I love my bridge cast! One suggestion/request is to let us download and upload other mic effects as many creators use or create alternate personas! I’d even be willing to purchase the files to use on the bridgecast
The confident pretty woman has a point. I don't know the product, but I'm inclined to believe it's good. Cursed be your unfair marketing strategies, she's just so confident and pretty that I want to believe her everything.
Love this device. Would like to see a V2 add a divot to route a headphone wire underneath, or possibly move it in between the line out and phones dials to plug it at a nice angle with the slant. The built-in DAC/Amp is pretty strong. Would love to see if it officially supports up to 250ohm, 300, 600, etc.
if I may give you a tip for the Roland Bridge Cast - Dual Bus Gaming mixer... First of all, it seems to be a great product, I actually do not doubt that in anyway, HOWEVER.. it would just be SO MUCH better if you had some more visual on the product, like some nice screens (or 1 big screen, like the rodecast) so you are not forced to look at the names for each dial, as you might not have your Microphone on "mic", I know.. you can change it and so, it doesn't matter what it says, but it's that sort of thing that makes people choose other products, because.. while I do not doubt that the Bridge Cast is an amazing product.. actually, I'd say it has 99% of what I've been looking for in a similar product, but I personally just want that more clean, user-friendly & visual aspect of being able to costumize it more, also since you actually allow for FX effects too.. like. I know the product is really new, but I hope you'll take this into consideration, maybe add some dedicated buttons for the FX/Midi etc. for a Bridge Cast 2 and if you do.. I'd honestly pick that over the rodecaster, go xlr, Stream Deck+, Beacn Mix Create and what else.. Because then you would more or less have the perfect products for gamers, streamers & content-creators in general. I know this mostly sounds like cristism, but I'm not going to say what I like about it, because there definitely is a lot I like about it, too many things to mention, so.. keep up the good work :)
agreed. My biggest issue with the device is that I don't want to adjust my mic that often, but I can't mute it if I set that mixer to chat or anything else. Seems like such a simple thing to add to the menu yet so frustrating. I only get to use 3 mixers lol
how were the gaming EQ preset settings derived and for which headphone have they been made for? The headphone you wear will have an equally large effect on the sound as these EQ settings Without knowing the headphone that the sound is going to be reproduced over, there's no way of knowing whether a certain frequency range is overrepresented or underrepresented. The EQ settings shown on the bridge cast seem to imply that e.g. for Apex you need 3 dB more energy at 1.2 kHz, but the fact is that individual headphones differ by much more than 3 dB among each other, so you can not possibly make a statement like "every headphone needs 3 dB more". For some headphones you'll need 3 dB, for others you'll need 1 or 6 dB. For others you may even need -5 dB.
@Derek xPaPaDx Frampton Professional audio out is always Balanced TRS, that is 2 1/4" TRS or 2 XLR. Trying to convert a stereo 3 wire to 2 separate mono outputs that are TRS is not possible unless you split the output and use a direct box for each channel. TRS is for audio noise cancellation and is not stereo as the other pin is sent with same signal out of phase. , even though a 1/8" 3 pole is wired like a single TRS, it is for stereo only. Plug that into an input expecting a TRS (mono, 3 pole) will produce real garbage. Roland is guilty of supplying unbalanced audio out on a lot it's gear.
Im using the line out to a my studio monitors using an adapter cable for 3.5 to two 6.35 trs connectors and I’m getting lots of random hum. It’s only when I’m playing a game tho, it’s almost like it’s picking up my gpu coil wine?? But on my headphone out it’s ok.
Is it possible to multitrack recording channels separately into my daw? I mean recording at the same time one track for the mic and one stereo track for my external instrument (keyboard) connected via aux input
Can I use this to send the stream sounds such as cheers and my stream deck sound clips to my console game chat? So whilst I'm streaming using a console to pc set up send the audio back to the console from the pc ? Making it a 1 mic and 1 headphone setup?
Will DSP settings be saved in hardware so that you can set it on one device using the Roland software, then have it applied on a different device without the Roland software? Also, how many bands is the EQ under the Mic Cleanup setting?
I wounder what is the dac in this, no info? for me its little low on output, and that with a headfhone at 35ohm, its high sound, but not to good, so noe im out off getting a amplifier to connect to headfhone out, and in to amplifier.
I'm not a Streamer but i'm looking for something that Can mix thé différents Windows audio source I.e. Discord, Game, Twitch , Spotify. Will this do the job ?
Does it have sub mixes and vst support? Having sliders for EQ control isn't useful to anyone when instead of granular frequency control. 3.5mm jack for headphones, is this 2010 calling.
