Thank you for helping keep our boat afloat. See the 👍 button, please consider pressing it as you would be helping us out more than you know. We hope to see you again next week ❤
The captain of Sailing Lucky Fish said that the slime on a hull causes bottom growth to disregard the bottom paint and stick to your hulls. A pressure washer works underwater and can pump salt water to clean your boat. Just purge the pump with fresh water. The pump is usually made with ceramic and doesn't corrode
Would love to have a pressure washer! Would have made the job so much easier! She will be water blasted when she gets hauled out in the Slings for the antifouling early next year. Thank you for watching! Really good to hear people are enjoying the videos ❤️❤️ greatly appreciated 💜
Beached as Bro! My preferred hardstand. I chock for extra clearance, Karcher (which is also desal pump), quick sand/coat/s depending tide. Props are like antifoul debates, interested to see what u pick. Just upset many Parramatta Eels & West Coast Eagles supporters. Recommend lapel/lavalier microphones
👍🏼 you guys would need to Pack those prop hubs with the correct grade marine grease.. ... If you had a grease gun that could lock on or be screwed in under water that might work... but looking at other folks in tropical shoreline waters 3 months between scrape downs and prop checks seems to be about right. ...so get used to drying out ... Look up Mangrove Jack.. his home built wooden cat is a regular as his name implies. Charlie 😂 youve just learnt that some places are very tidal. ... the good news is they are great for building sand and mud pies making channels and digging ponds. And chasing huge numbers of small crab's.
Hey Clive, The grease points take a very fine pointed grease nipple adapter so it may be able to be applied under water. We don't want to have to dry out every 3 months so we are swapping to a softer antifowl and going to try a different brand of props. I feel that the kiwi props don't quite give us enough push and it would seem that we have reached our limit of getting weight off and making this girl lighter. Will do a video on weather it was the right decision or not and let everyone know. I personally hope that it does lol. Charlie is growing up so fast and I am super grateful to be able to spend so much time with her. -sam
Awesome! We have heard mixed reviews with them on far sides of the spectrum, some love them and some have had nothing but dramas, we unfortunately are on the side with dramas. We have heard nothing but great things with the company and customer service but the product is not for us 💜
Poor Charlie , not being able to swim cause the tide ran away. Love the fact you can beach your boat .. great showing what a cat can do that a mono (with a keel) cannot. Thanks for the video, great job.
Thank you! Love to hear people are enjoying videos. Great question. We greased them 5 months ago and they started jamming up 3 months after that. Beaching the boat every three months isn't something that we want to do in order to grade the props to keep them freed up 💜 - Cait
Yeah Im not sure if they're a good thing or not yet ours were 20 years old and still working but needed an overhaul, ive rebuilt them and we will see how they go @@sailingwiththejamess
Wow 20 yes old sound pretty good to me! I feel that with the smaller blade surface area that we just aren't quite getting enough push from them so we are going to try something else. I'll let everyone know how they compare and weather we made the right decision or not. -sam
Cheers for the heads up. Don't have a solid plan yet we do the Kimberleys next yr and then head to indo from there. Then we'll just see who we meet and where we end up. At this stage we are allowing 2 yrs before we start to track west up and into the med
Hello mate I'm John and my wife name is marie the Staples family we just started watching this video it was my first episode I followed your channel we r hooked thank you for sharing your story with us John and marie 😊😊😊
Hi guys, your video brought a smile to my face....especially Charlie. I have been sailing my catamaran around the UK south coast for 20 years. I have been beaching at least twice a year to scrub off and change anodes for all these years. Its getting hard work now I^m in my late 60s but I get help now. My cat is a 12 m Dazcat called Cloud 9. A quick google will give you an idea of what she^s like. I have similar but bigger and deeper fixed keels hence we take to the ground very well without tipping forward too much. I have 30 hp volvo 2030 engines with saildrives. 20 years old now but still going strong. I have volvo 3 blade folding props which have been excellent. Full power in forward and reverse. I have changed the hubs on the props a couple of years ago as i had a bit of corrosion on the splines but i think that was my own fault as i was a bit mean with the grease. Originally i wanted to use Gori folders but after 4 props that vibrated i gave up and went for volvos. Dont go for Gori props....real vibration problems. I also noticed that you scraped your hull clean with scrapers. I scrape but also use a heavy duty scotch brite pad to remove the top surface of the antifoul which removes the depleted biocide layer so you have a fresh biocide rich layer. I use a commercial Jotun Seaforce 90 antifoul which is good for 5 years ....its meant for shipping in continual use up to 20 knots. I have scrubbed the antifoul through to the primer in places but i just use a can of quick drying Jotun Aquiline to touch up...seems to work. Cheers Chris
Hey Chris, Cheers for the advice! I am sort of glad to here the feed back about gori props as we have also found them to be the most expensive 😀. I have herd good things about the Volvo props and I love the shape of them. 5 yrs out of antifowl is amazing! We have just purchased the international antifowl but will definitely look into the jotun option for the slipping after next. -sam
Sam, I forgot one more interesting antifouling snippet. For the last couple of years I have been using a product called Lanoguard which is basically sheep Lanolin with a bit of antifoul mixed in. It's a heavy grease that smells like sheep s##t! I use it as antifoul on my props. I have never ever been able to get any antifoul to stick on props...tried all sorts. I simply get a great gob of Lanoguard and spread it liberally all over the props. It seems to work quite well but the big advantage is you can get a big gob of this stuff and wipe it on the props even when they are submerged. The other bonus seems to be that it provides a very effective anti corrosion layer. My prop anodes this year were virtually completely intact...they usually disintegrate to white dust.
