers can work as well. Nice to be innovative! Best wishes - Dennis
Great video. I think the tension caps are on the wrong sides though. The one with the slot has a spring that protrudes and points to numbers on the side plate opposite the handle.
That could be. Mentally I was wondering which went where. Sometimes the schematics are not that clear and you have to go with your best guess - Thanks for the note - Dennis
Great videos it’s nice to see someone that knows about old reels. I just bought Ambassaduer 5000 on eBay and it casts great but will not retrieve with tension do you know what could be wrong with the reel?
Sounds like it could be worn drag washers
I have a 5000 CI think there's a screw in the end of the shaft where there's a eclipse on some other ones I think it needs adjusting but I'm not sure what to do
Yes - the one with the screw on the end is the older version of the reel. The process is similar. I'll bet your reel just needs a good cleaning. You can remove the cover and see if it is dirty or dried with grease. The rest is just a matter of removing the old and refreshing it with new oil.
Have you ever installed new drag washers on a 1960s Abu 5000? If so what washers do you recommend? I recently cleaned my grandpa's reel and the drag is horrible on it.
I've generally replaced them like for like, so I recommend the ones that came with the reel. I believe there are Carbontex upgrades are available. Thanks for asking - Dennis
I’m not sure if I have a 5000 or 6000 series reel. I’m missing the complete worm /guide/ worm cover etc .. question: are what parts reels are interchangeable? Looking for the whole worm guide complete parts .. thanks
No - they differ in length. Best to get a schematic of your reel and the part number and then you can order the replacement part from ereplacementparts.com or southwesternparts.com or check Ebay
Hello Dennis, fantastic video, I have a red 5000. My question is how do you put the tension indicator wire back on ? Do you put it on the shaft first or inside the cap. Thanks
I put it inside the cap with the pointed end facing the spool
Thanks , I went right on.
What do you use for a degreaser or cleaner Thanks JC
I use Penn Rod and Reel Cleaner, Any Penetrating oil, and Purple Magic as well as #Flitz polishes and cleaners
Where/what is a good source to find a right side drag (spool) cap for this same model. Thanks Bill
Try Southwesternparts.com or ereplacementparts.com for the Ambassadeur parts - Dennis
@@2ndChanceTackle thank you
very informative video I have a question though I have the ambassador 5000 and the ambassador 5500 and I've been doing some research and I'm seeing people selling these reals for three to $500 you know just looking around on the internet could you tell me possibly what these reels are actually worth sir and that's taking into consideration with normal wear and tear they have been used and I know they're from the '60s
I think you can do better on the pricing. A good one in nice condition should be more reasonable. Perhaps $100-$150
Dennis
@@2ndChanceTackle can you tell me where I would be able to sell them at
Online marketplaces like Craigslist, Ebay and Facebook Marketplace. In person at Fishing flea markets and speciality fishing events
That seems like fun. I genuinely love taking apart and put back together reels.
Are the silver 5000s with the round side plates normally noisy when reeling? I have 2 that are significantly noisier than my old red. Doesn't seem to cause any performance issues but wondering if I put it back together wrong.
Without hearing the noise, it is tough to say. It is probably worn bearings or dry parts / old grease. If you have used the reels a lot, then it can be plain gear wear. - Dennis
I have a late 50s 5000 that the button will not engage on. Any suggestions?
That is usually due to dried grease or a broken part. My guess is dried grease. Take the side plate off of the reel and remove the handle and cover. Spray the free spool release assembly and everything below the main gear with a penetrating oil. That should free it up - Dennis
@@2ndChanceTackle thank you! I took it apart and cleaned all the old grease out. It really needed a good cleaning I think once I re-pack it with new grease it will probably work just fine. These things were certainly built to last!
I bought a nice cosmetically good looking old ambassador 5000 on ebay I oiled it up with out taking it apart with some penetrating and lubricating oil Gibbs and WD 40 oil and it works but their must be a part missing because the star drag hits adjustment for the clutch adjustment. Such a shame I know some bushing or washer must be missing on the inside. the star drag should clear the clutch adjustment I cannot get the drag to adjust enough to work good either. This is very disappointing.
I also bought a Daiwa millionaire for cheap on ebay too all I did to it was the same just shoot penetrant oil in the release crack and didn't take it apart it works flawless. both these reels are looking nice but the 5000 must be missing a spacer I don't know? I may have to send it to you I don't want to mess this up by taking it apart. Something happened to me and my forefinger is numb for a year now. I cannot hold on to small parts anymore and I used to be pretty decent on working on stuff but not now.
I am tempted to put a washer on it behind the star drag but it might end up destroying the reel?
Sounds like you are missing one or more of the shim washers. You can go ahead and add washers as long as the fit inside the collar. - Dennis
@@2ndChanceTackle Thanks for your reply there is another one I can get pretty cheap but it looks like the clutch is too close to the star drag too? I think Im going to have to take it apart and have a look. Thanks for this video. Seems like if I had a pretty thin brass washer that would fit in side like you said it would work. Its kinda sandy thoughh I might loosen the two slot heads a small amount to crack it open just enough I can spay it out with wd 4o to try to wash some of the sand out of it. I sure dont want it to come all the way apart. LOL
@@2ndChanceTackle I took it apart a few time finally figured out the base drag washer is pretty flat looking and the inside top drag washer on top is gone that would explain why the drag adjustment tightens down too far hitting the clutch adjuster.
@@2ndChanceTackle When I saw the scematic I bought every washer that was missing quite a lot missing two or three metal washers and 3 or four of the drag washers. About thirty three dollars worth of parts.
I have a 6000 that doesn’t cast very far. I’ve cleaned it and oiled and greased it like 5 times and I’m not sure what’s wrong with it
You probably want to change the bearings. They are steel and subject trust, pitting and dirt as they age. That is a top cause of the slow down in casting. If you really want to have fun, change them over to ceramic - Dennis
@@2ndChanceTackle mine only has bushings? Can I upgrade to bearings?? That would be awesome!
You should be le to change those over to bearings. You would just need the size of each. They should be standard.
@@2ndChanceTackle ok i will try to find for info on that
@@2ndChanceTackle 3.175 X 10 X 4 bearings is what I need for my 1969 ambassadeur 6000 and I think boca has them in stock but idk if I should replace just one side or two
do you have any daiwa millionaire reels for sale
I'm sorry, but I do not. They are nice reels and I personally fish one on my go to surf rod for inshore surf casting. Good luck in your search. - Dennis
I looked on a abu garcia 5000 to get a part. My father inlaw give me one. The numbers are left to right. 393942 . Can u tell me what yr?
I'm not sure on that one. That looks like a serial number