Recently marketing interesting choices (on priced interface with DSP) - Lewitt Connect6 300 bucks - low dynamic range line output - 37 Ohm headphone output impedance, ok it doesn't drive well low impedance headphones, than it's good for high impedance yee? No, only 11 mw at 300 Ohm - Yamaha YG01 300 bucks - only-minijack line output - Apogee boom 300 bucks - you have to unplug the headphones to activate the speakers, the Headphone output it's smart placed on the back of the board... added with a noisy preamp. - Roland 300 bucks - Clearly gamer oriented and yes you can eq a game, but you do not have surround support. Again only minijack line output, because the smartest gamer spent 300 for an interface, 100/300 for a mic, 20 for speakers... and don't want headphone surround.
im guessing this wont work for us who have high end USB DACs also no trace of optical or even RCA... such a shame coz even tho this would be lovely to have i think my DAC has a hell of a lot better sound quality then this
I am thinking buying it, I have IEMs, but they have hissing / static background noise with Rode AI-1/Focusrite Scarlett due low impedance (FiiO FH3 with 24 Ohm). I am not sure if I would would have same issue with this device. Only other option is to use DAC's RCA out and use AUX as input. Sadly you lose most of features such as separate channel for game, voice chat and music (if you want to hear it during downtime and not when you play game), all three need to go through DAC. But on other hand you gain 2 extra channels for other use (alters, donations, whatever you can figure out). On second though, getting DAC with RCA input might work for me, but that counts being able to chose which mix goes to speaker output and it also being good quality for not wasting DAC's amp's capability.
I'am glad to see more manufacturers trying to capture the gaming/streaming space. But why are you purposely gimping your interface when it comes to I/O? Assuming the mic preamp and converters are decent it would be a no brainer if that thing had 2 pairs of TRS outputs (like almost any similar or lower priced interface at that size). But yeah sure lets use ONE aux out for speakers. Its not like an audio interface that is marketed directly to gamers/streamers would be connected to something that might cause interferences (like a gaming PC that draws 700 watts from the same power strip). And its not limited to Roland. All of them do some stupid sh*t like this. Roland BRIDGE CAST: + looks like solid build quality + useful control layout - pitiful connectivity Lewitt Connect 6: + above average connectivity (second usb input and they the gave us at least one pair of TRS out) + by far the best software among comparable devices as far as i can tell - very limited in terms of physical controls - glossy plastic build YUCK Yamaha ZG01: + interesting approach to connectivity (two HDMI inputs in addition to usb and aux, sadly no balanced output once again) + physical controls are good though some choices are questionable - solid but still plastic build (hey at least its not glossy) Why is it so hard to design a somewhat competent audio interface for gaming/streaming? The same manufacturers have no problem including these features in interfaces for music production which are cheaper. It's like they make the interns design these.
Бро хай! Расскажи как твой пресонус? Вроде по спекам - огонь! Но на форуме разрабов активности - 0, а из комментариев - профили слетают после перезагрузки, фоновый шум без микрофона, прога не видит устройство ... Как у тебя? Нашёл за разумные деньги но боязно, т.к. вернуть не получится ...
@@ВасилийЯковенко-ъ1ъ Шумы были в первых версиях, в новых говорят, что всё ок. Шумы не слышно в наушниках DT 770 250 Om (даже на старых версиях). Даже если они есть, то шумы не лезут в запись и не слышны на трансляции, только тебе в наушниках при тишине. Чем меньше ОМ в наушниках, тем они громче. Карта всегда сохраняла и загружала профили, видела микрофоны. Иногда карта вила. Плохо , что в ней не было отдельной кнопки "выкл". А так всё с ней нормально было, я её уже продал. За адекватные деньги это самый толковый выбор опций и то, что у неё свой DSP проц. Если мало шаришь или первая карта, то я бы что-то по проще выбирал. Сам сейчас юзаю beringer ultravoice UV1. Он проще, понятней, мне нравится. Ревелатор тоже хорош, я просто наигрался с ним)
Please I will like to have your catalogue, and how can I buy this material from your company am a dj so please kindly send me your catalogue thanks in advance bye for now
Why does every good mic product use big ass mic inputs why not have the never style that you can use 3.5 mm jacks ect with then it’s universal id have to buy a new mic as I have a hyperx quad cast and I love it shame as I would of bought this but I’m not replacing a good mic too for no reason
All they had to do was use Pro audio in/out connectors. Very simple but Roland is doing this more and more to a lot of its products. They force pro installations to split the stereo and run 2 direct boxes for balanced L/R on Pro amps. That is around $200 to do it right and the customer eats it.
