Good sequence experiment, thank for Profesional tutor, and complete equipment of divice👍👍👍👍, always give us basic quide step by step,because I like science end technologi, and give link buy for only original device
with Lora you really need to chose your battle. You only have a certain amount of bits in the payload, you need to pack the right information for all the servos in one payload. The other issue is that you need to make sure you have robust error detection, so a command is ignored if it gets a corrupted package. Third issue, is the rate at which you are sending the data. Best case scenario is two packages every second. So only way to have that in action is to pair it to a flight computer and drive in stabilization mode (which is also a good idea since if you want lora is because you want to pilot the aircraft from far). cool thing lora is bidirectional so in principle cool telemetry but this would completely decrease the communication speed
It is a great conceitual project, a long range transmitter, but the command delay (time between input on joystick and response of servos) is about 5 sec?? This will not work for an rc model...
It looks like there is a significant delay from the time the joystick is moved and when the Servo responds making this unsuitable for an RC Airplane. Clearly the plane at that beginning the video is not actually flying with this LoRa setup. Have you been able to debug this? Or is this a limitation of LoRa ?
By reviewing his sketch/code. I saw that he used multiple delay commands. So, maybe the lag is because of his sketch/code being so inefficient........maybe.
I'm still trying to understand if the LoRa can handle all the data transmissions of the controller commands. I've tried to understand LoRa and it seems they are limited with respect to the amount of data that can be sent and received at a given time; is this why we are seeing the lag in the servo motors? Is this why we have not seen the flight in action yet?
Well, in short, possibly But, i would rather buy a range extender module for my FlySky Th9X (Dx9) rather than hook it's entrails up with something sketchy as a self made, laggy, diy range extender I guess kendinyap had showed a diagram for an Arduino based Tx-Rx range extender....he used it as well if i guess...so, might as well go with that... Plus, FliteTest mentioned something about a "clip-on" range extender in one of their Vlogs...
By reviewing his sketch/code. I saw that he used multiple delay commands. So, maybe the lag is because of his sketch/code being so inefficient........maybe.
I am looking to transmit and receive the data from 2 channels using a ppm signal. My tx has a ppm signal coming out, this to an arduino which will deliver the transmission to the reyak or a different LoRa tx. Then to the LoRa set up as an rx, to an arduino as my ppm to sbus signal converter on the receiver, or just an ppm-pwm/sbus ... If this will work, how gross will the delay be and what are your thoughts? kind regards
Hi ,......Range is fine but how much is the data rate , if its low less 250 kbps ..how this is viable to make a quad copter drone txr , rxr ..can be used for telemetry but for Txr ? ..can u plz tell .
Hlo friend ur video is great but I am having a doubt is it feasible to connect the Rx output from the receiver to an flight controller?like matek or omnibus flight controller?
Sir there any method to interface lora module to esp32 cam or to any device with any lora module I am searching to much... because lora can provide 10km + range which is extremely horrible for me can you please tell or give sum hint where I can get all this information
FC won't detect this lora module. U has to program the flight controlled (FC) on Ur own in order to use it(it's very very hard).so,it's not recommended it can be only used for aurdino based FC.
@@ElectroniClinic thanks alot...but there is a problem that there is no option to buy this module in india.....also not available on Amazon and flipkart.....any other module available????
@@ElectroniClinic How can I use sx1278 instead of rylr896 module . Can you tell how can I replace this code with sx1278 module? Can you help? I have also visited your website but nothing helpful..??
Such a great video. No one used lora. You did a mystery.
Yes you are right I was also searching for someone who can do the task for me
Good sequence experiment, thank for Profesional tutor, and complete equipment of divice👍👍👍👍, always give us basic quide step by step,because I like science end technologi, and give link buy for only original device
with Lora you really need to chose your battle. You only have a certain amount of bits in the payload, you need to pack the right information for all the servos in one payload. The other issue is that you need to make sure you have robust error detection, so a command is ignored if it gets a corrupted package. Third issue, is the rate at which you are sending the data. Best case scenario is two packages every second. So only way to have that in action is to pair it to a flight computer and drive in stabilization mode (which is also a good idea since if you want lora is because you want to pilot the aircraft from far). cool thing lora is bidirectional so in principle cool telemetry but this would completely decrease the communication speed
Excellent
One of the best videos
damn this is cool
Sir it's really work long distance
Awesome content bro...