Wow I have just purchased prop one for the new props but I will definitely add lanoguard to the list it would be great to be able to apply under water. How long do you get out of each application? I absolutely love non standard options. -sam
Sam , I began using Lanogoard on my props a few years ago. Originally I applied it all over the existing antifoul on both the props and the saildrives. For several years I topped it up quite frequently as I was on a swinging mooring in Chichester Harbour that dries out every tide hence no problems with access. The lanoguard goes a very long way so one tub is good for a while. A couple of years ago I moved my boat to a pontoon mooring that doesn't dry out on a river estuary on the Isle of wight hence I can't get to the bottom of my boat unless I find somewhere to beach it. I went back to Chichester harbour a couple of months ago which was the first time for a whole year. The props had quite a bit of fouling after a whole year but I could still make 6 knots flat out under engine vs 9+ knots flat out when hull and props are absolutely clean. Not bad after 1 year. I have also tried Duralac as a prop antifoul...chromate paste...worked OK but it fell off the blades. The main problem with most prop antifouls is they need time to cure which is difficult between tides. I try to limit lifting my boat out to once every 5 years and prop antifoul doesn't last that long. I now use Lanoguard products on loads of things...they do a spray which is great for outboards. ...it stops corrosion. I also use Duralac around metal to metal contacts to passify the contact area such as rivets in a mast. Trouble with boats everything above the water wants to corrode and anything below the water wants to foul and corrode!
Hahaha I hear you on that one. Aluminium is such a soft metal. Thank you for the wonderful information. I believe that I will use lanoguard on the moving parts of the prop and prop one on the blades and see how that goes. -sam
Great video! We watched it on a big screen with friends last night right after it came out, which made it all the more spectacular. Love the updates and explanations. Charlie's reaction is priceless. I'm with you Charlie, without all the preamble, I would probably have the same reaction if I just woke up and expected to go swimming. Love you guys.
Love your vids and your boat. My wide and I smile at how cute Charlie is. Thanks for sharing it all with us. She will have a priceless trove of vids of her idyllic childhood. Good onya guys. Fair winds to you.
@@sailingwiththejamess yea. That was it. Tbh I heard it before I started looking at it. They were just stowing sails and heading south. Least I know what to look for now :).
Glad you like the intro! Was super fun to beach her, long day but super rewarding and super fun! Charlie was so c9nfused when she wanted to go swimming and there was no water around the boat 😂 Cheers! 💜💜 -Cait
I have had those for 12 years. There is a complete lack of maintenance, they should be greased as recommended. Put hard anti fouling on them and keep them clean
Hey John you may be right as the last owners didn't go to far for a few years and were living in a marina. I still feel that the surface area of the blades is a bit small for a heavy cat so I'm going to try other ones and do a comparison analysis. I will also completely strip down the kiwi props and give them a good birthday. -sam
No worries! I believe youtube does the translation for the different languages 💜 thank you for watching really appreciate hearing that people are enjoying the videos 💜
Would love to chat with you about that plastic you have on your chain ! In stead or using plastic you can use the metal that chopping blocks are made of . It would ware out far less then plastic that the sun will deteriorate. Now another suggestion for bottom paint. Stop using Anti foul ! Look into Ringo liner . It will help with flotation as well as harden you bottom. Never worry about beaching . Cleaning would be a rag across the bottom and done. Maybe redo in 5 to 8 years .