Roland sucks!!! Bring back the analog products that actually made you a successful company. 303, 606, 707, 909, Junos, JX, Jupiter, SH. No more crap!!!
![⭐🎚️ Bridge Cast BETTER Than GoXLR?! [Review + Tips]](http://i.ytimg.com/vi/cWnAaRneq60/mqdefault.jpg)
I love my bridge cast! One suggestion/request is to let us download and upload other mic effects as many creators use or create alternate personas! I’d even be willing to purchase the files to use on the bridgecast
wow it's so perfect it switched the audio of the voice actor without us even noticing!
Wow, "now we are talking"! Great product.
The confident pretty woman has a point. I don't know the product, but I'm inclined to believe it's good. Cursed be your unfair marketing strategies, she's just so confident and pretty that I want to believe her everything.
excellent presenter
she is not for sale
@@kalubandali2241 😂😂
😉
she's so pretty and confident, she could sell me a bread slicer
wooo 👍🏻 , btw kita loh yg buat
line bridge cast
team : - ira
- intan
-okta
- tasya
- lia
This is great!.. 👍
Love this device. Would like to see a V2 add a divot to route a headphone wire underneath, or possibly move it in between the line out and phones dials to plug it at a nice angle with the slant. The built-in DAC/Amp is pretty strong. Would love to see if it officially supports up to 250ohm, 300, 600, etc.
I'm using a sennheiser hmd 26-ii 600 ohm on this. Headphone boost 1 option pretty much solves all volume issues. It is a little quiet without.
Pretty good, wish it would come in white though, with silver dials.
if I may give you a tip for the Roland Bridge Cast - Dual Bus Gaming mixer...
First of all, it seems to be a great product, I actually do not doubt that in anyway, HOWEVER.. it would just be SO MUCH better if you had some more visual on the product, like some nice screens (or 1 big screen, like the rodecast) so you are not forced to look at the names for each dial, as you might not have your Microphone on "mic", I know.. you can change it and so, it doesn't matter what it says, but it's that sort of thing that makes people choose other products, because.. while I do not doubt that the Bridge Cast is an amazing product.. actually, I'd say it has 99% of what I've been looking for in a similar product, but I personally just want that more clean, user-friendly & visual aspect of being able to costumize it more, also since you actually allow for FX effects too.. like.
I know the product is really new, but I hope you'll take this into consideration, maybe add some dedicated buttons for the FX/Midi etc. for a Bridge Cast 2 and if you do.. I'd honestly pick that over the rodecaster, go xlr, Stream Deck+, Beacn Mix Create and what else..
Because then you would more or less have the perfect products for gamers, streamers & content-creators in general.
I know this mostly sounds like cristism, but I'm not going to say what I like about it, because there definitely is a lot I like about it, too many things to mention, so.. keep up the good work :)
agreed. My biggest issue with the device is that I don't want to adjust my mic that often, but I can't mute it if I set that mixer to chat or anything else. Seems like such a simple thing to add to the menu yet so frustrating. I only get to use 3 mixers lol
@@Nathanias что ты имеешь в виду? Настройки не сохраняются после перезагрузки ПК???
how were the gaming EQ preset settings derived and for which headphone have they been made for? The headphone you wear will have an equally large effect on the sound as these EQ settings
Without knowing the headphone that the sound is going to be reproduced over, there's no way of knowing whether a certain frequency range is overrepresented or underrepresented.
The EQ settings shown on the bridge cast seem to imply that e.g. for Apex you need 3 dB more energy at 1.2 kHz, but the fact is that individual headphones differ by much more than 3 dB among each other, so you can not possibly make a statement like "every headphone needs 3 dB more".
For some headphones you'll need 3 dB, for others you'll need 1 or 6 dB.
For others you may even need -5 dB.
Looks sweet.
Shame that this doesn't have TRS outputs for speakers. Would buy instantly if that was the case.
@Derek xPaPaDx Frampton Yep 1/4" for studio monitors. Can you give me a link for these adapters? Do they change sound in any way?
@@DerekxPaPaDxFrampton Thanks for the info. I think I'll get myself a set of those Roland cables. Nice!
i know, roland drop the ball.
@Derek xPaPaDx Frampton Professional audio out is always Balanced TRS, that is 2 1/4" TRS or 2 XLR. Trying to convert a stereo 3 wire to 2 separate mono outputs that are TRS is not possible unless you split the output and use a direct box for each channel. TRS is for audio noise cancellation and is not stereo as the other pin is sent with same signal out of phase. , even though a 1/8" 3 pole is wired like a single TRS, it is for stereo only. Plug that into an input expecting a TRS (mono, 3 pole) will produce real garbage. Roland is guilty of supplying unbalanced audio out on a lot it's gear.
