I’ve tried mine 10 times and I get it to do everything but go brake/reverse. It’s like the reverse is sending no signal. Getting a full replacement tomorrow! Great video!
I found mine connected Only issue is my AVC is inversed even though my steering isn’t Works fine until AVC tries to intervene at speed quickly leading to the carvdovdonutsvifvicdontvinterviene Debating if I should fix or just put the receiver box in backwards
question when I do this on my kraton 8s with sr61010AT rx I can't calibrate after I bind. As soon as I bind and the pull trigger for full throttle the truck takes off the table. What am I doing wrong? I see that once you did it it didn't move when you were doing the throttle brake and steering
How are you liking the dx5c?? Trying to decide if it’s worth it for my rigs. I don’t care too much about dialing it in, it’s more of a convenience thing
Just put one on my TLR and love it! Great transmitter!!! I don’t use the gyro function because the car runs an straight line so we’ll and handles beautifully.
My DX5C has the steering in reverse for my Kraton 6S as well. I didn't fully follow the instructions binding the controller, I'm new to the hobby. I've been debating on whether going back and doing it over would correct it.
Are you saying your steering is reversed? If so you can change that on the remote in settings. You can always go back and do it again to try and fix it. If you have any questions let me know!
Hello, on your dx5 you want to make sure all the numbers on the remote like the trims are set to 0 if they aren’t 0 it could not work. I would check that and calibrate again!
Hi, do you know which version is installed in your transmitter? When turning it on it says the version and the region (Us or Eu) the manual says that this transmitter is compatible with dsm2 only in 16.5 ms but mine only has 11 and 22 ms and my version is 1.08 Eu. Thanks
I have done this and I'm getting a constant to beep when I fire it on I don't get the startup tones it's a steady to Green flashing and beeping what is wrong with my RC car how did I f*** it up? Lol
Best video for binding my DX5C, short and sweet.
Thank you!
I’ve tried mine 10 times and I get it to do everything but go brake/reverse. It’s like the reverse is sending no signal. Getting a full replacement tomorrow! Great video!
Thank you!
@@justbashinitrc I actually found out I was binding it wrong and your video helped so much!! Everything is running great now!!! Thanks again!
Awesome! Glad you got it!
I found mine connected
Only issue is my AVC is inversed even though my steering isn’t
Works fine until AVC tries to intervene at speed quickly leading to the carvdovdonutsvifvicdontvinterviene
Debating if I should fix or just put the receiver box in backwards
Short and good. Could also show setting steering end-points in another video 👍
Thank you, and yes definitely a good idea!
your supposed to go right then left its in the owners manual thats why yours is backwards,
question when I do this on my kraton 8s with sr61010AT rx I can't calibrate after I bind. As soon as I bind and the pull trigger for full throttle the truck takes off the table. What am I doing wrong? I see that once you did it it didn't move when you were doing the throttle brake and steering
The reason is takes off is cause you aren't in the binding process, im not sure what you are doing wrong.
How are you liking the dx5c?? Trying to decide if it’s worth it for my rigs. I don’t care too much about dialing it in, it’s more of a convenience thing
I love my dx5, wasn’t sure at first when I bought it but ended up really liking it. I have it on almost all my rigs!
Just put one on my TLR and love it! Great transmitter!!! I don’t use the gyro function because the car runs an straight line so we’ll and handles beautifully.
Hero!!!
My DX5C has the steering in reverse for my Kraton 6S as well. I didn't fully follow the instructions binding the controller, I'm new to the hobby.
I've been debating on whether going back and doing it over would correct it.
Are you saying your steering is reversed? If so you can change that on the remote in settings. You can always go back and do it again to try and fix it. If you have any questions let me know!
Also this binding is only for the new avc receiver, if not not a avc receiver it is different
@@justbashinitrc In order for my RC to turn left when I steer left I had to select reverse in the settings
Glad you got it fixed
My Notorious V5 did the exact same thing had to reverse also.interesting
Hi! I tryed it several time. Binding and calibration was done. But i have no throttle.
Hello, on your dx5 you want to make sure all the numbers on the remote like the trims are set to 0 if they aren’t 0 it could not work. I would check that and calibrate again!
Does your avc work or is there additional set up?
Yes my avc works perfect
Hey good video but I also noticed you didn't have to use bind plug interesting 🤔
Yes no bind plug needed on the new receivers
Did you calibrate? I didnt see that part
Yes I did, it’s towards the end
Hi, do you know which version is installed in your transmitter? When turning it on it says the version and the region (Us or Eu) the manual says that this transmitter is compatible with dsm2 only in 16.5 ms but mine only has 11 and 22 ms and my version is 1.08 Eu. Thanks
Im not sure I will have to look!
EU Transmitters do not support DSM2, only DSMR. Might be because of regulations. Thats why we have only 22, 11 and 5.5 ms on some transmitters.
Hola, como se cambia la direcion del servo? Mi emisora dx3 tuerce al revés.
It's is on the dx5 you can reverse the steering
I have done this and I'm getting a constant to beep when I fire it on I don't get the startup tones it's a steady to Green flashing and beeping what is wrong with my RC car how did I f*** it up? Lol
I don’t believe it got bound correctly. What truck are you trying it in?
And also is it the avc receiver?