Thank you! We have the antifoul paint onboard for when we are hailed out next, the great thing about bottom paint is that if you don't like what you have on, you can change it every 2 years 😉 Love learning new things, thank you 💙🤍💙 -Cait
New subscriber for you folks, I like your style, choice of finish her up aluminum Cat, and NO SAIL DRIVES !!!! sail drives should be illegal , lol Best of luck on the prop re-do. Here making my own copper based antifoul... Oh, Max props. OR a Brunton autoprop. Max prop for the money and they do STOP your boat Fast in reverse. Variprop has a really beefy and quiet feathering prop, not sure where the price lies though.
Thank you!! Love hearing people are enjoying the videos. Yes, we are not the biggest fans of sail drives. Shaft drives were on the "strongly want" list when we were looking at boats. This girl's design was for sail drives and the first owners did not want them so when they had her built they had the engines moved to under the aft beds, a skeg designed and shaft drives. The original area for the engines are now amazing storage lockers and tool workshop. The previous owners were awesome and gave us a bunch of photos are her build from skeleton to launch 🤗 💜
I had an old 48ft Crowther and I changed to Seahawk's Autostream props. They were in Victoria but now in NSW. I also changed the starboard output to left hand as I was getting cavitation. The Autostream worked extremely well and one benefit I was most impressed with was that you had the same power in forward and reverse. Very helpful if you need to stop quickly. Also they were easy to install and maintain.
Hi Geoff, cheers for your comment. If you have time I would love to ask you a few questions. What props did you have before the auto stream? Whas there a noticeable difference once changed. Motoring sailing and punching weather. -sam
I had fixed props that were driven by 60hp via shaft drives. I did go a little bigger with the Autostream and I did get better forward motion without cavitation but can remember how much. The power in reverse was outstanding and so much more than with fixed props. I had the Autostreams for 10 years (sold the boat) without a single issue.
Wow that is the best reference ever! I have purchased flexofold props already, they were a bit cheaper, but if they don't work out I'll look at outs stream again. Cheers for the advice! -sam
Thank you!! A time lapse of the boat rising would be great, we will be beaching her again when we get new props and will try to film her floating again! 💙💙
@@sailingwiththejamess Not to mention, a cinematic cleaning video, ASMR scraping, with nice music would make for a very satisfying watch. Think power washing videos :) Best of luck! Subbed!
New to your show so forgive me not knowing how you really use your boat. You say she's heavy. I'm not sure drag on a standard prop would bother you much. Especially if you can find the perfect two blade fixed prop that should tuck in behind the keels.
Thank you!! Love hearing people are enjoying the videos! We greatly appreciate it! Because of the skeg we will have to go 3 blade props, 2 blades will exit and enter the skeg at the same time causing vibration 🤗 We are supposed to be 15 tonne and we are 17. We are doing our best to get the weight off and we are seeing a difference in performance 🙌 but we are not finished yet getting the weight off, hoping to do our best with making her lighter 🤗 but looking at props that have some good push for heavier boats ❤️
We have a friend that fitted acrow props to his monohul to black it and keep it upright. Depending on you underwater arrangements it could be an option for you. Good luck next year. -sam
Here is a Tip use in your Antifouling the hottest Chili Powder you can find, ad that to the paint about 1 Part in 6 or 7 Parts of Paint, the Result will surprise you.
Thank you for the tip! Adding Chili powder has been recommended by a handful of people now, we will do some investigation on it as everyone who has recommended it has said amazing things! 👏🌶 🌶❤️ -Cait
Gori props. Folding, Over Drive, Better Speed in flat water and save fuel. Only negative is they are not that strong in reverse but once you know that, not a prob. Peter A - Smokyjim
Loving the videos! Any updates on how you‘re gonna tackle boat weightloss? As a non-boat owner that watches way to much sailing-tube i was wondering if fuel weight thats below the waterline counts towards the boat weight? Greetings from the Netherlands
Greetings! Fuel weight does count. Specific gravity of salt water is 1.025 and the average diesel Specific gravity is 0.86 so if we go in volume then we still gain some buoyancy when our tanks are pressed. -sam
Yes, Gori props look marvellous, but unfortunately, they are a little out of our budget. We went for flexofold as we felt that they were slightly better value for money. -sam
We used to beach our trymaran at Seabrook Island at our gramps and scrubbed the underside. And do small maintenance and away we went. Not sure why yours are so overgrown this bad after 6 weeks. That's allot we used Spartan Multi-Season Antifouling Paint & Sharkskin Hard BP. On the trymaran.