Im using the line out to a my studio monitors using an adapter cable for 3.5 to two 6.35 trs connectors and I’m getting lots of random hum. It’s only when I’m playing a game tho, it’s almost like it’s picking up my gpu coil wine?? But on my headphone out it’s ok.
But does it have anything like clip guard that Elgato offers?
Gabriella's hot, so I went ahead and ordered a Bridge Cast
Would it work in a pc ps5 pro streamer system?
the only option for console is control chat/game audio, right?
So is it possible stream music to PS5 via aux (smartphone)?
Is it possible to multitrack recording channels separately into my daw? I mean recording at the same time one track for the mic and one stereo track for my external instrument (keyboard) connected via aux input
What's the name of that horizontal light under the display?
It’s a Phillips one I think
Sandstorm
Please add the hdmi pass through to this model.
Can I use this to send the stream sounds such as cheers and my stream deck sound clips to my console game chat? So whilst I'm streaming using a console to pc set up send the audio back to the console from the pc ? Making it a 1 mic and 1 headphone setup?
Will DSP settings be saved in hardware so that you can set it on one device using the Roland software, then have it applied on a different device without the Roland software? Also, how many bands is the EQ under the Mic Cleanup setting?
I need the megaphone effect on the bridge cast
I wounder what is the dac in this, no info? for me its little low on output, and that with a headfhone at 35ohm, its high sound, but not to good, so noe im out off getting a amplifier to connect to headfhone out, and in to amplifier.
I'm not a Streamer but i'm looking for something that Can mix thé différents Windows audio source I.e. Discord, Game, Twitch , Spotify. Will this do the job ?
Does it have sub mixes and vst support? Having sliders for EQ control isn't useful to anyone when instead of granular frequency control. 3.5mm jack for headphones, is this 2010 calling.
I can accept the mini jack for the headphones ( many studio headpones can use it )
But unbalanced line output minijack for 300 bucks? No.
I agree thats kind of dumb, but i beleive this is built for the average streamer who doesnt know anything about audio @mentalrey1
Can i put a output on my microphone. I mean can i put my music on the ears of my friend ?
Can I utilize Dolby Atmos with this?
the high and low voice demonstrated sound terrible. can that be adjusted?
Can you tell us her EQ settings?
Can you make it in white ?
How to buy that on Brazil ?
Pro audio with main line out via 3.5 jack, huh?
Recently marketing interesting choices (on priced interface with DSP)
- Lewitt Connect6 300 bucks - low dynamic range line output - 37 Ohm headphone output impedance, ok it doesn't drive well low impedance headphones, than it's good for high impedance yee? No, only 11 mw at 300 Ohm
- Yamaha YG01 300 bucks - only-minijack line output
- Apogee boom 300 bucks - you have to unplug the headphones to activate the speakers, the Headphone output it's smart placed on the back of the board... added with a noisy preamp.
- Roland 300 bucks - Clearly gamer oriented and yes you can eq a game, but you do not have surround support. Again only minijack line output,
because the smartest gamer spent 300 for an interface, 100/300 for a mic, 20 for speakers...
and don't want headphone surround.
Why can’t you put a guitar input on there.
Can I run this with the ps5
yes, they even have it on the box diagram showing a PS5 diagram.
it wont even let me DL the software
Yeah so she was beautiful
im guessing this wont work for us who have high end USB DACs also no trace of optical or even RCA... such a shame coz even tho this would be lovely to have i think my DAC has a hell of a lot better sound quality then this
I am thinking buying it, I have IEMs, but they have hissing / static background noise with Rode AI-1/Focusrite Scarlett due low impedance (FiiO FH3 with 24 Ohm). I am not sure if I would would have same issue with this device. Only other option is to use DAC's RCA out and use AUX as input. Sadly you lose most of features such as separate channel for game, voice chat and music (if you want to hear it during downtime and not when you play game), all three need to go through DAC. But on other hand you gain 2 extra channels for other use (alters, donations, whatever you can figure out).
On second though, getting DAC with RCA input might work for me, but that counts being able to chose which mix goes to speaker output and it also being good quality for not wasting DAC's amp's capability.
Is it a USB CODEC Mixer? ( I am a PS4pro / PS5 Codec Mixer Freak!!!! ) Well?....is it? #PEACE
Does the ps5 recognize the Roland Bridge Cast as a codec audio soundcard device?
@@hiphophobbyklub it should. It has the PS5 in the diagram right on the box
What the price
€299 is what Thomann shows (for my region), though they don't have it.