Thank you so much 😀
u r master
It is a great conceitual project, a long range transmitter, but the command delay (time between input on joystick and response of servos) is about 5 sec?? This will not work for an rc model...
15 km? what result actual test range?
Hi , I wanna ask you how were you able to fly the drone using LoRa?
Great project ... Can you do a drone project with this same Rylr896 Lora
I mean how can I fix a camera like drone in this please tell
pleas upload pcb layout making video
What depends on whether the range can reach 5 or 15 km?
I was waiting for this 😍💕
It looks like there is a significant delay from the time the joystick is moved and when the Servo responds making this unsuitable for an RC Airplane. Clearly the plane at that beginning the video is not actually flying with this LoRa setup. Have you been able to debug this? Or is this a limitation of LoRa ?
By reviewing his sketch/code.
I saw that he used multiple delay commands.
So, maybe the lag is because of his sketch/code being so inefficient........maybe.
Wow 😍
I'm still trying to understand if the LoRa can handle all the data transmissions of the controller commands. I've tried to understand LoRa and it seems they are limited with respect to the amount of data that can be sent and received at a given time; is this why we are seeing the lag in the servo motors? Is this why we have not seen the flight in action yet?
Well, in short, possibly
But, i would rather buy a range extender module for my FlySky Th9X (Dx9) rather than hook it's entrails up with something sketchy as a self made, laggy, diy range extender
I guess kendinyap had showed a diagram for an Arduino based Tx-Rx range extender....he used it as well if i guess...so, might as well go with that...
Plus, FliteTest mentioned something about a "clip-on" range extender in one of their Vlogs...
By reviewing his sketch/code.
I saw that he used multiple delay commands.
So, maybe the lag is because of his sketch/code being so inefficient........maybe.
Awesome ! I also want to make long range rc plane.
This is nice but you have to make this video in easy way for new users
amazing
can u please make another one with lora sx1278
Great Bro Keep it
thanks dear
hello
How many channels will this remote have?
Great! But I can See that there is a delay in transfer of data can I solve that somehow
DONT YOU NEED AN IMU MODEL FOR STABILIZATION? LIKE MPU6050?
Excelente proyecto. Me gustaría aprender a armar un proyecto con estos componentes. ¿Los envían a Valparaiso Chile?
Can you use e220- series?
I am looking to transmit and receive the data from 2 channels using a ppm signal. My tx has a ppm signal coming out, this to an arduino which will deliver the transmission to the reyak or a different LoRa tx. Then to the LoRa set up as an rx, to an arduino as my ppm to sbus signal converter on the receiver, or just an ppm-pwm/sbus ... If this will work, how gross will the delay be and what are your thoughts? kind regards
Hi ,......Range is fine but how much is the data rate , if its low less 250 kbps ..how this is viable to make a quad copter drone txr , rxr ..can be used for telemetry but for Txr ? ..can u plz tell .
please make a video on how to make a 24 km Transmitter and Receiver Controller
The delay of AT commands is very long. How do you use it to control motors?
No way. I think LoRa is not suitable for this. The maximum speed of 300 kb / s is 37.5 Mb / s. So think for yourself.
Hlo friend ur video is great but I am having a doubt is it feasible to connect the Rx output from the receiver to an flight controller?like matek or omnibus flight controller?
Nope
Sir there any method to interface lora module to esp32 cam or to any device with any lora module I am searching to much... because lora can provide 10km + range which is extremely horrible for me can you please tell or give sum hint where I can get all this information
Can I make 10 channel RC transmitter and receiver using lora
yes, you can. But wait for my next video, i am working on it. this time, I am using another type of Lora which is very fast.
@@ElectroniClinic thank you I am waiting
what are you say,, every think goes on up side my head .. i want to learn that think but why i didnt understand ?????
Can we make a drone with camera using this way
FC won't detect this lora module. U has to program the flight controlled (FC) on Ur own in order to use it(it's very very hard).so,it's not recommended it can be only used for aurdino based FC.
Hey bro i need ur help i am designing a model rocket can i use into ....rocket..to receive data like...temp, altitude,velocity, gravity...
Please reply bro.... love from India
yes bro of course you can. Watch my other videos on the Lora module. I have explained in detail how to receive data from multiple sensors.
@@ElectroniClinic thanks alot...but there is a problem that there is no option to buy this module in india.....also not available on Amazon and flipkart.....any other module available????