Hi just watched your video and see you have vivid petit antifoul. We also have an aluminium cat and are about to use the same antifoul, our question is how long have you have this antifoul on for , we were hoping for around 12/ 18 months
It has I high amount of biocides in it which we found works well for about 14 months but then the antifowl is not very soft and we had trouble reaching the speeds required for the antifowl to start to self polish. That is why we are trying internationals version (which is softer) we will let you know which one we find is best. -sam
You are exactly right, We hadn't been there in a long time and didn't know how flat it was, but we put the anchor out just in case. Our plan was to move/set the anchor by hand to check position for best escape route but were lucky we didn't need it. -sam
I looked into it and it would seem that if you pay an environmental levy then it is OK. I fail to see how paying money to the federal government makes a difference to the environment but whatever works I guess. -Sam
Hello! That would be amazing if you did, she started build I believe Feb of 2004, Built in the Gold Coastby MEC. We have pictures of her skeleton from the first owners, we are the second owners of her 🤗
They have the same rating in foward and reverse but due to keeping everything as simple as possible we have decided to go with 2 right handed props. -sam
Hey Mark, Mumbys are great boats, none were for sale when we were looking at boats. We did toss around the idea of building a Mumby 48. Our boat is a Lock Crowther Catamaran, Design 85 Mark IV Absolutely in love with her! -Cait
Started watching you guys.. At first was great! But now uveitis seen 3 episodes..and all 3 are totally devoted to either TALKING about fixing stuff..or fixing stuff.. Sure..give as an idea of what needs doing, but FFS..were here, well I am at least.. to see sailing ! Lol.
Thank you for helping keep our boat afloat. See the 👍 button, please consider pressing it as you would be helping us out more than you know.
We hope to see you again next week ❤
Natural way to work on the hull, not as costly as a crane.
Definitely not as costly, would highly recommend this spot, no rocks and hard pack sand, Windy Bay and Hazelwood Island
💜💜
-Cait
The captain of Sailing Lucky Fish said that the slime on a hull causes bottom growth to disregard the bottom paint and stick to your hulls. A pressure washer works underwater and can pump salt water to clean your boat. Just purge the pump with fresh water. The pump is usually made with ceramic and doesn't corrode
Would love to have a pressure washer! Would have made the job so much easier! She will be water blasted when she gets hauled out in the Slings for the antifouling early next year.
Thank you for watching! Really good to hear people are enjoying the videos ❤️❤️
greatly appreciated 💜
Beached as Bro! My preferred hardstand. I chock for extra clearance, Karcher (which is also desal pump), quick sand/coat/s depending tide. Props are like antifoul debates, interested to see what u pick. Just upset many Parramatta Eels & West Coast Eagles supporters. Recommend lapel/lavalier microphones
Hahaha yes I didn't think about the colours lol. We have just brought some mic 🎤 so hopefully it will get better.
-sam
@@sailingwiththejamess They'll get over it, just like all their losses 😉
We are super excited about the new colours - think she'll look really good with them
🤍
Cait
A hairdryer helps to heat up the glue holding the decals on and also stops them being brittle 👍
Thank you! 💙 we ended up getting a paint scraper from the hardware store and it worked like a dream at getting the other stripes off!
💜💜
-Cait
Cheers guys! 😊
Thank you!!💜💜
You had me in the first minute 😅😅 old mate knew what he was doing
Thank you!! Yes, He definitely knows what he's doing 💜🥰 ❤️
-Cait
👍🏼 you guys would need to
Pack those prop hubs with the correct grade marine grease.. ...
If you had a grease gun that could lock on or be screwed in under water that might work... but looking at other folks in tropical shoreline waters 3 months between scrape downs and prop checks seems to be about right. ...so get used to drying out ...
Look up Mangrove Jack.. his home built wooden cat is a regular as his name implies.
Charlie 😂 youve just learnt that some places are very tidal. ... the good news is they are great for building sand and mud pies making channels and digging ponds.
And chasing huge numbers of small crab's.
Hey Clive,
The grease points take a very fine pointed grease nipple adapter so it may be able to be applied under water. We don't want to have to dry out every 3 months so we are swapping to a softer antifowl and going to try a different brand of props. I feel that the kiwi props don't quite give us enough push and it would seem that we have reached our limit of getting weight off and making this girl lighter. Will do a video on weather it was the right decision or not and let everyone know. I personally hope that it does lol. Charlie is growing up so fast and I am super grateful to be able to spend so much time with her.
-sam
i had kiwi prop on my alu mono for 8 years with no problems.
Awesome! We have heard mixed reviews with them on far sides of the spectrum, some love them and some have had nothing but dramas, we unfortunately are on the side with dramas. We have heard nothing but great things with the company and customer service but the product is not for us 💜
Poor Charlie , not being able to swim cause the tide ran away. Love the fact you can beach your boat .. great showing what a cat can do that a mono (with a keel) cannot. Thanks for the video, great job.
