Windshield Seal Replacement In The Beetle, And Motor Install!
Вставка
- Опубліковано 20 січ 2024
- Support the channel and the builds!
/ johnludwick
Order LG gear!
ludwicksgarage.com
SEND THE SHOP SUB MAIL!
John Ludwick Jr
PO Box 15185
Red Bank, TN 37415 - Авто та транспорт
As a glass installer back in the day (90's) I grew up on string-in jobs, and still get the call for friends when they have glass needing swapping over. I'd have that in on my own in about 3 minutes 😁 Top tips for future jobs. As with take 3 start at the side, with a loop on the other side. When pulling in the string, pull it against the glass, the reason you were snapping the string is because it was rubbing over the sharp metal edge of the aperture. Pull in each side to get the glass central, then pull in the bottom and top edges.
That’s great advice man! Thank you!
I feel like you need that windshield trim. One, for continuity since the rest of the windows have it and two, without it, it gives 65+, big window car vibes. Props either way for getting it done 👍
never understood the cali seals, looks too modern for the car and like u said doesn't match others
You have a superhero there in Cory!
Dishsoap solution in the groove with the rope fellas.
Totally would have helped!
Yes, sir.
Hard at work on this thing. Great work. 👍
Those windshields in theory seem easy until its time to do it! Glad you guys got it!
Dish soap and don't be afraid to beat the crap out of that window. Get the bottom in first. Then with slight force and your palm hit the window downward. I use paracord when I do mine. Works every time. Good luck.
When roping in screens in the cold, you should soak the seal in hot water for half an hour before fitting and while fitting always pull the rope towards the centre of the glass NOT directly out
Yea that definitely would have helped!
Throttle cables are always like that for a while I had to take some decently heavy duty rope and tie it around the top of the gas pedal so I could pull it back when I took my foot off the pedal that was fun
Cory is the goat with them welding skills
Might need some sort of heat for the shop! Sometimes things just fight but you both kept at it and got the job done! So stoked!
Yea man seriously! Was hoping the cold spell would only last a couple days! Haha.
@@JohnLudwick don’t worry it will be 7-10 years before it’s this cold again lol
Great job guy. Good luck in FL
Great episode! Will be really eyeing the next one, just purchased a narrowed beam for my black ‘55 so will be studying it real well!
Nice job on the re-seal of the windshield. The only thing i would have done differently would be to wire brush the rust off the seal area before applying rust-oleum paint.
We actually did! I just didn’t film it 😂
good! I had to learn the hard way many years ago on 1974 beetle. I did not wire brush off the old rust when i replaced the windshield only to have it come back after i painted the car..@@JohnLudwick
You guys have more patience than I do haha. I would have used poly on that windshield after attempt 1 😂
Dude I was ready to just wear goggles everywhere and not run one at all 😂
I love this car! The videos are just so much more engaging with Corey back. You seem to have much more fun with him there. Keep up the good work fellas
I use soapy water and string trimmer line to rope glass in, works really well and the line will never break no matter how hard you pull! Also- Why no chrome?!?! You could have reused that original J profile chrome!
I felt the pain on that windshield install! My wife and I have never done that kind of work, and we struggled with resealing all the glass on my bug. It's not fun! We used 8 gauge wire.
Yea man definitely not fun!
I thought poor Corey was gonna curse dealing with that rope and windshield but y’all pushed through…nice work fellas…
Good thing you don’t have rubber mats . One way to keep feet warmer
Love watching your channel man!! Growing up I always wanted a beetle just like this.. Can I enter the draw to win this thing if I'm all the way in SA?? 🇿🇦😅
Always fun roping in windows. Spray way is great for cleaning prior to paint, I use it all the time
Ich benutzte immer eine Wäscheleine, die ist max. 2mm dick und sehr stabil mit innenliegender Edelstahlseele. Die Kordel die ihr benutzt ist zu stark im durchmesser
Take soap and a cable instead of a rope. Cables doesn't snap.
Awesome video this beetle has the coolest patina. Have you guys tried POR-15 for rust?
I used por 15 on my pans and the finish is great for minimal effort.
Two words: space heater.
Did I hear some heavy hitters playing during the spare tire rub getting welded in?
Oh absolutely! Haha
16g automotive wire and WD40. It won't break and it works 100 times better. THEN you use the glass cleaner.
Guys... grab a propane heater to warm your garage. #Southernlivingprotip
I keep hearing you say its a giveaway but havent heard what you have to do to be entered in to win unless i just missed it
The car isn’t finished yet, and I’m still wading through all of the logistics of it!
Where is the best place to find window rubber sold by the foot? I have a 51 Plymouth that needs a windshield gasket and the pre-molded kit is way outside of my budget.
If you know you know yep I know are both of you taken or is one of you single maybe the guy without the mustache?😂
I’d say 95% of air cooled guys don’t run the 4th bolt lol