I'am glad to see more manufacturers trying to capture the gaming/streaming space. But why are you purposely gimping your interface when it comes to I/O? Assuming the mic preamp and converters are decent it would be a no brainer if that thing had 2 pairs of TRS outputs (like almost any similar or lower priced interface at that size). But yeah sure lets use ONE aux out for speakers. Its not like an audio interface that is marketed directly to gamers/streamers would be connected to something that might cause interferences (like a gaming PC that draws 700 watts from the same power strip). And its not limited to Roland. All of them do some stupid sh*t like this.
Roland BRIDGE CAST:
+ looks like solid build quality
+ useful control layout
- pitiful connectivity
Lewitt Connect 6:
+ above average connectivity (second usb input and they the gave us at least one pair of TRS out)
+ by far the best software among comparable devices as far as i can tell
- very limited in terms of physical controls
- glossy plastic build YUCK
Yamaha ZG01:
+ interesting approach to connectivity (two HDMI inputs in addition to usb and aux, sadly no balanced output once again)
+ physical controls are good though some choices are questionable
- solid but still plastic build (hey at least its not glossy)
Why is it so hard to design a somewhat competent audio interface for gaming/streaming? The same manufacturers have no problem including these features in interfaces for music production which are cheaper. It's like they make the interns design these.
Пользуюсь Renelator io24 и его возможности мне показались более профессиональными. Чтож, жду более детальных обзоров.
Бро хай! Расскажи как твой пресонус? Вроде по спекам - огонь! Но на форуме разрабов активности - 0, а из комментариев - профили слетают после перезагрузки, фоновый шум без микрофона, прога не видит устройство ... Как у тебя? Нашёл за разумные деньги но боязно, т.к. вернуть не получится ...
@@ВасилийЯковенко-ъ1ъ Шумы были в первых версиях, в новых говорят, что всё ок. Шумы не слышно в наушниках DT 770 250 Om (даже на старых версиях). Даже если они есть, то шумы не лезут в запись и не слышны на трансляции, только тебе в наушниках при тишине. Чем меньше ОМ в наушниках, тем они громче.
Карта всегда сохраняла и загружала профили, видела микрофоны. Иногда карта вила. Плохо , что в ней не было отдельной кнопки "выкл".
А так всё с ней нормально было, я её уже продал. За адекватные деньги это самый толковый выбор опций и то, что у неё свой DSP проц.
Если мало шаришь или первая карта, то я бы что-то по проще выбирал.
Сам сейчас юзаю beringer ultravoice UV1. Он проще, понятней, мне нравится. Ревелатор тоже хорош, я просто наигрался с ним)
almost as pretty as the presenter 😊. it is pretty dope but i’ll just use my Juno
Please I will like to have your catalogue, and how can I buy this material from your company am a dj so please kindly send me your catalogue thanks in advance bye for now
They have not thought that most microphones, headphones etc. we use have usb connection, discard what we have now to change ha jack, NO NO
shame it cant take that low end out of her voice
what? they could've boosted the EQ for the demo, or someone else added it in separately during video production post-processing.
Lies you can use any mic no you can’t if it’s lot a mic that uses xlr what about 3.5mm or usb c
You can use the TRRS Mic input... No decent mic is using USB.
分かり難い動画！
しっかりと日本語で説明をして欲しい！
Why does every good mic product use big ass mic inputs why not have the never style that you can use 3.5 mm jacks ect with then it’s universal id have to buy a new mic as I have a hyperx quad cast and I love it shame as I would of bought this but I’m not replacing a good mic too for no reason
It will be for sale for about 3 months, not really be worth the $300, and will stop being supported after 6 months. Welcome to Roland.
I thought they were meant to be good with updating for bugs etc? The Roland TR8s was produced in 2018, latest firmware with upgrades Aug 2022
All they had to do was use Pro audio in/out connectors. Very simple but Roland is doing this more and more to a lot of its products. They force pro installations to split the stereo and run 2 direct boxes for balanced L/R on Pro amps. That is around $200 to do it right and the customer eats it.
Roland sucks!!!
Bring back the analog products that actually made you a successful company. 303, 606, 707, 909, Junos, JX, Jupiter, SH. No more crap!!!
just pay the damn price for one lol. they wont
Just pay for the originals if you want them. They still exisit. You can own all of them.
You couldn't afford it.
Why ask for stuff that already exists and that you can already buy..? 😅
Appreciate the 75db of gain but stop forcing people to use stream mix or add side-chaining.
Seems like a very easy to use and handy device to start streaming, and make it work quick and not to much hassle nice review 😁🤓🧐👽🔌👀❤💯🛫🛬🌕🌞👍