Cheers, yeah Charlie was too funny we tried to explain it to her but she was adamant that she wanted to go swimming lol
-sam
I found this video very cool aswell, we have a mono hull so we can't do this 😅
Yeah we are switching to a softer antifowl so we won't be doing it for to much longer either lol
-sam
@@sailingwiththejamess 👍🐬
💜💜💜💜
-Cait
Great episode. Charlie's look of confusion, priceless 😊
She was so cute Asking where the water was 😆😆💜💜
I have been following MJ Sailing and Mat has discovered a really great, substansule prop for the boat they are building,a 42 foot cat.
Thank you! We will check it out, always interested in learning new things! We have gone with Flexofold Props, excited to get them on!
💜💜
-Cait
we have kiwi props as well, they have greasing points that keep them moving properly and reduce wear and tear, good job with the videos ;)
Thank you! Love to hear people are enjoying videos. Great question.
We greased them 5 months ago and they started jamming up 3 months after that. Beaching the boat every three months isn't something that we want to do in order to grade the props to keep them freed up
💜
- Cait
Yeah Im not sure if they're a good thing or not yet ours were 20 years old and still working but needed an overhaul, ive rebuilt them and we will see how they go @@sailingwiththejamess
Wow 20 yes old sound pretty good to me! I feel that with the smaller blade surface area that we just aren't quite getting enough push from them so we are going to try something else. I'll let everyone know how they compare and weather we made the right decision or not.
-sam
haha, nice one sam, did it my self on the same beach about 20 years back,
Awesome verdo, we are on our way in your direction mate, should be there in a yr or 2, would be awesome to catch up.
-sam
im so jealous, don't rush! south-east indo is stunning!@@sailingwiththejamess
Cheers for the heads up. Don't have a solid plan yet we do the Kimberleys next yr and then head to indo from there. Then we'll just see who we meet and where we end up. At this stage we are allowing 2 yrs before we start to track west up and into the med
Hello mate I'm John and my wife name is marie the Staples family we just started watching this video it was my first episode I followed your channel we r hooked thank you for sharing your story with us John and marie 😊😊😊
Cheers John and Marie we appreciate the support
-sam
Hi guys, your video brought a smile to my face....especially Charlie. I have been sailing my catamaran around the UK south coast for 20 years. I have been beaching at least twice a year to scrub off and change anodes for all these years. Its getting hard work now I^m in my late 60s but I get help now. My cat is a 12 m Dazcat called Cloud 9. A quick google will give you an idea of what she^s like. I have similar but bigger and deeper fixed keels hence we take to the ground very well without tipping forward too much.
I have 30 hp volvo 2030 engines with saildrives. 20 years old now but still going strong. I have volvo 3 blade folding props which have been excellent. Full power in forward and reverse. I have changed the hubs on the props a couple of years ago as i had a bit of corrosion on the splines but i think that was my own fault as i was a bit mean with the grease. Originally i wanted to use Gori folders but after 4 props that vibrated i gave up and went for volvos. Dont go for Gori props....real vibration problems.
I also noticed that you scraped your hull clean with scrapers. I scrape but also use a heavy duty scotch brite pad to remove the top surface of the antifoul which removes the depleted biocide layer so you have a fresh biocide rich layer. I use a commercial Jotun Seaforce 90 antifoul which is good for 5 years ....its meant for shipping in continual use up to 20 knots. I have scrubbed the antifoul through to the primer in places but i just use a can of quick drying Jotun Aquiline to touch up...seems to work.
Cheers
Chris
Hey Chris,
Cheers for the advice! I am sort of glad to here the feed back about gori props as we have also found them to be the most expensive 😀. I have herd good things about the Volvo props and I love the shape of them. 5 yrs out of antifowl is amazing! We have just purchased the international antifowl but will definitely look into the jotun option for the slipping after next.
-sam
Sam, I forgot one more interesting antifouling snippet. For the last couple of years I have been using a product called Lanoguard which is basically sheep Lanolin with a bit of antifoul mixed in. It's a heavy grease that smells like sheep s##t! I use it as antifoul on my props. I have never ever been able to get any antifoul to stick on props...tried all sorts. I simply get a great gob of Lanoguard and spread it liberally all over the props. It seems to work quite well but the big advantage is you can get a big gob of this stuff and wipe it on the props even when they are submerged. The other bonus seems to be that it provides a very effective anti corrosion layer. My prop anodes this year were virtually completely intact...they usually disintegrate to white dust.