Sir.., can I use lora Ra-20 for your shceme & code program..?
Vaiya, atar diagram ta bujtesina, kivabe kivabe connection krbo
How many channels in this transmitter and receiver
can we use it for any airplane
Very Long delay better is use Lora p2p uart modules
Will u plz share Gerber files of TX and Rx
Hello sir.
Can i use this lora for rc fishing boat?
The range will be less on the water?
you can use
@@ElectroniClinic thank you very much for you reply
Why can I not enter your electronicclinic page on blogger. No projects will allow me to go to your page.
the website is live. what error you get?
oh sorry. i checked it. the wbsite is shitting to another high speed hosting. sorry once again.
Can you make 150 km range transmitter and receiver.
once i make the glider then i will think of such a long range
@@ElectroniClinic ok thanks bro.
Can use Lora RF-02 module with Arduino microcontroller??
yes
@@ElectroniClinic I upload sketch but not work.
Reciver side only 'AT' command print
@@viraltrend9911 you directly connected the rf module?
codes are different. watch my videos on lora SX1278
@@ElectroniClinic How can I use sx1278 instead of rylr896 module .
Can you tell how can I replace this code with sx1278 module?
Can you help?
I have also visited your website but nothing helpful..??
This is sketch which I upload..
Reciver code sx1278
#include
#include
#include
Servo myservo1;
int motor = 3;
String ServoLR = "";
String Speed = ""; // string to hold input
int val = 0;
int val2 = 0;
void setup() {
Serial.begin(9600);
myservo1.attach(5);
pinMode (motor, OUTPUT);
while (!Serial);
Serial.println("LoRa Receiver");
if (!LoRa.begin(433E6)) { // or 915E6
Serial.println("Starting LoRa failed!");
while (1);
}
}
void loop(){
{
// try to parse packet
int packetSize = LoRa.parsePacket();
if (packetSize) {
// read packet
while (LoRa.available())
{
int inChar = LoRa.read();
ServoLR += (char)inChar;
val = ServoLR.toInt();
}
ServoLR = "";
LoRa.packetRssi();
}
Serial.println(val);
if (( val > 490) && (val < 950))
{
myservo1.write(90);
delay(100);
}
if (val > 1000 )
{
myservo1.write(180);
delay(100);
}
if (val < 500)
{
myservo1.write(0);
delay(100);
}
}
///LED brightness
int packetSize = LoRa.parsePacket();
if (packetSize) {
while (LoRa.available())
{
int inChar = LoRa.read();
Speed += (char)inChar;
val2 = Speed.toInt();
}
Speed = "";
LoRa.packetRssi();
}
Serial.println(val2);
val2 = map(val2, 100, 1023, 0, 255);
if( val2> 255)
{
val2= 255;
}
{
analogWrite(motor,val2);
delay (50);
}
}
Transmitter code sx1278
#include
#include
int pot = A3;
int val;
int pot2 = A2;
int val2 = 0;
void setup() {
Serial.begin(9600);
pinMode(pot,INPUT);
pinMode(pot2,INPUT);
while (!Serial);
Serial.println("LoRa Sender");
if (!LoRa.begin(433E6)) { // or 915E6, the MHz speed of yout module
Serial.println("Starting LoRa failed!");
while (1);
}
}
void loop() {
{
val = analogRead(pot);
LoRa.beginPacket();
LoRa.print(val);
LoRa.endPacket();
delay(50);
}
/// speed control
{
val2= analogRead(pot2); // Potentiometer or Variable resistor is connected with Analog pin A1
val2 = map(val2, 0, 1023,100,1023);
LoRa.beginPacket();
LoRa.print(val2);
LoRa.endPacket();
delay(10);
if (val2 < 100)
{
val2 = 100;
}
if (val2 > 1023)
{
val2 = 1023;
}
}
}
Long range but data transmitting is too slow. it still cannot be used ft plane or drone.
Only theory?
Diy rc car pcb rance 1km
Do you have instegram
Bhainap Pakistani ho, apse kuch info chahiay
yes
Toooo slow
Please give this program file
its available on the website. check link in the description.
@@ElectroniClinic I checked your website can't find it please help me
wait let me check
i check it. the transmitter and receiver codes are available on the website. please check link in the description.
The latency on this makes it unusuable. The only reason id use this method is to create a robot which can wipe my grandmas ass from long distances
Excellent