Wow I have just purchased prop one for the new props but I will definitely add lanoguard to the list it would be great to be able to apply under water. How long do you get out of each application? I absolutely love non standard options.
-sam
Sam ,
I began using Lanogoard on my props a few years ago. Originally I applied it all over the existing antifoul on both the props and the saildrives. For several years I topped it up quite frequently as I was on a swinging mooring in Chichester Harbour that dries out every tide hence no problems with access. The lanoguard goes a very long way so one tub is good for a while. A couple of years ago I moved my boat to a pontoon mooring that doesn't dry out on a river estuary on the Isle of wight hence I can't get to the bottom of my boat unless I find somewhere to beach it. I went back to Chichester harbour a couple of months ago which was the first time for a whole year. The props had quite a bit of fouling after a whole year but I could still make 6 knots flat out under engine vs 9+ knots flat out when hull and props are absolutely clean. Not bad after 1 year. I have also tried Duralac as a prop antifoul...chromate paste...worked OK but it fell off the blades. The main problem with most prop antifouls is they need time to cure which is difficult between tides. I try to limit lifting my boat out to once every 5 years and prop antifoul doesn't last that long. I now use Lanoguard products on loads of things...they do a spray which is great for outboards. ...it stops corrosion. I also use Duralac around metal to metal contacts to passify the contact area such as rivets in a mast. Trouble with boats everything above the water wants to corrode and anything below the water wants to foul and corrode!
Hahaha I hear you on that one. Aluminium is such a soft metal. Thank you for the wonderful information. I believe that I will use lanoguard on the moving parts of the prop and prop one on the blades and see how that goes.
-sam
Maybe you could check with Sailing Dauntless and ask them what props they use . They also have a counter rotating set up too.
Thank you for that! Will check them out! 💜
@@sailingwiththejamess you are welcome
💜-cait
I think i seen this on “dreamtime sailing”? The good new is, doesn’t look like she’s dragged at all.. (mr positive) 😊
Before anyone comments “they did it intentionally” i made this ⬆️ comment in the first 1 minute.. so yes I’m aware..
Hahaha cheers trev, I was thinking Rob and Caren are way to good to get caught out and yes you are right the anchor did not drag lol
-sam
Great video! We watched it on a big screen with friends last night right after it came out, which made it all the more spectacular. Love the updates and explanations. Charlie's reaction is priceless. I'm with you Charlie, without all the preamble, I would probably have the same reaction if I just woke up and expected to go swimming. Love you guys.
Thank you!!
Charlie was very cute asking where the water was with all her swim gear on 💜😆 she had a blast playing and making sand castles 😎
Love your vids and your boat. My wide and I smile at how cute Charlie is. Thanks for sharing it all with us. She will have a priceless trove of vids of her idyllic childhood. Good onya guys. Fair winds to you.
Cheers, fair winds and following seas
Thought I had run into you guys this morning at South White Cliffs but alas not. Was a big Ally Cat sitting on Anchor.
That's at Fraser Island, which ally cat? Would that be NooraMunga? They look almost identical, grey sail bag and uv strip
💜💜
- Cait
@@sailingwiththejamess yea. That was it. Tbh I heard it before I started looking at it. They were just stowing sails and heading south. Least I know what to look for now :).
Ah yes they have a single engine with hydrolic drives on the props. She is a commercial grade 4bt I think.
-sam
GREAT video guys. Really enioyed watching and loved the drone footage, that was awesome 👌
Thank you!! Was a super super fun day and had a blast flying the drone that day!
-Cait
Before you explained, my first thought was, “Well, might as well get some work done.” 😂
Glad you like the intro! Was super fun to beach her, long day but super rewarding and super fun! Charlie was so c9nfused when she wanted to go swimming and there was no water around the boat 😂
Cheers!
💜💜
-Cait
I have had those for 12 years. There is a complete lack of maintenance, they should be greased as recommended. Put hard anti fouling on them and keep them clean
Hey John you may be right as the last owners didn't go to far for a few years and were living in a marina. I still feel that the surface area of the blades is a bit small for a heavy cat so I'm going to try other ones and do a comparison analysis. I will also completely strip down the kiwi props and give them a good birthday.
-sam
Thanks for the Turkish subtitles
No worries! I believe youtube does the translation for the different languages 💜 thank you for watching really appreciate hearing that people are enjoying the videos 💜
great video guys,and we are looking forward to the next episode.
Cheers we appreciate the support 👍
-sam
Would love to chat with you about that plastic you have on your chain ! In stead or using plastic you can use the metal that chopping blocks are made of . It would ware out far less then plastic that the sun will deteriorate. Now another suggestion for bottom paint. Stop using Anti foul ! Look into Ringo liner . It will help with flotation as well as harden you bottom. Never worry about beaching . Cleaning would be a rag across the bottom and done. Maybe redo in 5 to 8 years .
Thank you! We have the antifoul paint onboard for when we are hailed out next, the great thing about bottom paint is that if you don't like what you have on, you can change it every 2 years 😉
Love learning new things, thank you
💙🤍💙
-Cait
❤❤❤
Cheers
New subscriber for you folks, I like your style, choice of finish her up aluminum Cat, and NO SAIL DRIVES !!!! sail drives should be illegal , lol
Best of luck on the prop re-do. Here making my own copper based antifoul... Oh, Max props. OR a Brunton autoprop. Max prop for the money and they do STOP your boat Fast in reverse. Variprop has a really beefy and quiet feathering prop, not sure where the price lies though.
Thank you!! Love hearing people are enjoying the videos.
Yes, we are not the biggest fans of sail drives. Shaft drives were on the "strongly want" list when we were looking at boats. This girl's design was for sail drives and the first owners did not want them so when they had her built they had the engines moved to under the aft beds, a skeg designed and shaft drives. The original area for the engines are now amazing storage lockers and tool workshop. The previous owners were awesome and gave us a bunch of photos are her build from skeleton to launch 🤗
💜
Well it does look like a back yard, LOL . Be safe
Thank you! We had a lot of fun this day!
I had an old 48ft Crowther and I changed to Seahawk's Autostream props. They were in Victoria but now in NSW. I also changed the starboard output to left hand as I was getting cavitation. The Autostream worked extremely well and one benefit I was most impressed with was that you had the same power in forward and reverse. Very helpful if you need to stop quickly. Also they were easy to install and maintain.
Hi Geoff, cheers for your comment. If you have time I would love to ask you a few questions.
What props did you have before the auto stream? Whas there a noticeable difference once changed. Motoring sailing and punching weather.
-sam
I had fixed props that were driven by 60hp via shaft drives. I did go a little bigger with the Autostream and I did get better forward motion without cavitation but can remember how much. The power in reverse was outstanding and so much more than with fixed props. I had the Autostreams for 10 years (sold the boat) without a single issue.
Wow that is the best reference ever! I have purchased flexofold props already, they were a bit cheaper, but if they don't work out I'll look at outs stream again. Cheers for the advice!
-sam
Fun video to watch. Would have loved to see the time lapse high tide and the boat floating again!
Thank you!!
A time lapse of the boat rising would be great, we will be beaching her again when we get new props and will try to film her floating again!
💙💙
@@sailingwiththejamess Not to mention, a cinematic cleaning video, ASMR scraping, with nice music would make for a very satisfying watch. Think power washing videos :) Best of luck! Subbed!
Hahaha funny you should mention that we used to own a power washing company lol
-sam
New to your show so forgive me not knowing how you really use your boat. You say she's heavy. I'm not sure drag on a standard prop would bother you much. Especially if you can find the perfect two blade fixed prop that should tuck in behind the keels.
Thank you!! Love hearing people are enjoying the videos! We greatly appreciate it!
Because of the skeg we will have to go 3 blade props, 2 blades will exit and enter the skeg at the same time causing vibration 🤗
We are supposed to be 15 tonne and we are 17. We are doing our best to get the weight off and we are seeing a difference in performance 🙌 but we are not finished yet getting the weight off, hoping to do our best with making her lighter 🤗 but looking at props that have some good push for heavier boats ❤️
Oh wow your cat looks cool like that, I don't know how our 47ft boat will go beached as it's not a catamaran...but we will see next year 😊
We have a friend that fitted acrow props to his monohul to black it and keep it upright. Depending on you underwater arrangements it could be an option for you. Good luck next year.
-sam
@@sailingwiththejamess oh that would be cool thank you 😊
Not a worry! We love that the sailing community is all about helping each other 💜💜
-Cait
@@sailingwiththejamess yes the best community 🥰 Jacinta
💜⛵️🥰🥰⛵️💜
-Cait
Here is a Tip use in your Antifouling the hottest Chili Powder you can find, ad that to the paint about 1 Part in 6 or 7 Parts of Paint, the Result will surprise you.
Thank you for the tip! Adding Chili powder has been recommended by a handful of people now, we will do some investigation on it as everyone who has recommended it has said amazing things! 👏🌶
🌶❤️
-Cait
Gori props. Folding, Over Drive, Better Speed in flat water and save fuel. Only negative is they are not that strong in reverse but once you know that, not a prob. Peter A - Smokyjim
Thank you Peter! Greatly appreciated!
Loving the videos! Any updates on how you‘re gonna tackle boat weightloss? As a non-boat owner that watches way to much sailing-tube i was wondering if fuel weight thats below the waterline counts towards the boat weight? Greetings from the Netherlands
Greetings! Fuel weight does count. Specific gravity of salt water is 1.025 and the average diesel Specific gravity is 0.86 so if we go in volume then we still gain some buoyancy when our tanks are pressed.
-sam
My cat is a lot smaller than yours. I am running Gori props on it now for thirty years and am more than happy with them.
Yes, Gori props look marvellous, but unfortunately, they are a little out of our budget. We went for flexofold as we felt that they were slightly better value for money.
-sam
nice
Cheers Tom
lol, what a dirty trick to pull on the kid.
Heaps of fun playing in the sand and making sand castles under the bridge deck that day! 🙌⛱️ Best shade we have ever had at the beach ⛱️ 😎 😍
-Cait
We used to beach our trymaran at Seabrook Island at our gramps and scrubbed the underside. And do small maintenance and away we went. Not sure why yours are so overgrown this bad after 6 weeks. That's allot we used
Spartan Multi-Season Antifouling Paint & Sharkskin Hard BP.
On the trymaran.
Antifoul at the end of its life.
Oh man trimaran are great (and fast!) 😍 we looked at a few when boat searching 💕
-Cait
Hi just watched your video and see you have vivid petit antifoul. We also have an aluminium cat and are about to use the same antifoul, our question is how long have you have this antifoul on for , we were hoping for around 12/ 18 months
It has I high amount of biocides in it which we found works well for about 14 months but then the antifowl is not very soft and we had trouble reaching the speeds required for the antifowl to start to self polish. That is why we are trying internationals version (which is softer) we will let you know which one we find is best.
-sam
Thankyou
Any time my friend
That anchor doesn't look set, looks like someone just dropped it and drifted back . . .
You are exactly right, We hadn't been there in a long time and didn't know how flat it was, but we put the anchor out just in case. Our plan was to move/set the anchor by hand to check position for best escape route but were lucky we didn't need it.
-sam
It is illegal to clean hull etc in QLD ..especially the pristine Whitsundays…
I looked into it and it would seem that if you pay an environmental levy then it is OK. I fail to see how paying money to the federal government makes a difference to the environment but whatever works I guess.
-Sam
The natives up the coast told me they mix cayenne pepper in there paint as it acts as a irritant to growth on there boats .
We've heard that trick, haven't tried it ourselves though but we have heard those that have swear by it 👍
-Cait
🇹🇷🇹🇷🇹🇷👍👍👍
💜💜💜⛵️⛵️⛵️💜💜💜
I think my company built that cat a lot of years ago same name same un painted hull can ya tell me who built it ..
Hello! That would be amazing if you did, she started build I believe Feb of 2004, Built in the Gold Coastby MEC. We have pictures of her skeleton from the first owners, we are the second owners of her 🤗
Beached as bro, how’s the plinkton… lol😅
Hahaha that's the one. I'm a kiwi so cait loves the saying lol
-sam
@@sailingwiththejamess dead giveaway that 😂
Hahaha yes that ans I'm meant to have a strange affiliation with seep or so I've been told
-sam
I heatgun will get those stripes off
Uh yes we should have got one. We ended up going to bunnings and getting a heap of scrapers.
-sam
Maybe a hair dryer could work. Hey I'm enjoying you explaining the repairs. Thanks@@sailingwiththejamess
Thank you! The paint scrapers from Bunnings worked like a dream at getting the stripes off 😍
-Cait
Do your gearboxes have the same clutches and rating forward and astern?
They have the same rating in foward and reverse but due to keeping everything as simple as possible we have decided to go with 2 right handed props.
-sam
@@sailingwiththejamess All good. I've some people who didn't realise there was a difference in rating and ratio.
Cheers for looking out for us. Much ly appreciated.
-sam
Is it a brumby 48?
Hey Mark,
Mumbys are great boats, none were for sale when we were looking at boats. We did toss around the idea of building a Mumby 48.
Our boat is a Lock Crowther Catamaran, Design 85 Mark IV
Absolutely in love with her!
-Cait
Started watching you guys..
At first was great! But now uveitis seen 3 episodes..and all 3 are totally devoted to either TALKING about fixing stuff..or fixing stuff..
Sure..give as an idea of what needs doing, but FFS..were here, well I am at least.. to see sailing ! Lol.
Hahaha fair enough we will try and get more sailing videos. We just seem to be spanding heaps of time fixing stuff at the moment lol.
-sam